Tire Safety Tips: General Guidance for Drivers
Plain tire safety guidance for drivers: pressure and tread checks, reading sidewall markings, spotting sidewall damage, and handling tires safely at home.
Contents
Tire safety tips for drivers come down to a few checks and habits that keep a car predictable on the road. This page covers pressure and tread checks, what the sidewall markings tell you, how tire age and condition affect safety, and how to lift and roll a tire without hurting yourself. Each point is written so you can act on it before your next drive.
Pressure and tread checks
Tire pressure and tread depth are the two checks that tell you the most about a tire's condition. Measure pressure with a gauge when the tires are cold, and compare the reading to the value on the vehicle placard or in the owner's manual. Check tread depth in several grooves across the tread, not just one spot, because uneven wear points to an alignment or inflation problem. A tire that loses pressure repeatedly or shows cord through the tread needs a professional inspection.
Reading the sidewall markings
Sidewall markings carry the size, load index, speed rating and a date code that tells you when the tire was made. Tire age matters because rubber changes with time and exposure, even when the tread looks deep. Sidewall damage signs include bulges, cuts, cracks and exposed cords, and any of these means the tire should come off the road. The markings also give the maximum inflation pressure, which is a limit and not a target for everyday driving.
Safe lifting and rolling tires
A tire is heavy and awkward, so safe tire handling starts with your footing and your back. Lift with your legs, keep the tire close to your body, and roll it on its tread instead of carrying it farther than you need to. Use a stable jack and place a support stand under the vehicle before you reach near a wheel arch, because a jack alone can slip. Mounting, balancing and any repair of the tire itself belongs with a trained technician.
Questions about tire safety
What are the basic tire safety rules for a car?
Car tire safety rules cover pressure, tread, condition and load. Check pressure with a gauge while the tires are cold, inspect tread depth across the width of the tire, and look for bulges or cuts on the sidewall. Keep the load within the rating on the sidewall markings, and have a technician inspect any tire that looks damaged.
What tire safety topics should a guest driver know?
A guest driver should know the pressure and tread check routine before taking a borrowed car on the road. Guest driver tire safety also means looking at the sidewall for bulges or cracks and knowing where the spare and the gauge are kept. If the car pulls to one side or vibrates, stop and have the tires checked rather than continuing the trip.
When does tire age make a tire unsafe?
Tire age becomes a safety concern when the rubber shows cracking, hardening or a loss of grip, whatever the tread depth. The date code on the sidewall tells you when the tire was produced, and a technician can judge whether age and condition together make it unfit. A tire stored in harsh sunlight or used at low pressure tends to age faster.
How do I handle a tire safely when changing a wheel?
Safe tire handling means lifting with your legs, keeping the tire close to your body and rolling it rather than carrying it far. Park on level ground, chock the wheels and use a support stand under the vehicle before you put any part of your body under it. If you are unsure about the jack points or the wheel torque, let a trained technician do the job.