# Tire Markings: First Steps

Start reading tire markings with a plain guide to the sidewall: section width, aspect ratio, rim diameter, load index, speed rating and the DOT code.

Tire markings are the letters and numbers molded into the sidewall, and the first step is to learn them in order. Read the size designation first, then the [load index and speed rating](/articles/tire-load-index-load-range-speed-ratings-material-44528/), and leave the DOT code for last. This page gives a beginner guide to each element in that learning sequence, so a first look at a sidewall turns into a clear reading. 

## Read the size designation first 

Tire size first steps begin with the size code, which sits in large characters on the sidewall. A P-metric or Euro-metric format starts with a letter or a space, then the section width in millimeters. A slash separates the width from the aspect ratio, and the rim diameter follows after a letter such as R for radial. Read the three numbers in that order and you have the tire dimensions. 

## What the size numbers mean 

The section width is the width of the tire from sidewall to sidewall, stated in millimeters. The aspect ratio gives the sidewall height as a percentage of that width, so a smaller number means a lower sidewall. The rim diameter is the wheel size the tire fits, given in inches. These three figures form the [tire size code](/articles/tire-size-markings-width-aspect-ratio-construction-rim-size-material-44540/) and drive any size comparison. 

## Load index, speed rating and DOT 

After the size, a load index and a speed rating show how much weight the tire carries and how fast it may run. A load index is a code number for a weight table, and the speed rating is a letter tied to a maximum speed. The DOT code follows on the lower sidewall, and its last digits give the DOT date code, the week and year of manufacture. A max inflation pressure figure also appears there, and it is a ceiling, not a target. 

## Beginner Questions About Sidewall Markings 

### How do I read tyre markings on a sidewall? 

Tyre markings are read from the largest size code outward, and the sidewall reading basics stay the same for any vehicle. Start with the width, aspect ratio and rim diameter, then note the load index and speed rating. Finish with the DOT code and the max inflation pressure, which are printed in smaller text. 

### What is a tire markings checklist for a first car? 

A tire markings checklist for a first car covers four items and keeps the order fixed. Check the size designation, the load index and speed rating, the DOT date code, and the max inflation pressure. Write the size down so a replacement matches it, and confirm the wheel diameter before you buy. 

### What do the sidewall numbers mean on a rental car tire? 

Sidewall numbers on a rental vehicle tire mean the same as on any other car, so the size code reads the same way. The width, aspect ratio and rim diameter are followed by the load index and speed rating. A rental car tire marking check helps you confirm the size before you drive, but any repair belongs with the rental company. 

### What is the learning order for tire sidewall markings? 

The beginner order of study starts with the tire size format and moves to the load index and speed rating. The DOT code and its date come next, and the max inflation pressure closes the sequence. Learning tire markings in that order keeps each number connected to the part it describes.
