# Tire Maintenance by Tire Size

How tire size numbers, aspect ratio, section width and rim diameter shape inflation pressure, rotation, tread wear checks and mixed size fitment care.

Tire maintenance by tire size means matching pressure, rotation and wear checks to the dimensions printed on the sidewall. The size designation gives section width, aspect ratio and rim diameter, and those figures set the air volume, the load the tire carries and how wear shows up. Knowing which number does what keeps a size change from turning into uneven tread wear or a pressure error. 

## Read the sidewall size numbers 

Sidewall tire size markings state section width, aspect ratio and rim diameter in one line. Section width is the tire's width across the sidewall, and the aspect ratio is the sidewall height as a share of that width. Rim diameter tells you which wheel the tire fits, so the three numbers work as a set. A [tire size calculator](/articles/tire-size-calculator-diameter-comparison-material-44527/) or chart turns those markings into overall diameter for comparison, but the sidewall remains the source. 

## Pressure follows the size and load 

Inflation pressure for the size comes from the vehicle placard and the tire load index, not from a single figure that suits every tire. A wider or taller tire holds more air volume, so the same pressure reading can behave differently after a size change. The load index on the sidewall shows how much weight the tire carries at its rated pressure. Check pressure cold and compare it against the placard for the fitted size. 

## Rotation and wear after a size change 

Tire rotation keeps tread wear even by moving each wheel to a new position on a set schedule. Rotation limits with different sizes apply when a vehicle runs mixed tire sizes, because front and rear cannot swap if the dimensions differ. Plus sizing maintenance means checking overall diameter and clearance before assuming a larger rim keeps the same geometry. Tread wear checks and a balance check after any size change show whether the fit is working. 

## Tire Size Maintenance Questions 

### Does tire pressure change when I change tire size? 

Tire pressure by size does change when the new tire carries a different load index or air volume. The placard figure is written for the original size, so a size change calls for the pressure that matches the new tire's load rating. Check the sidewall markings and confirm the correct figure before driving on the new set. 

### Can I run mixed tire sizes on one vehicle? 

Mixed tire size maintenance is possible only when the vehicle is built for it and the overall diameters stay within the allowed difference. Tread wear on mismatched tires runs unevenly, and rotation between axles is no longer possible. Check the owner's manual for the permitted front and rear sizes before fitting. 

### What does the aspect ratio mean for tire care? 

[Tire aspect ratio](/articles/tire-aspect-ratio-what-the-ratio-on-a-tire-size-means/) tells you the sidewall height as a percentage of section width, and a lower ratio means a shorter sidewall. Low profile tire care needs closer attention to pressure because a short sidewall hides damage and gives less warning of underinflation. Check tread depth and sidewall condition more often on a low profile set. 

### How do I compare two tire dimensions? 

Tire diameter and width comparison uses the sidewall numbers to work out overall diameter, which is the figure that matters for clearance and speedometer accuracy. A tire comparison tool or size chart converts the markings into those dimensions. Compare the result against the original size before you buy a replacement.
