Tire Dynamic Rolling Radius and How to Calculate It

Learn what the tire dynamic rolling radius is, how it differs from the loaded radius, and how to calculate it from loaded radius or a roll-out test.

3 min read5 viewsTire Dynamic Rolling Radius and How to Calculate It
— · 0 votes
Contents
  1. Meaning of tire rolling radius
  2. Loaded radius versus dynamic radius
  3. Formula and roll-out measurement
  4. Questions about tire rolling radius
  5. How do you calculate the rolling radius of a tyre?
  6. What is the difference between loaded radius and dynamic rolling radius?
  7. Can a tire dynamic rolling radius calculator replace measurement?
  8. How is rolling circumference used for tire speed calculation?

The tire dynamic rolling radius is the distance from the wheel center to the road that turns the wheel's rotation into forward travel, and it sits between the free radius and the loaded radius. This page explains what the term means, how the loaded radius and loaded rolling radius relate to it, and how to calculate or measure the value for a tire. It also covers the dynamic rolling radius formula, speed calculation, and why a calculator gives only an estimate until you measure the tire under load.

Meaning of tire rolling radius

Tire rolling radius is the distance from the axle center to the ground under a loaded tire. The free radius is measured with no load, so the tire sits taller and the radius is larger. Once the tire carries the vehicle, the sidewall flexes and the distance to the road shrinks to the loaded radius. Tire rolling radius meaning therefore depends on which condition you measure, because the same tire gives a different number at rest and under load.

Loaded radius versus dynamic radius

The loaded radius is a static measurement taken with the tire standing still under the vehicle's weight. The dynamic rolling radius is smaller than the loaded radius because tire deflection during rolling and the contact patch change the distance the wheel actually travels. The effective rolling radius is another name for this rolling value used in tire speed calculation. A tire dynamic loaded radius taken at rest is a starting estimate, not the final driving value.

Formula and roll-out measurement

The dynamic rolling radius formula divides the rolling circumference by two times pi. You get rolling circumference from a rolling circumference roll-out test: mark the tire and the ground, roll one full revolution, and measure the distance traveled. Divide that distance by two pi to get the radius. A tire dynamic rolling radius calculator uses the same relation, but the measurement procedure decides the accuracy.

Questions about tire rolling radius

How do you calculate the rolling radius of a tyre?

You calculate tyre rolling radius by dividing the rolling circumference by two times pi. Measure rolling circumference with a roll-out test, or take the loaded radius and adjust it for deflection. The result is the effective rolling radius used for gearing and speed work.

What is the difference between loaded radius and dynamic rolling radius?

The loaded radius is measured with the tire standing under load, while the dynamic rolling radius applies while the tire rolls. Rolling changes deflection and the contact patch, so the dynamic value is smaller than the static loaded radius. Use the loaded radius only as an estimate of the rolling value.

Can a tire dynamic rolling radius calculator replace measurement?

A tire dynamic rolling radius calculator cannot replace measurement, because it works from assumed dimensions and deflection. The real value comes from a roll-out test or a loaded measurement on the actual tire. Treat calculator output as an estimate and confirm it by measuring the tire.

How is rolling circumference used for tire speed calculation?

Rolling circumference converts wheel rotation into distance traveled, which drives tire speed calculation. Speed equals revolutions per unit time multiplied by rolling circumference. The dynamic rolling radius gives the same result through the circumference relation.

Latest articles