# Tire Dimension Diagram

A tire dimension diagram shows sidewall numbers, section width, aspect ratio, rim diameter and overall height. Learn to read each label and draw tires to scale.

A tire dimension diagram turns the sidewall numbers into a labeled drawing of the tire's cross-section. It shows section width, aspect ratio, rim diameter, sidewall height and overall diameter in one view. Reading these labels lets you [compare two tire sizes](/articles/tire-size-calculator-diameter-comparison-material-44527/) before you buy. 

- The sidewall marking drives every label, so start with the width, aspect ratio and rim diameter numbers.
- Section width is the widest point of the tire, measured across the inflated body without load.
- Aspect ratio is sidewall height as a percentage of section width, so it changes height when width changes.
- Overall diameter equals rim diameter plus two sidewall heights.
- A to-scale drawing shows how two sizes differ in width and height at a glance.
 

## What a tire dimension diagram shows 

A tire dimension diagram is a labeled cross-section of a tire mounted on a rim. It places a name on each geometry line: section width, section height, [rim diameter and overall diameter](/articles/tire-overall-diameter-calculation-and-calculator/). The drawing also shows the bead seat, the inner circle where the tire grips the rim. 

The two halves of the diagram make the numbers usable. The sidewall labels explain the marking on the tire, while the geometric labels show what each number measures. A reader can then connect the number 205 to a width line and the number 55 to a height line. 

A tire specs diagram keeps the proportions honest when it is drawn to scale. A scaled tire diagram shrinks or grows the outline, so a wide, low tire looks different from a narrow, tall one. That visual honesty is the point of a tire dimension infographic used for comparison. 

## Reading the sidewall marking in the diagram 

Sidewall labels in a tire size diagram follow one pattern for metric passenger tires. A marking such as 205/55R16 means section width 205, aspect ratio 55 and rim diameter 16. The R stands for radial construction, not a measurement. 

The first number is section width in millimeters at the widest point of the inflated tire. The second number is the aspect ratio, and it has no unit because it is a percentage. The third number is the rim diameter in inches, so the diagram mixes units by design. 

A tire size number diagram should show where [load index and speed rating](/articles/tire-load-index-load-range-speed-ratings-material-44528/) sit outside the three size numbers. Those codes appear after the size and describe capacity and speed, not geometry. Keep them on the sidewall label in the drawing and label them separately. 

- Section width in millimeters at the widest inflated point
- Aspect ratio as a percentage of section width
- Construction letter such as R for radial
- Rim diameter in inches at the bead seat
- Load index and speed rating as separate codes
 

## Section width, tread width and sidewall width 

Section width and tread width are different lines on a tire dimension diagram. Section width is the widest part of the body, while tread width covers only the part that touches the road. The tread is narrower than the section on a rounded shoulder design. 

Sidewall width labels can mislead a reader because the sidewall is a surface, not a single width line. The sidewall carries the marking and the sidewall height measurement. The diagram should show sidewall height as a vertical distance from rim to tread edge. 

A tire measurements diagram often labels the overall width at the widest point and the tread width at the contact patch. Keeping both lines separate answers the question of why a 205 tire does not measure 205 across the tread. The section width number describes the body, not the rubber touching the road. 

## Aspect ratio as a visual height 

The aspect ratio visual diagram shows sidewall height as a share of section width, not as a fixed number. A ratio of 55 means the sidewall height equals 55 percent of the section width. The diagram draws that relationship as a smaller vertical segment beside the wide horizontal segment. 

A width aspect ratio diagram helps a reader see why two tires with the same rim diameter can have different overall heights. A wider section with the same ratio produces a taller sidewall. The drawing must scale both numbers together to stay truthful. 

Section height and sidewall height are the same measurement under two names in most diagrams. The sidewall height label usually sits between the rim edge and the tread surface. A reader can then calculate the sidewall in millimeters by multiplying section width by the ratio and dividing by one hundred. 

## Calculating overall diameter from the labels 

Overall diameter in a tire dimension diagram equals rim diameter plus two sidewall heights. The rim diameter is in inches and the sidewall height is in millimeters, so the diagram must convert one unit first. That conversion step belongs on the drawing as a small note. 

A reader can find sidewall height by multiplying section width by the aspect ratio and dividing by one hundred. Adding twice that height to the converted rim diameter gives overall diameter. The labeled cross-section then shows the two sidewall bands above and below the rim circle. 

Overall diameter drives speedometer readings and clearance, so the diagram should show it as the full outer circle. A change in overall diameter changes the distance traveled per wheel turn. The drawing makes that outer circle the reference for any size comparison. 

## Drawing a tire to scale 

To draw a tire to scale, pick one unit per millimeter and keep it constant for width and height. Draw the rim circle first at the stated rim diameter converted to the same unit. Add the sidewall height on both sides, then close the outer circle at the overall diameter. 

A to-scale tire drawing needs the section width as a horizontal line through the center. The sidewall labels sit on the outer face, while dimension labels use thin lines with arrow ends. Keep the tread width line separate from the section width line to avoid a false outline. 

The scaled tire diagram then shows the tire outline proportions without hype. A narrow, tall tire and a wide, low tire drawn side by side reveal differences that numbers alone hide. Any hand drawing or digital file works as long as the scale stays fixed. 

- Choose one unit per millimeter and note it on the drawing
- Draw the rim circle at the converted rim diameter
- Add sidewall height above and below the rim
- Close the outer circle at overall diameter
- Mark section width through the center line
- Add tread width as a separate narrower line
 

## Building a side-by-side size comparison 

A side-by-side tire size diagram places two scaled outlines on one baseline so the differences show. Align the rim centers and let the outer circles differ in width and height. The aligned centers make the height change easy to see. 

A visual size comparison works when both tires use the same scale and the same rim diameter reference. Mixing scales destroys the comparison, even if the numbers are correct. Label each outline with its size and its calculated overall diameter. 

The side-by-side size outline answers questions that a single tire size diagram cannot. A reader sees whether a wider tire also grows taller and whether clearance changes. The drawing becomes a tire dimension visual aid for a fitment decision rather than a decoration. 

## Designing a clear tire dimension infographic 

A tire size infographic layout works when the labels are readable and the geometry lines are thin. Put the sidewall marking large at the top and connect each number to its dimension line. Use one color for the tire body and a contrasting color for dimension arrows. 

Tire dimension labels should sit outside the tire outline to avoid covering the shape. Leader lines connect each label to its point on the drawing. A legend for the units, millimeters and inches, prevents confusion on a mixed-unit diagram. 

[Tire terminology](/articles/common-tire-vocabulary-explained-from-sidewall-numbers-to-rims-and-wide-tires/) on the drawing should match the sidewall wording a reader sees on the tire itself. Use section width, aspect ratio, rim diameter and overall diameter as the four anchor labels. A clean tire dimension infographic repeats those four names consistently across every panel. 
| Label | What it measures | Unit | Where it sits on the drawing | 
| Section width | Widest point of the inflated body | Millimeters | Horizontal line through the center | 
| Aspect ratio | Sidewall height as a share of section width | Percent | Ratio note beside the sidewall | 
| Rim diameter | Bead seat circle of the wheel | Inches | Inner circle of the cross-section | 
| Sidewall height | Distance from rim edge to tread | Millimeters | Vertical segment above the rim | 
| Overall diameter | Full outer circle of the tire | Millimeters or inches | Outer circle through the tread |  

## Tire Dimension Diagram Questions 

### How do tire sizes work in a diagram? 

Tire sizes work in a diagram by mapping the three sidewall numbers to three geometry lines. Section width becomes the horizontal body line, the aspect ratio becomes the sidewall height share, and rim diameter becomes the inner circle. The diagram then adds overall diameter as the outer circle. 

### What does the aspect ratio look like on a tire diagram? 

The aspect ratio appears as a sidewall height segment drawn in proportion to the section width. A ratio of 55 draws the sidewall at 55 percent of the width line. That visual proportion shows why a lower ratio tire looks flatter. 

### How can I draw a tire to scale for a size comparison? 

Drawing a tire to scale needs one fixed unit per millimeter for both width and height. Draw the rim circle first, add sidewall height on both sides, and close the outer circle at overall diameter. Align two outlines at the rim center for a fair side-by-side comparison. 

### What is the difference between section width and tread width in a diagram? 

Section width is the widest point of the inflated tire body, while tread width is the part that touches the road. A tire dimension diagram draws them as two separate horizontal lines. The tread line sits inside the section line on a rounded shoulder. 

### Can a tire dimension diagram show overall diameter without calculation? 

A tire dimension diagram can show overall diameter as a labeled outer circle only after the sidewall height is calculated. The sidewall height comes from section width times the aspect ratio, then the rim diameter is converted to the same unit. The diagram then labels the resulting outer circle. 

### Which labels belong on a tire specs diagram? 

A tire specs diagram needs section width, aspect ratio, rim diameter, sidewall height and overall diameter as its core labels. Tread width and load index can be added as separate notes. Keeping the core five labels consistent makes the drawing easy to read.
