Tire Crown Profile and Crown Shape
Learn what tire crown profile and tread shape mean, how crown radius and the center tread arc are measured, and why camber changes the contact patch.
Contents
The tire crown profile is the curve of the tread surface across the width of the tire, from one shoulder to the other. This page explains the crown shape of tire tread, how crown radius and tread crown curvature define it, and how camber and crown contact work together on the road.
What the crown radius controls
Crown radius is the radius of the arc drawn across the tread when the tire is seen from the front. A smaller crown radius gives a rounder tread crown, while a larger radius gives a flatter tread profile across the width. The crown radius sets how the tire crown meets a flat road, so it shapes the contact patch before any load or camber is applied.
Reading the center tread arc
The center tread arc is the curved line that runs across the middle of the tread, and it defines the tread shape a driver sees head-on. A tire crown measurement records this arc, often as a rise from the shoulder line to the center of the tread. Comparing that rise against the tread width tells you how curved the tire crown shape is in practice.
Camber and crown contact
Camber and crown contact interact because the crown curve and the wheel angle both decide where the tread presses on the road. A cambered wheel rolls onto one shoulder, and a pronounced crown concentrates load on a narrow band of tread. A flatter tread profile spreads cambered load over more of the crown, which changes grip and wear across the width.
Questions About Tire Crown Shape
What is a tire crown profile?
A tire crown profile is the cross-sectional curve of the tread surface from shoulder to shoulder. The crown profile describes how rounded or flat the top of the tire is when viewed from the front. It is defined mainly by the crown radius and the height of the center tread arc above the shoulders.
How is tire crown shape different from tread shape?
Tire crown shape is the overall curve of the tread across the tire width, while tread shape can also refer to the pattern of blocks and grooves. The crown shape of tire tread is a geometric property of the carcass and tread band, not of the rubber pattern. Tread shape in the pattern sense sits on top of that curve.
How do you measure a tread crown?
You measure a tread crown by finding the high point at the center of the tread and the reference line at the shoulders. The difference between them is the crown rise, and the tread crown curvature follows from that rise and the tread width. A profile gauge or a straight edge with a depth reading gives the tire crown measurement.
Does camber change where the crown touches the road?
Camber does change where the crown touches the road, because tilting the wheel moves load toward one shoulder. With positive or negative camber, the contact patch shifts off the center of the tread crown. Matching camber to the crown radius keeps the tread profile loaded more evenly across its width.
Read next
-
Comparing Motorcycle Tire Crown Profiles: Sidewall Numbers and Shape
-
Tire Cross-Sectional Profile: Understanding Its Shape and Dimensions
-
Tire Crown Radius: Meaning, Measurement and Calculation
-
Tire Shoulder Shape: Rounded and Square Profiles Explained, Starting With the Sidewall Numbers
-
How Rim Width Affects Tire Cross-Sectional Profile