# Tire Compatibility Chart: Matching Tire Sizes to Wheels

How to read a tire compatibility chart: match sidewall size markings, bead diameter and approved rim width ranges so a tire and wheel fit safely.

A tire compatibility chart links three numbers: the tire size designation on the sidewall, the wheel diameter and the approved [rim width range](/articles/approved-rim-widths-by-tire-size-checking-tire-and-rim-compatibility/). Matching a tire to a wheel means the bead diameter agrees and the tire's width sits inside the rim width range the tire maker approves. The chart tells you what fits; the sidewall and the wheel markings supply the numbers you compare. 

- Read the sidewall size designation first: section width, aspect ratio and bead diameter are the numbers a chart compares.
- Wheel diameter and tire bead diameter must match exactly; a difference of one inch is not a fit.
- Tire width must fall inside the approved rim width range for that size, not just near the rim width.
- [Load index and speed rating](/articles/tire-load-index-load-range-speed-ratings-material-44528/) belong to the tire, and they must meet what the vehicle needs after the size fits.
- A chart confirms geometry, but a trained technician should check clearance, inflation and mounting.
 

## What a tire compatibility chart compares 

A tire compatibility chart compares the size designation molded into the tire sidewall with the dimensions of the wheel it mounts on. The sidewall size numbers give section width, aspect ratio and bead diameter in one string. The chart translates those numbers into the rim width range and wheel diameter that accept the tire. 

Tire size to wheel matching rests on three checks that a chart makes visible at once. Bead diameter must equal wheel diameter, tire width must fall inside the approved rim width range, and the overall tire diameter should stay close to the original fitment. A fitment chart is only a lookup aid, and the tire maker's own data governs the final answer. 

Charts differ in how much they show, so read the column headings before trusting a row. Some list only rim diameter and section width, while others add the recommended rim width and a full rim width range. A chart built from one standard may not cover sizes published under another standard. 

## Reading the sidewall size designation 

The tire size designation is the starting point of every compatibility check, and it sits on the sidewall as a single code. A typical metric code such as 225/45R17 gives section width in millimeters, aspect ratio as a percentage of that width, and bead diameter in inches. The letter R marks radial construction, which describes how the cords run, not the rim size. 

Sidewall markings also carry the load index and speed rating after the size code, and those figures belong to the tire rather than the wheel. Light truck sizes may appear in a flotation format with the diameter first, and some commercial sizes use a different width convention. Reading the whole sidewall prevents a size match that ignores the load and speed figures. 

Section width on the sidewall is measured on a specific measuring rim, so the tire looks wider or narrower on a rim of another width. Aspect ratio converts that width into sidewall height, and sidewall height changes the overall tire diameter. A size designation therefore describes the tire, while the chart describes the rims that accept it. 

## Approved rim width range explained 

The approved rim width range is the span of rim widths on which a tire maker permits a given tire size to be mounted. Its middle value, the recommended rim width, is the measuring rim used to publish the tire's dimensions. Mounting inside the range keeps the tread shape and sidewall curve within the design intent. 

Rim width is measured between the bead seats, not across the outer flanges, so a rim that looks wide may measure narrower than expected. A tire squeezed onto a rim below the range folds its sidewall inward and distorts the tread. A tire stretched onto a rim above the range pulls the beads outward and leaves less sidewall to absorb road input. 

Rim width ranges are published by standards bodies such as ETRTO and JATMA, and tire makers often publish their own approved rim width list. Where those sources disagree for a size, the tire maker's specification for that model takes precedence. Checking the approved range for the exact tire, not a similar one, avoids a near miss. 

## Wheel diameter and bead diameter must agree 

Wheel diameter and tire bead diameter form the one match with no tolerance: they must be the same size. The bead seat diameter is the ledge inside the rim where the tire bead sits, and the wheel diameter chart lists it in inches for most passenger sizes. A 16-inch tire cannot seat on a 17-inch wheel, however close the widths look. 

Bead diameter is not the same as the rim's outer lip diameter, and mixing the two produces a wrong reading. Wheel diameter charts normally quote the nominal bead seat size that appears in the tire code. Where a size uses a half-inch bead diameter, the chart and the sidewall both show that half inch. 

Tire diameter compatibility is a separate matter from bead diameter, and it concerns overall height rather than the seat. Overall tire diameter follows from bead diameter, [section width and aspect ratio](/articles/comparing-tire-width-and-aspect-ratio/) together. A change in overall diameter alters speedometer reading and clearance, so compare it against the original fitment before choosing. 

## Using the chart step by step 

Tire size to wheel matching works from the tire outward, because the tire carries the size code you must satisfy. Find the size designation, read its bead diameter and section width, then look up the approved rim width range for that exact size. Compare the result with the wheel markings before any tire is ordered. 

A wheel width and [tire size chart](/articles/commercial-truck-and-bus-tire-sizes-common-sizes-and-their-dimensions/) returns candidates rather than a verdict, since several tire widths can share one rim. Pick the width whose recommended rim width sits closest to the actual rim, then confirm the approved range covers it. Confirm also that overall tire diameter stays within the range the vehicle was built for. 

Checking the load index and speed rating completes the match, because a size that fits geometrically can still be wrong for the vehicle. Clearance to suspension, brakes and bodywork needs a physical check on the vehicle. A trained technician should confirm the final combination before mounting. 

## Rim width and tire width relationship 

Rim width and tire width interact, and the chart expresses that interaction as the approved rim width range. A wider rim pulls the tire's section wider and flattens the tread slightly, while a narrower rim rounds the tread and narrows the section. Both effects stay acceptable only inside the approved range. 

A rim width chart lists rim widths in half-inch steps, and those steps are what the tire range is checked against. Moving one step within the range changes steering feel and tread wear pattern without breaking the fitment. Moving outside the range takes the tire beyond the shape its maker designed. 

The wheel width and [tire width chart](/articles/tire-width-chart/) is not symmetric, so a rim near the top of one tire's range may sit low in another tire's range. Every tire size carries its own approved range, even when two sizes look alike on the sidewall. Compare the tire you intend to buy, not a size that seems equivalent. 

## Chart limits and when to ask a specialist 

A tire rim compatibility chart confirms geometry and nothing beyond it, so it cannot certify a combination as safe on its own. The chart does not know the vehicle's load, the brake clearance or the condition of the wheel. Fitment error prevention depends on physical checks that no table can perform. 

Wheel size compatibility charts built for one market or one standard may omit sizes sold elsewhere, and a missing row is not proof of incompatibility. Absence from a chart means the source did not list the size, so check the tire maker's specification directly. Treat any mismatch between chart, sidewall and rim marking as a reason to stop. 

Mounting and inflation carry real risk, and a tire that bursts during seating can injure the person beside it. A trained technician should mount tires, seat beads and verify clearance on the vehicle. Ask a specialist whenever the approved range, the wheel marking or the vehicle requirement is unclear. 

## Tire and Wheel Fitment Questions 

### What is a tire compatibility chart used for? 

A tire compatibility chart is used to check whether a tire size can be mounted on a given wheel. It compares the sidewall size designation with the wheel diameter and the approved rim width range for that tire. The chart confirms geometry, and physical checks on the vehicle still follow. 

### How do I read a wheel width and tire size chart? 

A wheel width and tire size chart is read from the tire side, starting with the size designation. Find your tire size, note its bead diameter and section width, then read the approved rim width range in that row. Compare the range with the rim width marked on the wheel before deciding. 

### Does rim width have to match tire width exactly? 

No, rim width does not have to match tire width exactly, and it rarely does. Each tire size has an approved rim width range, and any rim width inside that range is permitted. The recommended rim width within the range is the measuring rim the tire maker used. 

### Can I fit a tire to a wheel with a different diameter? 

No, a tire cannot be fitted to a wheel with a different bead diameter. The bead seat diameter of the tire and the wheel diameter must be identical, because the beads seat on that ledge. A difference of even one inch prevents correct seating and creates a serious hazard. 

### What else must match besides tire and wheel size? 

Load index and speed rating must also match what the vehicle requires, in addition to tire and wheel size. Overall tire diameter should stay close to the original fitment so clearance and speedometer reading stay correct. A trained technician should confirm all of these before mounting.
