Tire Code and DOT Code Reading Errors
Learn why DOT codes and tire sidewall codes get misread, which digits carry the week and year, and how to check a date stamp before trusting it.
Contents
- What the DOT code contains
- How the week-year digits work
- Where misreading starts on the sidewall
- Mistakes that change the date
- Checking a date stamp step by step
- Why a wrong date matters
- Reducing errors when you record codes
- Questions about tire code errors
- What are the usual DOT code reading errors?
- What causes tire code reading problems at the sidewall?
- How can I avoid a DOT date code misreading?
- Which digits in the DOT code give the week and year?
- Does a date stamp error mean the tire is unsafe?
Tire code reading errors happen when a sidewall marking is misread, miscopied, or partly worn away. The DOT code on a tire hides a plant code and a week-year date, and those digits are where mistakes start. Reading the code in the right order, with the tire clean and well lit, prevents most of them.
- The DOT code ends in four digits that give the week and year of manufacture.
- Digits before the date identify the manufacturing plant and the tire size or type.
- A single swapped or skipped digit changes the date code completely.
- Dirt, curb damage, and shallow molded lettering cause many reading problems.
- Compare the sidewall marking with the tire identification number on both sides when you can.
What the DOT code contains
The DOT code is a sequence molded into the sidewall that identifies a tire for tracing and safety recalls. It starts with the letters DOT and continues with a string of digits and letters. The final group of four digits is the date code, and the digits before it describe the plant and the tire itself.
A manufacturing plant code sits inside the DOT string and points to the factory that built the tire. The plant code is not a date and does not change with the batch. Readers who treat the plant digits as a date produce a wrong age for the tire.
The tire identification number is the full DOT string, not just the date portion. Copying the whole number, in order, keeps the plant and date parts together. A partial copy that drops the leading digits is a frequent source of confusion.
How the week-year digits work
The week and year of manufacture are given by the last four digits of the DOT code. The first two of those digits are the week of the year, and the last two are the year. A code ending in 2319 means the twenty-third week of 2019.
Week numbers run from 01 to 52, and the year is shown as two digits. A week value above 52 is a reading error, not a real date. Spotting an impossible week is a quick way to catch a misread.
Older tires may carry a three-digit date code from before the four-digit format was used. The week-year digits on those tires need a different reading, and the year is less certain. Treat an old three-digit stamp with care when you judge a tire's age.
Where misreading starts on the sidewall
The sidewall tire code is molded into rubber, so lettering can be shallow, curved, or partly filled with dirt. Lighting from one side casts shadows that turn a 3 into an 8 or a 5 into a 6. Cleaning the area and lighting it from two angles removes much of that risk.
Curb damage and scuffing can erase part of the date stamp errors area without touching the rest of the code. A worn patch over the last digits makes the week and year unreliable. Check the same code on the inner sidewall when the outer face is damaged.
Reflection from a wet or glossy sidewall hides edges of the digits. Drying the tire and viewing it straight on, rather than at a steep angle, gives a cleaner read. Photograph the code from close range and enlarge it to confirm each digit.
Mistakes that change the date
DOT date code misreading often comes from reading the digits right to left or starting at the wrong group. The date sits at the very end of the string, so count back four digits from the last character. Any other starting point gives a wrong week and year.
Similar-looking characters cause errors, such as a 0 read as an 8 or a 1 read as a 7. The molded font on a tire is not the same as a printed font on paper. Compare each digit with the others in the same code before you decide.
Copying the code by hand or from a photo introduces its own mistakes, such as a dropped digit or a swapped pair. Write the digits one at a time and read them back. A second check against the physical tire settles any doubt.
Checking a date stamp step by step
A careful date stamp check follows the same order every time and gives a result you can trust. The steps below keep the plant code and the date code separate in your notes.
Work on a clean, dry sidewall in good light and read from the DOT letters to the end of the string. Do not skip ahead to the last four digits before the rest is clear. If any character is unclear, change the lighting and read it again.
Record the full tire identification number and mark where the date digits begin. Confirm the week falls between 01 and 52 and the year matches the two final digits. When the two sidewalls disagree, stop and have a trained tire technician inspect the tire.
- Clean and dry the sidewall area around the DOT code.
- Light the code from two angles to remove shadows.
- Read the full DOT string from the letters to the end.
- Count back four digits to find the date code.
- Check the week is between 01 and 52.
- Read the last two digits as the year.
- Repeat the read on the other sidewall and compare.
Why a wrong date matters
A misread date code leads to a wrong age for the tire and poor decisions about its condition. Rubber ages with time and exposure, and the date on the sidewall is the main record of when the tire was built. An error of a few digits can make an old tire look new on paper.
Recall checks depend on the full tire identification number, not the date alone. A misread digit can hide a tire from a safety recall. The plant code and the size digits matter as much as the week and year for that check.
Age is one factor among several, and the date code does not describe wear or damage. Cracks, bulges, and tread condition still need a physical inspection. A trained tire technician should judge whether a tire is fit for use.
Reducing errors when you record codes
Writing down tire codes accurately is easier with a fixed method and a second pass. The aim is a record that matches the sidewall character for character. Small habits remove most of the slip-ups.
Group the digits as you copy them instead of writing the whole string at once. Read back each group against the tire before moving on. Keep the plant code and the date code in separate fields so they cannot be confused later.
Store a clear close-up photo next to the written record for later checking. A photo shows the molded lettering as it really is, including any wear. Where the sidewall is damaged or the code cannot be read with confidence, ask a tire technician to verify it.
Questions about tire code errors
What are the usual DOT code reading errors?
The usual DOT code reading errors are reading the wrong group of digits, reversing the order, and confusing similar molded characters. Dirt, shadow, and curb damage add to them. Reading the full string from the DOT letters to the end, in good light, prevents most of these mistakes.
What causes tire code reading problems at the sidewall?
Tire code reading problems at the sidewall come from shallow molded lettering, dirt in the digits, and damage over part of the code. Lighting from one angle can hide the edges of a character. Cleaning and drying the area and viewing it straight on makes each digit easier to confirm.
How can I avoid a DOT date code misreading?
You avoid a DOT date code misreading by counting back four digits from the end of the string and checking the week falls between 01 and 52. Confirm the result on the other sidewall and with a close-up photo. Any character you cannot read clearly should be checked by a tire technician.
Which digits in the DOT code give the week and year?
The last four digits of the DOT code give the week and year of manufacture. The first two of the four are the week and the final two are the year. All digits before that group belong to the plant code and the tire identification.
Does a date stamp error mean the tire is unsafe?
A date stamp error does not by itself mean a tire is unsafe, because it is a reading problem rather than a physical defect. The true age and the tire's condition still need a proper check. A trained tire technician should inspect any tire whose markings are damaged or unclear.