Tire CAD Modeling: Building a Tire Model from Its Dimensions
Learn how to turn sidewall numbers into a tire CAD model: calculate the profile, revolve the sketch, add constraints and export STL for 3D printing.
Contents
- What a tire CAD model actually represents
- Reading tire dimensions from the sidewall code
- Calculating sidewall height and overall diameter
- Sketching the tire cross-section profile
- Revolving the sketch into a 3D tire
- Making a parametric tire model with constraints
- Producing a tire CAD drawing and file formats
- Preparing an STL export for 3D printing
- Questions about tire CAD models
- How do I make a tire model from the size code?
- Can I download a tire file instead of modeling one?
- What is the difference between a geometric and a simulation tire model?
- Which CAD software can model a tire?
- Is a tire model accurate enough to check wheel fitment?
- Can I 3D print a working tire from the model?
You build a tire CAD model by sketching its cross-section from the size code and revolving it. The section width, aspect ratio and rim diameter give every dimension the sketch needs. A parametric setup lets one model cover many tire sizes by changing three values.
- Sidewall height equals section width multiplied by the aspect ratio divided by 100.
- Overall diameter equals rim diameter in millimeters plus two sidewall heights.
- Draw the cross-section profile on one side of the axis, then revolve it 360 degrees.
- Drive the sketch with named parameters so a new size updates the whole model.
- A geometric model shows shape and fit, not the load or grip behavior of a real tire.
What a tire CAD model actually represents
A tire CAD model is a digital solid that reproduces the outer shape of a tire. Designers use one to check wheel fitment, fender clearance and the look of a vehicle concept. Hobbyists use the same geometry for scale models, prototypes and 3D printed parts.
CAD tire modeling for fitment work produces a geometric tire model, not a structural simulation. A geometric model holds dimensions and shape but no rubber properties, ply layers or air pressure. Engineers who study grip, load or deflection use finite element analysis, a separate simulation method. That kind of model requires material data held by tire manufacturers.
A tire geometry model starts from the size code molded into the sidewall. Three numbers in that code define the width, the sidewall height and the wheel it mounts on. Every other dimension of a basic car tire model follows from those three values.
Reading tire dimensions from the sidewall code
The tire size code, such as 205/55R16, holds every input a basic tire model needs. The first number is the section width in millimeters, the widest point between the sidewalls. The second number is the aspect ratio, the sidewall height as a percentage of section width. The number after the R is the rim diameter in inches.
Section width excludes raised lettering, rim protectors and decorative ribs on the sidewall. The letter R stands for radial construction and adds no dimension to the model. Prefixes such as P or LT mark the tire type rather than its shape. Load index and speed rating at the end of the code also have no effect on geometry.
A tire 3D model from measurements follows the same logic when the sidewall code is unreadable. Measure the overall diameter across the tread and the section width at the widest sidewall point. Measure a mounted tire, since the rim width changes how far the sidewalls bulge. Real dimensions differ slightly from calculated ones, depending on the manufacturer, tread wear and inflation pressure.
Calculating sidewall height and overall diameter
Sidewall height equals the section width multiplied by the aspect ratio, then divided by 100. For a 205/55R16 tire, 205 times 0.55 gives a sidewall height of 112.75 millimeters. That height runs from the bead seat, where the tire meets the rim, to the tread surface.
Overall diameter equals the rim diameter converted to millimeters plus two sidewall heights. One inch equals 25.4 millimeters, so a 16-inch rim measures 406.4 millimeters across. Adding 225.5 millimeters of sidewall gives the 205/55R16 tire an overall diameter of about 631.9 millimeters.
A spreadsheet with these two formulas keeps the inputs and results in one place before modeling. Work in millimeters from the start, because mixing inches and millimeters causes scaling errors later. Calculated values for several sizes, using the same method, appear in the table below.
| Size | Section width (mm) | Sidewall height (mm) | Rim diameter (mm) | Overall diameter (mm) |
|---|---|---|---|---|
| 205/55R16 | 205 | 112.8 | 406.4 | 631.9 |
| 225/45R17 | 225 | 101.3 | 431.8 | 634.3 |
| 195/65R15 | 195 | 126.8 | 381.0 | 634.5 |
| 265/70R17 | 265 | 185.5 | 431.8 | 802.8 |
Sketching the tire cross-section profile
The tire cross-section profile is a 2D sketch of the tire wall cut through its axis. Draw it on a plane that contains the rotation axis, with the wheel center at the origin. Only the section on one side of the axis is needed, since the revolve creates the full ring.
Start the profile with a rectangle as wide as the section width and as tall as the sidewall. Place the inner edge at the rim radius, which is half the rim diameter. Set the outer edge at the tire radius, half the overall diameter. Round the outer corners with arcs to form the shoulders, then curve the sidewalls outward slightly.
Shoulder radius, sidewall bulge and tread crown are not part of the size code. Estimate them from photos or measurements, or keep them simple when only fit matters. A narrow notch at the bead area can mark where the rim flange sits for later wheel models.
Revolving the sketch into a 3D tire
A revolve sketch operation spins the closed cross-section profile 360 degrees around the wheel axis. The result is a solid ring with the correct overall diameter, section width and rim opening. Solid modeling programs offer the revolve feature, sometimes under a name such as revolution or lathe.
The profile must be a closed loop with no gaps or overlapping lines, or the revolve fails. The axis must not cross the profile, or the software produces a self-intersecting solid. The distance between the axis and the inner edge equals the rim radius, which forms the wheel opening.
Tread grooves and sidewall lettering come after the base solid is complete. Cut circumferential grooves with a second revolve, then add lateral grooves as a patterned cut around the axis. Detailed tread patterns add file size and printing time, so match the detail to the purpose.
- Create a sketch on a plane that contains the wheel axis
- Draw a construction line as the axis of rotation
- Sketch the closed cross-section profile from the calculated dimensions
- Fully constrain the sketch with dimensions and relations
- Apply the revolve feature at 360 degrees around the axis
- Add grooves, lettering and fillets as separate features
Making a parametric tire model with constraints
A parametric tire model links every sketch dimension to three named inputs: width, aspect ratio and rim diameter. Define those values in a parameter table or global variables panel inside the CAD program. Then write sidewall height and overall diameter as equations that reference the inputs.
CAD dimension constraints fix the size of each line, while geometric relations fix how lines connect. A fully constrained sketch shows no free entities, so it updates predictably when an input changes. Under-constrained sketches can distort or flip when the model rebuilds with a new size.
Changing 205/55R16 to 225/45R17 in a parametric model regenerates the whole tire in one step. Ratio-based dimensions for shoulder radius and groove depth help the details scale sensibly with size. Configurations or design tables can store several sizes inside one part file.
Producing a tire CAD drawing and file formats
A tire CAD drawing is a 2D sheet made from the 3D model, with views and dimensions. A half-section view through the axis shows the cross-section profile and the rim seat clearly. Dimension the overall diameter, section width, rim diameter and sidewall height for anyone checking fitment.
The tire CAD file format depends on where the model goes next. Native formats keep the feature history and parameters, which matters for later size changes. STEP, a neutral exchange format, carries exact solid geometry between different CAD programs without the history.
STL, a mesh format made of triangles, serves 3D printing and many visualization tools. OBJ files suit rendering, since they can carry texture coordinates for tread images. Mesh files lose the parametric setup, so keep the native file as the master copy.
Preparing an STL export for 3D printing
An STL export of a tire model needs a fine mesh on its curved surfaces. Set a small chordal deviation, the gap between mesh and true surface, to hide flat facets. A tighter tolerance raises file size, which matters for detailed tread patterns.
Scale the model before export when printing a miniature car tire for a model or display. Divide every input by the scale factor in the parameter table, then rebuild instead of scaling the mesh. Thin sidewalls and shallow grooves may fall below the printer's minimum feature size at small scales.
3D printed tires suit prototypes, fitment mockups, scale models and robotics, not road vehicles. Flexible filaments such as TPU, thermoplastic polyurethane, can give small tires some grip and compliance. A printed tire cannot replace a road-rated tire on any car, motorcycle or trailer. Wheel and tire mounting on real vehicles is a job for a trained tire technician.
Questions about tire CAD models
How do I make a tire model from the size code?
You make the model by calculating sidewall height and overall diameter from the size code. Sketch the cross-section profile with those values, then revolve it around the wheel axis. Width, aspect ratio and rim diameter are the only inputs a basic tire model needs.
Can I download a tire file instead of modeling one?
Yes, online model libraries share tire files, but their dimensions are not always accurate. Check the overall diameter and section width against values calculated from the size code. Read the license terms before using a downloaded tire model in commercial work.
What is the difference between a geometric and a simulation tire model?
A geometric tire model captures shape and dimensions only. A simulation model for finite element analysis adds rubber properties, internal plies and inflation pressure. Building that kind of model needs material data that tire manufacturers hold internally.
Which CAD software can model a tire?
Any program with sketching and a revolve feature can model the basic shape of a tire. Parametric solid modelers make size changes easier through equations and design tables. Mesh-based modeling tools can also produce a tire, though exact dimensions are harder to control.
Is a tire model accurate enough to check wheel fitment?
A calculated tire model is accurate enough for a first clearance check, not a final one. Real tires vary from nominal size by manufacturer, rim width, wear and pressure. Final fitment on a vehicle should be confirmed by a tire professional with the actual tire mounted.
Can I 3D print a working tire from the model?
Yes, a 3D printed tire can work on scale models, robots or remote-control vehicles. Print it in a flexible filament and keep thin walls above the printer's minimum feature size. A printed tire is not suitable for cars, motorcycles or any other road vehicle.