# Summer Tire Symbols Explained

Learn what the symbols on a summer tire sidewall mean, from the size code and load index to the speed rating letter, UTQG grades and DOT marking.

Summer [tire symbols explained](/articles/tire-sidewall-symbols-dates-approval-markings-material-44526/) on a sidewall tell you the tire's size, load capacity, speed capability and government-required grades. Each marking is a code rather than a word, so the same letters and numbers appear on many tires in different sizes. Reading them in order lets you match a tire to your vehicle and see how one tire differs from another. 

## Decoding the tire size code 

The [tire size code](/articles/tire-size-markings-width-aspect-ratio-construction-rim-size-material-44540/) combines width, aspect ratio and rim diameter in one string of numbers. A size such as 225/45R17 means a 225 millimeter section width and an aspect ratio of 45 percent of that width. The R marks radial construction, and the final number is the wheel diameter in inches. [Width and aspect ratio](/articles/comparing-tire-width-and-aspect-ratio/) together set the sidewall height and the overall diameter of the tire. 

## Load index and speed rating letter 

The sidewall load index is a number that maps to the maximum load a tire can carry at its rated pressure. A higher load index number corresponds to a higher load capacity on that scale. The speed rating letter that follows shows the top speed the tire is approved to sustain under load. Both values must meet or exceed what the vehicle manufacturer specifies for the fitment. 

## UTQG grades and DOT marking 

The UTQG treadwear number compares wear rate against a reference tire used in the government test, so a higher number indicates slower wear. Traction and temperature grades rate wet braking and heat resistance on letter scales. The DOT approval marking confirms the tire meets the applicable safety standard and carries a date code for when it was made. These markings help you compare tires of the same size on stated criteria. 

## Questions About Summer Tire Markings 

### What do the letters and numbers on a summer tire sidewall mean? 

Each group of letters and numbers on a summer tire sidewall describes one property of the tire. The size code gives width, aspect ratio and wheel diameter, while the [load index and speed rating](/articles/tire-load-index-load-range-speed-ratings-material-44528/) letter state capacity and speed capability. Grades and the DOT marking cover wear, traction, heat and conformity to the safety standard. 

### What is the speed rating letter on a tire? 

The speed rating letter is a code for the maximum speed a tire is approved to sustain while carrying its rated load. It appears as a single letter after the load index in the size string. A tire should never be fitted with a speed rating below what the vehicle manufacturer specifies. 

### How do I read UTQG treadwear, traction and temperature grades? 

The UTQG treadwear figure is a relative number from a standardized wear test, and a larger number means slower wear in that test. Traction and temperature appear as letters that rate wet stopping and heat resistance. These grades let you compare tires within the same category rather than predict real-world tire life. 

### What does the DOT approval marking tell me about a tire? 

The DOT approval marking shows the tire conforms to the applicable federal safety standard for its type. It also includes a date code that identifies the week and year of manufacture. The marking does not rate performance, so use the load index, speed rating and UTQG grades for that.
