# Stroller Tube Size: Finding the Right Inner Tube

Learn how to read stroller tire markings and match an inner tube by diameter, width and valve type so the replacement fits the wheel correctly.

Stroller tube size comes from the markings on the tire sidewall, not from the size of the stroller itself. You read the [tire diameter and width](/articles/tire-dimension-comparison-from-sidewall-markings/), then choose an inner tube whose size range covers both figures and whose valve matches the rim. Checking the old tube and the wheel before buying confirms the match and avoids a tube that is too large or too small. 

## Read the tire sidewall first 

The tire sidewall carries the numbers that define the stroller tube size you need. A marking such as 12 1/2 x 2 1/4 gives a nominal diameter and a width that the inner tube must cover. Tire and tube matching starts with these figures because the tube is sized to sit inside that specific tire cavity. Write the numbers down before you search for a replacement inner tube. 

## Match tube diameter to the wheel 

Tube diameter must correspond to the bead seat diameter of the stroller wheel, which the tire marking approximates. A tube listed for a slightly wider range can still fit, but a tube for a different diameter will not seat correctly. Measure the wheel across its rim if the sidewall is worn and the numbers are unreadable. A trained technician can confirm the diameter when the marking is missing. 

## Check the valve type and rim hole 

The tube valve type must pass through the hole in the rim and leave room to inflate the tube. Schrader and Presta valves need different rim openings, and a stroller rim is drilled for one of them. Look at the old tube or the rim hole before ordering, since a valve that does not fit makes the tube unusable. The valve length also matters when the rim is deep. 

## Stroller Inner Tube Questions 

### How do I find my stroller tube size? 

Stroller tube size is found on the tire sidewall, where the diameter and width are printed. Read those numbers and pick an inner tube whose stated range includes both of them. If the marking is gone, measure the rim diameter and the tire width instead. 

### Can I use a tube that is slightly bigger than the tire? 

A slightly larger tube can work when its size range covers the tire diameter and width, because the tube expands to fill the tire. A tube far outside that range bunches or stretches unevenly inside the tire. Match the range on the tube label to the sidewall figures rather than guessing. 

### Does the valve type matter when replacing a stroller inner tube? 

The valve type matters because the rim hole is sized for either a Schrader or a Presta valve. A valve that does not match the hole will not seat or hold air properly. Check the old tube or the rim opening and buy the same valve type. 

### What if my stroller tire has no size marking? 

A stroller tire without a readable marking needs a physical measurement of the rim diameter and tire width. Compare those measurements with the size ranges printed on replacement tubes. Ask a tire technician to confirm the figures before you buy, since an incorrect tube can damage the tire or rim.
