# Storing Tires After a Tire Size Change

How to store the tires or wheels you took off after a size change: location, stacking or hanging, covers, sidewall markings, and what tire age means for storage.

Storing tires after a tire size change means putting the set you removed into conditions that protect the rubber and the wheels until you use them again. The job is mostly about location, position and protection: a dry, dark, clean spot, a sensible stacking or hanging method, and a cover that keeps dirt and sunlight off the sidewall. The markings molded into the sidewall stay readable during storage, so you can identify each tire later. 

## Choosing a storage location 

Tire storage location decides how much heat, sunlight and moisture the rubber meets while it waits. A dry, dark space with steady cool temperatures and good air movement suits a stored set. Keep tires away from electric motors, transformers and other sources of ozone, which attacks rubber. Floors that stay damp, such as bare concrete in a humid room, are a poor choice because moisture works into the casing. 

## Stacking, standing or hanging tires 

Stacking or hanging tires depends on whether they still sit on wheels. Tires mounted on wheels can lie flat in a stack or hang from a rack, and a stack should stay low so the weight does not distort the lower tires. Tires without wheels stand upright and are rotated a little at intervals to relieve a flat spot. Hanging a tire by a single point loads the bead area, so a rack or bar that spreads the load is the safer method. 

## Covers, markings and tire age 

A tire cover and protection from sunlight slow the weathering of the sidewall during long storage. Sidewall markings during storage remain the record of size, load index, speed rating and the date code, so note them before the set goes into a dark corner. Tire age and storage are linked because rubber changes with time even when a tire is not used. A tire kept in poor conditions ages faster than one kept cool, dry and dark. 

## Questions about storing tires after a size change 

### Can I keep the old tires after a size change? 

Yes, keeping old tires after a size change is fine when they are sound and stored properly. Check each tire for cuts, bulges and tread wear before storage. Record the sidewall markings so you can match the set to the vehicle later. A damaged tire should be scrapped rather than stored. 

### Should I store tires stacked or hanging? 

Either stacking or hanging works when the method suits the tire and the space. Tires on wheels stack flat or hang on a rack without much risk of distortion. Tires off wheels stand upright and get rotated to avoid flat spots. Hanging a bare tire from one hook concentrates stress, so use a rack that supports it broadly. 

### Does tire age matter when tires are in storage? 

Yes, tire age matters in storage because rubber keeps changing with time, heat and light. The date code molded into the sidewall tells you when the tire was made. Cool, dark, dry storage slows the change but does not stop it. Have a trained tire specialist inspect an old stored tire before you fit it. 

### Do I need to cover tires in storage? 

Yes, a cover helps because it blocks sunlight, dust and dirt from the rubber and the wheel finish. An opaque cover that fits loosely allows air to move around the tire. Storing tires in direct sun without protection exposes the sidewall to weathering. Keep the cover off damp ground so moisture does not collect underneath.
