# Storing a Spare Tire on a Roof Rack

How to carry a spare on a roof rack: weight limits, mounting and securing it, wind noise, cargo box options, and reading the tire sidewall first.

Storing a spare tire on a roof rack means fixing it to a rated crossbar or basket so it cannot shift while the vehicle moves. The job succeeds when the rack, the tray and the fasteners all carry the tire's weight, and when the tire is checked before every trip. A heavy spare changes how the vehicle handles, so the mounting hardware matters as much as the tire itself. 

- Match the combined weight of tire and wheel against the roof load rating of the vehicle.
- Lay a spare flat on a basket or upright in a carrier, then hold it with two separate restraints.
- Read the sidewall size and load markings before mounting so you know the weight and diameter you are fixing.
- Check straps and bolts after the first stretch of driving and at each stop.
- Wind noise rises with a tall tire, so keep the load low and behind the front edge of the roof.
 

## Reading the sidewall before you mount 

A spare tire carries markings on its sidewall that tell you its size and its load capacity. The width, the aspect ratio and the rim diameter describe the tire, and a load index follows the size in a service description. Reading these numbers first tells you whether the spare matches the wheels on the vehicle. 

Tire weight limits also shape the roof plan, because a large off-road tire with a steel wheel weighs much more than a compact space saver. The sidewall load index refers to the weight the tire can carry, not the weight of the tire itself. Weigh the assembled tire and wheel, or look up the two parts, before you trust a rack. 

Off-season tires kept on the roof for months deserve the same check as a temporary spare. A tire stored under load in one position can develop a flat spot, and sunlight ages rubber over time. Move the spare indoors for long storage and keep the roof rack for trips. 

## Roof rack load rating and tire weight limits 

Every roof rack has a load limit set by the vehicle maker and the rack maker, and the lower of the two applies. That figure covers the crossbars, the tray and the tire, so subtract the hardware weight first. A spare that pushes past the rating loads the roof panel and the mounting feet beyond design. 

Tire weight limits on the sidewall describe the tire's carrying capacity, which is a different number from the roof load rating. A spare rated for a heavy load can still be too heavy for the roof. Keep the two figures separate and compare the actual weight of the assembly with the rack limit. 

A rack that sits close to its limit leaves no room for a cargo box, a second tire or luggage. Distribute weight across the bars and keep it centered between the mounting feet. If the spare alone comes near the limit, a rear carrier or the vehicle floor is the safer place for it. 
| Load factor | What it limits | Where to find it | 
| Roof load rating | Total weight on bars and feet | Vehicle and rack documentation | 
| Tire load index | Weight the tire can carry | Sidewall service description | 
| Assembly weight | What the rack must hold | Tire plus wheel weighed together | 
| Bar spread | Support under a flat tire | Distance between crossbars |  

## Flat mounting in a basket or on bars 

Laying a spare flat on a roof basket spreads its weight over the bars and keeps the profile low. The tire rests on its tread, so the sidewall carries no point load from a strap. A flat spare also stays clear of the windshield and adds less wind noise than an upright one. 

Tire mounting on bare crossbars needs a tray, a basket floor or wide bar pads to spread the load. Two crossbars set far apart support a flat tire better than two bars close together. Place the tire so its center sits between the bars, not over one bar. 

A ratchet strap around the tread holds a flat tire down, and a second strap through the wheel center adds a backup. Route straps so they clear the valve stem and the sidewall lettering. Check the tire with a firm push from each side before you drive. 

## Upright mounting in a spare tire carrier 

An upright spare tire carrier bolts to the crossbars and holds the wheel by its center or by a cradle. The upright position saves floor space on the roof and leaves the basket free for other gear. A carrier built for the wheel bolt pattern holds the tire more firmly than a universal strap alone. 

Securing a spare upright demands a restraint that resists forward and backward force, not just downward force. A wheel stud and nut set through the center, plus a strap around the tread, covers both directions. The carrier base must sit flat on the bars so the load passes into the rack. 

An upright tire stands above the roof line and catches air, and wind noise grows with height. Keep the spare behind the front crossbar where airflow is smoother. Tilt the tire slightly back where the carrier allows it, so the tread deflects air rather than scooping it. 

## Straps, bolts and a second restraint 

Two independent restraints keep a roof spare in place if one loosens on a rough road. A primary strap or bolted plate holds the tire, and a secondary strap around the tread catches any movement. One strap alone is a single point of failure for a heavy object above the cabin. 

Straps rub against tread edges and bar corners, so inspect them for fraying at each stop. A strap that has lost its edge or its buckle grip should come off the vehicle. Bolted mounts need a check of nut tightness after the first stretch of driving. 

A spare that shifts can damage the roof panel, the rack feet or the rear window. Stop and re-secure the load as soon as you hear a knock or feel a vibration. Never let a passenger hold a tire on an open roof while the vehicle moves. 

## Cargo box and wind noise trade-offs 

A cargo box encloses gear and sheds rain, but a spare tire rarely fits inside one with other luggage. Roof boxes suit soft bags and tools more than a heavy wheel. A spare on open bars or in a basket takes less box space and leaves the box free for light items. 

Wind noise comes from the gap under the tire, the strap ends and the tread pattern facing the airflow. A flat tire with the tread down and the sidewall facing up creates less turbulence than an upright one. Trim strap tails and tuck buckles so nothing flaps. 

A fairing at the front of the rack smooths airflow over the tire and reduces noise at speed. Keep the spare low and close to the bars rather than raised on a tall mount. Remove the spare and the carrier when the trip ends. 

## Checks before each trip with a roof spare 

A roof spare needs a walk-around check before every trip, starting with the straps and the mounting bolts. Push the tire from the front, the back and both sides to feel for movement. Look at the rack feet for cracks or loosened clamps. 

Tire pressure belongs on the checklist, because a soft spare sits loose in its straps and a hard one strains them. Set the pressure to the figure the vehicle maker lists for the spare. Check the sidewall for cuts, bulges or embedded objects before the tire goes up. 

Driving with a spare overhead changes braking, cornering and fuel use, so slow down and leave more room. Enter parking structures with the new height in mind, since a roof spare raises the vehicle's clearance. A trained technician should fit any mount that needs drilling or new roof hardware. 

## Questions about roof rack spare tires 

### Can I store a spare tire on a roof rack? 

Yes, a spare tire can go on a roof rack when the rack, the tray and the fasteners are rated for its weight. The combined weight of tire and wheel must stay under the roof load limit. Two separate restraints and a check before each trip make the arrangement sound. 

### How much does a spare tire weigh on a roof rack? 

A spare tire's weight depends on its size and on the wheel it sits on, so weigh the assembly rather than guessing. A large off-road tire on a steel wheel is far heavier than a compact space saver. Compare that figure with the roof load rating before mounting. 

### Should a roof spare lie flat or stand upright? 

A flat spare on a basket or wide bars keeps the profile low and reduces wind noise. An upright carrier saves roof space and suits a basket shared with other gear. The upright position stands taller and catches more air, so keep it behind the front crossbar. 

### Does a roof rack spare tire make wind noise? 

Yes, a spare on the roof adds wind noise, and a tall upright tire adds more than a flat one. The gap under the tire and flapping strap ends create the sound. A front fairing, trimmed straps and a low mount reduce the noise. 

### How do I secure a spare tire on roof bars? 

Secure a spare with a primary strap or bolted plate through the wheel and a second strap around the tread. Route the straps clear of the valve stem and sidewall lettering. Check both restraints after the first stretch of driving and at each stop. 

### Which sidewall markings matter for a roof spare? 

The size numbers and the load index on the sidewall matter most for a roof spare. Size tells you the diameter and width you must fit on the bars, and the load index tells you what the tire can carry. Read both before you buy a carrier or tray.
