Space-Saver Spare Tire Kit: Contents and Use

What a space saver spare tire kit holds, how the jack and lug wrench work together, and the limits that make a compact spare a short-trip fix.

8 min read1 viewsSpace-Saver Spare Tire Kit: Contents and Use
— · 0 votes
Contents
  1. What the kit contains
  2. How a space-saver spare wheel differs
  3. Checking the kit before you need it
  4. Steps to fit the spare safely
  5. Driving on a compact spare
  6. Limits and risks to respect
  7. Buying a replacement kit or part
  8. Questions about space-saver spare tire kits
  9. What is in a space saver spare tire kit?
  10. Can I drive normally on a space-saver spare?
  11. How fast can you go on a compact spare?
  12. Do I need a special jack for a space saver spare?
  13. Where should I store the emergency spare tire kit?
  14. Is a space-saver spare safe on a long trip?

A space saver spare tire kit is a packed set that lets you swap a flat wheel for a narrow temporary wheel at the roadside. The kit pairs a space-saver spare wheel with the tools needed to lift the car and free the wheel, so you can drive to a repair shop instead of waiting on a tow.

  • A space saver spare tire kit pairs a narrow temporary wheel with a jack, a lug wrench and often a few small extras.
  • The compact spare runs at a reduced speed and pressure set by the vehicle maker, not by the tire itself.
  • The jack lifts the car only at the reinforced points named in the owner's manual.
  • Check the spare's air pressure and tool condition before a trip, not after a flat.
  • A space-saver wheel is a get-you-there device, so plan a repair or full-size replacement soon after fitting it.

What the kit contains

A space saver spare tire kit is a matched set of parts stored in the car for one job: replacing a flat wheel. The central item is the space-saver spare wheel, a narrow wheel built to fit the hub and clear the brakes. Around it sit the tools that make the swap possible away from a workshop.

The jack and lug wrench form the core of the tool set. The jack raises the corner of the car, and the lug wrench loosens and tightens the wheel nuts. Many kits add a wheel chock, a retention strap or bolt that holds the spare in its well, and a small bag or tray to keep the parts quiet.

Kit components differ between vehicles, so read the contents list in the owner's manual rather than assuming. Some kits include a funnel for tire sealant or a special socket for security nuts. Tire mounting components such as centering rings or bolts belong to the kit only when the wheel design needs them.

  • Space-saver spare wheel
  • Scissor or bottle jack
  • Lug wrench
  • Wheel chock
  • Retention bolt or strap
  • Storage bag or tray

How a space-saver spare wheel differs

A space-saver spare wheel is a narrow temporary wheel, often with a smaller diameter and a higher inflation pressure than the road wheels. The narrow tread saves trunk space and weight, which is why the wheel sits in a shallow well. Its sidewall carries a speed and distance limit set by the vehicle maker.

The temporary wheel is not a permanent replacement for a full-size tire. Grip, braking and steering response change once the narrow wheel is fitted, so the car handles differently. Drive gently and keep the space-saver on the axle position the manual names.

Markings on the space-saver sidewall follow the same pattern as any tire, with size, load and pressure figures. Read those numbers before fitting the wheel, since a temporary spare may call for a pressure well above the road tires. Confirm the figure in the manual if the sidewall is worn.

Checking the kit before you need it

A space saver spare tire kit only helps when every part works, so inspect it at home on a calm day. Spare tires lose air slowly even when unused, and a soft spare is useless at the roadside. A pressure gauge and a small pump make the check quick.

Look over the jack for bent arms, cracked pads or a stiff screw thread, and test that the lug wrench fits the wheel nuts. Confirm the retention bolt turns freely and that the spare sits firmly in its well. Worn or missing pieces should be replaced before a journey.

Store the kit exactly as the manual describes, with the tools secured so they do not rattle or shift. Loose tools can damage the wheel or the trunk floor over time. Note the spare's pressure figure somewhere handy, because the sidewall may be hard to read in the dark.

Steps to fit the spare safely

Fitting a space saver spare tire kit starts with getting the car off the traffic lane and onto firm, level ground. Switch on the hazard lights and set the parking brake. Put a wheel chock at the corner opposite the flat, then loosen the wheel nuts slightly while the tire still touches the ground.

Lift the car with the jack only at the reinforced lifting point named in the owner's manual. Raise it just enough to clear the ground, then remove the nuts and pull the wheel free. Mount the space-saver wheel, start the nuts by hand and snug them in a cross pattern.

Lower the car, then tighten the nuts firmly with the lug wrench and stow the flat wheel and tools. Never put any part of your body under a car held only by a jack. If the ground is soft, sloped or the nuts will not move, call a roadside service instead of forcing the job.

  • Stop on firm, level ground and switch on hazards
  • Set the parking brake and chock the opposite wheel
  • Loosen the wheel nuts before lifting
  • Raise the car at the manual's lifting point
  • Fit the spare and snug the nuts in a cross pattern
  • Lower the car and tighten, then stow the flat

Driving on a compact spare

A compact spare is meant for a short, gentle drive to a place that can repair or replace the flat tire. Keep the speed and distance within the limits on the wheel and in the manual. Avoid highways, heavy loads and hard braking while the temporary wheel is fitted.

Handling changes because one corner has less rubber on the road. Steering feel, cornering grip and braking balance shift, so leave extra room and steer smoothly. Check the spare's pressure after fitting if you have a gauge, since a soft spare overheats.

Return to a full set of road wheels as soon as you can. A repaired or replaced tire restores normal grip and lets the car travel at normal speeds. The space-saver then goes back into the well, cleaned and refilled to its storage pressure.

Limits and risks to respect

A space saver spare tire kit is a temporary aid, not a permanent fix, and some situations call for a trained specialist. Damage to the wheel, hub or suspension, or a flat on a busy road, is a job for roadside assistance. Do not attempt a swap on a narrow shoulder with fast traffic.

A jack is designed to lift one corner of a car, not to hold it while you work underneath. Never use the jack to raise the car for any task beyond changing a wheel. Keep hands and limbs clear of the car while it is lifted.

Some cars cannot use a space-saver wheel because of large brake calipers or a staggered wheel set, and the manual says so. Respect that limit rather than forcing a fit. Where the kit is absent or incomplete, a tire sealant or a call for help may be the safer route.

Buying a replacement kit or part

A replacement space saver spare tire kit must match the vehicle's bolt pattern, hub bore and brake clearance. The wheel size printed in the manual is the reference, not the size of the road tires. A wheel that fits the studs but rubs the brakes is unsafe.

When buying a single part, match the jack's lifting capacity and saddle shape to the car's lifting points. A lug wrench must fit the nut size and give enough leverage without slipping. Tire mounting components such as bolts or centering rings should be the type the wheel maker specifies.

Check that the spare's date code and sidewall markings are legible and that the pressure figure matches the manual. A used kit needs the same checks as a new one, with extra attention to the jack and the wheel's condition. Ask a tire technician to confirm fitment before you rely on the kit.

Kit partWhat to match
Spare wheelBolt pattern, hub bore, brake clearance
JackLifting capacity and saddle shape
Lug wrenchNut size and leverage
Retention boltThread and well depth

Questions about space-saver spare tire kits

What is in a space saver spare tire kit?

A space saver spare tire kit holds a narrow temporary wheel plus the tools to fit it, such as a jack and a lug wrench. Many kits add a wheel chock, a retention bolt or strap, and a storage bag. The exact contents are listed in the vehicle's owner's manual.

Can I drive normally on a space-saver spare?

No, a space-saver spare is a temporary wheel with reduced speed and distance limits. Drive gently, avoid highways and heavy loads, and reach a repair shop as soon as you can. The limits are printed on the wheel and in the manual.

How fast can you go on a compact spare?

The top speed for a compact spare depends on the wheel and the vehicle, and the figure is printed on the spare's sidewall or in the manual. Treat that number as a ceiling, not a target. Lower speeds reduce heat and keep the temporary wheel within its design.

Do I need a special jack for a space saver spare?

Yes, the jack must suit the car's lifting points and carry enough capacity for one corner of the vehicle. Use the jack supplied with the kit or an exact replacement. A jack that slips or sits poorly on the lifting point can let the car fall.

Where should I store the emergency spare tire kit?

Store an emergency spare tire kit in the well or bracket the manufacturer designed for it, with the tools secured. A loose jack or wrench can shift and damage the wheel or trunk floor. Keep the retention bolt tight so the spare stays in place.

Is a space-saver spare safe on a long trip?

No, a space saver is intended for a short drive to get the flat repaired. Long trips at speed build heat in the narrow temporary wheel and change how the car handles. Plan a repair or a full-size replacement before continuing a long journey.

Read next

Latest articles