# Sidewall Number Comparison Chart

Learn how to read a sidewall number comparison chart, turn sidewall numbers into actual tire dimensions, and compare sidewall height, width, and overall diameter.

A sidewall number comparison chart puts the numbers printed on a tire next to the actual dimensions they describe. The sidewall numbers give [section width and aspect ratio](/articles/comparing-tire-width-and-aspect-ratio/), and the chart converts that pairing into a sidewall height, a section width, and an overall diameter. That lets you [compare two tire sizes](/articles/tire-size-calculator-diameter-comparison-material-44527/) by geometry instead of by the label alone. 

- The first sidewall number is section width and the second is the aspect ratio, a percentage of that width.
- Sidewall height is the aspect ratio applied to the section width, so a wider tire with the same ratio has a taller sidewall.
- Overall diameter adds two sidewall heights to the rim diameter, and that figure shows how the tire sits on the vehicle.
- A comparison chart only matches measured dimensions, so check the real specs from the tire maker when an exact fit matters.
- Sidewall number changes shift speedometer reading and clearance, and a trained technician should confirm fitment.
 

## What the sidewall numbers mean 

Sidewall numbers describe a tire size in a fixed order that a comparison chart reads from left to right. The first figure is section width in millimeters, measured across the widest part of the inflated tire. The second figure is the aspect ratio, which sets the sidewall height as a percentage of that width. 

A size such as 225/45R17 breaks into three parts, and each plays a different role in dimension comparison. The 225 is the section width, the 45 is the aspect ratio, and the 17 is the rim diameter in inches. The letter R marks the radial construction and has no bearing on the height figures. 

The aspect ratio is the part readers misread, because it is not a measurement in millimeters. A 45 aspect ratio means the sidewall is 45 percent of the section width, not 45 millimeters. A sidewall number comparison chart exists to translate that ratio into a real height you can hold next to another size. 

## Turn numbers into sidewall height 

Sidewall height converts the aspect ratio into a length, and that length is the value a sidewall height comparison depends on. Multiply the section width by the aspect ratio and divide by 100 to get the sidewall height in millimeters. A 225/45 tire has a sidewall of about 101 millimeters, because 225 times 45 divided by 100 gives that figure. 

Two tires with the same aspect ratio do not share a sidewall height when their widths differ. A 245/45 tire carries a taller sidewall than a 225/45 tire, since the ratio applies to the larger width. Comparing sidewall numbers side by side therefore needs the width and the ratio read together, never the ratio alone. 

The reverse also holds, and a lower aspect ratio on a wider tire can land near the same sidewall height. A 245/40 and a 225/45 arrive at similar sidewall figures through different numbers. A comparison chart shows that effect at a glance, which is why the ratio cannot be read without the width. 

## Compare overall diameter and width 

Measured overall diameter combines the sidewall height with the rim diameter, and it sets how the tire sits in the wheel well. Add twice the sidewall height to the rim diameter, converting units so both figures match. The result shows whether a new size stands taller or shorter than the one it replaces. 

Measured section width does not always match the nominal number on the sidewall, because rim width and tire construction shift it. A comparison chart uses nominal figures as a reference, and the [actual tire dimensions](/articles/actual-tire-dimensions-by-size-nominal-sizes-vs-manufacturer-specifications/) come from the tire maker. Keep that gap in mind when a size sits close to a clearance limit. 

Rim diameter changes the overall diameter directly, and one inch of rim adds a fixed amount to the total. Moving up a rim size while keeping overall diameter calls for a lower aspect ratio. That trade keeps the tire height steady and leaves less sidewall to absorb road input. 
| Size | Section width | Aspect ratio | Sidewall height | Overall diameter | 
| 205/55R16 | 205 mm | 55 | about 113 mm | about 632 mm | 
| 225/45R17 | 225 mm | 45 | about 101 mm | about 634 mm | 
| 245/40R18 | 245 mm | 40 | about 98 mm | about 653 mm | 
| 215/60R16 | 215 mm | 60 | about 129 mm | about 664 mm |  

## Read a sidewall number chart correctly 

A [tire sidewall markings](/articles/tire-sidewall-symbols-dates-approval-markings-material-44526/) comparison chart pairs each size with its calculated dimensions, and reading it well means checking the column order first. Some charts list sidewall height, others list overall diameter, and a few list both. Confirm which column holds which figure before you draw a conclusion from two rows. 

Rounded figures in a [sidewall size comparison](/articles/reading-and-comparing-tire-sidewall-size-markings/) table are convenient but can hide a small difference between close sizes. Two rows may show the same diameter after rounding while the exact numbers differ by millimeters. Use the chart for direction and the exact size reference for the final check. 

The shortcut in a sidewall number comparison is to hold the ratio steady and watch the width. Reading across a row set of the same aspect ratio shows how sidewall height grows with width. Reading down a column of the same width shows how the ratio changes the height. 

## Compare sidewall numbers against actual tires 

Comparing sidewall numbers to actual tires starts with the maker's published dimensions for each model. Nominal size numbers are a starting reference, and real section width and diameter vary by model and rim width. The chart gives the geometry, and the specification sheet gives the measured result. 

Mounted tires change shape under load, so a measured overall diameter is not the same as the free, inflated figure. Tire dimension figures in a size reference are taken in set conditions, and the tire on the car sits slightly different. Treat small differences as normal and large gaps as a reason to check fitment. 

Fitment questions belong with a trained technician who can measure the wheel well and the suspension clearance. A chart cannot see a brake caliper or a strut, and those parts decide whether a size fits. Use the numbers to narrow the choice and let a professional confirm it. 

## What a size change does to the car 

A tire size comparison chart shows geometry, and that geometry feeds into the speedometer, the gearing, and the clearance around the tire. A taller overall diameter turns fewer times over the same distance, which reads as a lower speed on the gauge. A shorter diameter turns more often and reads higher. 

Wider section width moves the tire outward and can bring the sidewall closer to suspension parts and the fender edge. A taller sidewall softens the ride and adds flex, while a shorter one sharpens steering response. [Tire size equivalents](/articles/tire-size-equivalents-finding-equivalent-tire-sizes/) that keep the overall diameter close preserve the speedometer reading best. 

Tire size conversion between inch and metric markings needs the same three figures kept straight. A flotation size states diameter and width in inches, while a metric size states width, ratio, and rim. A marking comparison chart lines the two systems up so the dimensions can be compared directly. 

## Use the chart as a shortcut 

A [sidewall number shortcut](/articles/tire-marking-fast-lookup/) comparison saves arithmetic when two sizes sit close together. The chart turns the ratio into a height for each width so you can see the change without recalculating. Keep the shortcut inside its limits and verify any figure that decides a purchase. 

Start with the section width, find the aspect ratio, and read the sidewall height and diameter for that row. Repeat for the second size and compare the two rows column by column. That path answers a sidewall number dimension comparison without converting every number by hand. 

Different tire makers publish slightly different measured dimensions for the same nominal size. A chart built from calculated figures stays consistent, while a chart built from measured data needs a source note. Check what the chart measures before you trust a close call between two rows. 

- Write down both full sizes in the same order as the chart columns.
- Find each size row and note the sidewall height and overall diameter.
- Compare diameter first when the speedometer reading matters.
- Compare width next when clearance around the tire is tight.
- Confirm the final numbers on the tire maker's specification sheet.
 

## Sidewall number comparison questions 

### What does a sidewall number comparison chart show? 

A sidewall number comparison chart shows the dimensions that a tire size number implies. It turns the section width and aspect ratio into a sidewall height and an overall diameter, so two sizes can be compared by geometry. The chart does not replace the tire maker's measured specifications. 

### How do I compare sidewall numbers to actual tire dimensions? 

Comparing sidewall numbers to actual tire dimensions means converting the aspect ratio into a sidewall height first. Multiply the section width by the aspect ratio and divide by 100, then compare that figure with the maker's published dimensions for the model. Nominal numbers are a reference, and measured figures come from the tire specification. 

### Does a higher sidewall number mean a taller sidewall? 

A higher aspect ratio number means a taller sidewall only when the section width stays the same. The ratio is a percentage of the width, so a wider tire at the same ratio gains sidewall height. Compare the width and the ratio together before you read a height difference. 

### What is a sidewall number shortcut comparison? 

A sidewall number shortcut comparison is a chart that lists sidewall heights and diameters for many sizes at once. It lets you read two sizes side by side instead of calculating each one by hand. Check the chart's source figures before you rely on a small difference. 

### Can I change tire size and keep the same overall diameter? 

Yes, you can keep a similar overall diameter by pairing a larger rim with a lower aspect ratio. A taller rim adds height, and a lower ratio reduces sidewall height to offset it. A trained technician should confirm the fit and the clearance before the change. 

### Why do a chart's numbers differ from the tire on my car? 

Chart figures differ from the tire on your car because tire construction, rim width, and load change the measured dimensions. The chart uses calculated or reference figures, while the mounted tire sits under weight. Small differences are expected, and large ones call for a professional check.
