# Scale Model Car Tires by Scale: 1:8, 1:12, 1:16, 1:18, 1:24 and 1:25

How scale model car tires are sized at 1:8, 1:12, 1:16, 1:18, 1:24 and 1:25. Convert full-size tire diameter, width and sidewall into the scale you build.

Scale model car tires by scale follow one simple rule: a real tire dimension divided by the scale number gives the miniature size. A 1:18 tire is one eighteenth of the full-size diameter and width, while a 1:24 or 1:25 tire is roughly a twenty-fourth part. The lists below explain each scale, how to convert a tire size, and where the sidewall and width cause trouble on a build. 

## Dividing full-size numbers by scale 

Scale model tire diameter comes from dividing the real tire diameter by the scale number. A full-size tire of about 25 inches becomes roughly 3.1 inches at 1:8 and close to 1 inch at 1:24. The same division applies to tread width, so a real 9-inch width becomes a narrow strip in the smaller scales. Measure the model wheel arch before you trust a single number. 

## Why 1:24 and 1:25 differ 

A 1:24 tire and a 1:25 tire are close but not identical, because the two scales split the same real dimension differently. A real 25-inch diameter gives about 1.04 inches at 1:24 and about 1 inch at 1:25. Mixing parts from the two scales leaves a small gap at the axle or arch. Treat 1:25 as its own scale when you match tires to a body. 

## Sidewall and width in miniature 

Tire sidewall in miniature holds the shape of the tire even when the diameter is small, so the sidewall height must shrink with the scale. A tall sidewall on a real car becomes a thin ring at 1:16 or 1:18, and a short sidewall almost disappears at 1:24. Tire width in scale decides whether the tire sits inside the arch or rubs the body. Check both measures together rather than the diameter alone. 

## Scale model car tire questions 

### What are 1 12 scale model car tires? 

A 1:12 tire is one twelfth the size of the full-size tire it copies. A real 24-inch diameter becomes about 2 inches at 1:12, and the tread width shrinks by the same twelfth. The larger scale leaves room for a detailed sidewall and tread pattern. 

### How do 1 16 scale model car tires compare with 1 18? 

A 1:16 tire is larger than a 1:18 tire that copies the same real car. A full-size 26-inch diameter gives about 1.6 inches at 1:16 and about 1.4 inches at 1:18. The width divides in the same way, so the 1:16 tire also stands wider. 

### How do I find the 1 18 or 1 24 tire size I need? 

A 1:18 or 1:24 tire size comes from dividing the real [tire diameter and width](/articles/tire-dimension-comparison-from-sidewall-markings/) by that scale number. Note the full-size tire dimension from the vehicle you are modeling, then divide it by 18 or 24. Compare the result with the wheel arch and rim on the kit before fitting. 

### Does a 1 25 tire fit where a 1 24 tire was made? 

A 1:25 tire sits slightly smaller than a 1:24 tire for the same real dimension. A 25-inch real diameter is about 1 inch at 1:25 and about 1.04 inches at 1:24. Use a 1:25 tire on a 1:25 body to keep the arch and axle spacing consistent.
