# Run-Flat Tire Markings: Symbols and Identification

Learn to read run-flat tire markings on the sidewall, including RFT, RSC, ZP, DSST and EMT codes, symbols, and the speed rating that follows them.

Run-flat tire markings are the letters and symbols molded into the sidewall that tell you a tire can keep rolling after a loss of air pressure. The main codes are RFT, RSC, ZP, DSST, EMT and similar brand designations, and each sits next to the size and speed rating. Reading them correctly tells you the tire's type and how to match it. 

- The run-flat identifier sits in the sidewall lettering, separate from the tire size numbers.
- RFT and RSC are the general labels, while ZP, DSST and EMT are brand-specific designations.
- A run-flat tire still carries a normal speed symbol, such as V or W, on the sidewall.
- Look for the words extended mobility as an alternative clue that the tire is a run-flat.
- Never mix a run-flat tire with a standard tire on the same axle.
 

## What run-flat tire identification looks like 

Run-flat tire identification begins with the sidewall lettering, which is a band of codes molded into the rubber. A run-flat designation appears among those codes as an extra short code or phrase, apart from the size and load figures. The identifier is often small, so clean the sidewall and read it in good light. 

A run-flat sidewall designation is not a universal single mark, because each manufacturer prints its own version. Some tires carry a plain acronym, while others add a small graphic such as a wheel symbol. Reading the whole sidewall band is the reliable method for run flat tire identification. 

The position of the marking varies between molds and brands, so there is no fixed spot on the circle. Tires also show the size, load index, speed symbol and manufacturing codes in the same band. A run-flat code sits alongside them rather than replacing any of them. 

## The main run-flat acronyms explained 

RFT and RSC are the broad run-flat markings meaning Run-Flat Tire and Run-On-Flat, and both describe a tire built to stay upright with low or no air. These codes serve the same purpose across different makers. Seeing either one means the tire is a run-flat and needs matching on the axle. 

ZP, DSST and EMT are manufacturer designations that stand for Zero Pressure, Dunlop Self-Supporting Technology and Extended Mobility Technology. A ZP and RSC marking pair can appear together on tires sold under related brands. Each of these codes carries the same practical message as RFT. 

The differences among the acronyms lie in the maker and the internal construction, not in the warning they give. A technician can confirm the type by the code plus the construction described in the tire's specification. Reading the acronym is the first step of run flat [tire markings explained](/articles/tire-sidewall-symbols-dates-approval-markings-material-44526/) in plain terms. 

## How run-flat symbols appear on the sidewall 

A run-flat tire symbol is a small pictogram, often shaped like a wheel with a flat bottom, printed near the acronym. The run-flat tire symbols are not standardized between brands, so the shape differs from tire to tire. The symbol works as a quick visual clue next to the text code. 

Run flat tire symbols also include the letters themselves, because the acronym is what a machine or inspector reads. A run-flat sidewall symbol can be a stamp in the rubber or part of the molded lettering. Either way it marks the tire as capable of limited travel without air. 

The run-flat tire symbol meaning is simple: the tire can support the vehicle for a short distance at reduced speed after losing pressure. That meaning comes from the sidewall reinforcing structure, not the drawing. Treat the graphic as a prompt to read the full sidewall text. 

## Reading the RFT sidewall marking in order 

The RFT sidewall marking sits in the lettering band that runs around the tire, so read the band from the size numbers outward. Start with the size, then the load index, then the speed symbol, then any run-flat code. This order keeps you from missing the run-flat identifier among the other text. 

A typical sidewall prints the brand, the tire line, the size, the service description and the run-flat code in sequence. RFT tire sidewall text also includes the load range and the maximum inflation figures. Reading the RFT tire sidewall as a whole tells you both the tire's size and its run-flat status. 

If the sidewall is dirty or worn, the smaller run-flat code can fade before the larger size figures. Wipe the area and check the inside face of the tire as well, because some molds place a marking on both sides. A specialist can confirm the type when the molded text is no longer legible. 

## The speed rating next to a run-flat code 

Run flat tire speed rating appears as the letter speed symbol after the load index, such as V or W, and it applies to normal inflated use. The run-flat speed rating does not license driving fast on a flat. The speed symbol describes the tire's rated top speed under full pressure. 

Speed rating identification uses the letter in the service description, which is the [load index and speed symbol](/articles/tire-load-index-load-range-speed-ratings-material-44528/) pair. A run-flat tire carries a normal speed symbol because it still meets the same speed test under pressure. Reading that letter tells you the tire's rated speed, not its limp-home speed. 

The reduced-speed figure for driving after a pressure loss comes from the vehicle handbook, not the sidewall speed symbol. Do not read the speed symbol as permission to keep highway speed on a deflated run-flat. The two numbers answer different questions. 

## Extended mobility wording and other cues 

Extended mobility is a phrase used on some run-flat sidewalls in place of a short acronym, and it means the tire can travel a limited distance after air loss. Flat-tyre mobility wording works the same way and appears on other brands. Both phrases point to the same reinforced construction. 

The reinforced sidewall is the physical feature behind every run-flat marking, because the tire's sidewalls are built to carry the load without air pressure. A self-supporting sidewall holds the vehicle up briefly when pressure drops. The sidewall text names the feature, and the construction delivers it. 

Some run-flat tires carry no acronym at all and only show the words or a symbol, so absence of RFT is not proof of a standard tire. Check the tire line name and the specification when the sidewall is ambiguous. A tire technician can settle the question from the full sidewall and the tire data. 

## Matching run-flats on a vehicle 

Run-flat markings matter for matching, because a run-flat tire and a standard tire behave differently under load. Fit run-flat tires in matched pairs or as a full set, and never pair one with a standard tire on the same axle. Uneven construction can upset handling when a tire loses pressure. 

The vehicle's tire pressure monitoring system supports run-flat use by warning of pressure loss, since a run-flat can hide a slow leak. Check the system works and reset it after a wheel change. Rely on the warning rather than on feel, because a deflated run-flat can look normal. 

Mounting a run-flat tire on a rim needs equipment that can handle a stiff sidewall, and a trained technician should do the job. Do not attempt to seat a run-flat bead with hand tools, because the stiff sidewall can injure a person. Ask the specialist to confirm the tire's markings before fitting. 

## When the markings are unclear 

Run flat tire markings can become unreadable on a worn or dirty tire, and the safest step is to let a professional identify the tire. A technician can read the molded codes, check the specification and confirm the construction. Do not guess the type from appearance alone. 

The tire line name is a useful second clue, because manufacturers keep run-flat versions under the same line name. Compare the line name and the size with the maker's published specification. A tire shop with a trained staff member can settle an unclear case. 

Keep a note of the sidewall codes when you buy, so you can match replacements later without guesswork. Photograph the sidewall band before the tire is mounted. That record makes future run flat tire identification quick and accurate. 

## Questions about run-flat tire markings 

### How can I identify a run-flat tire from its markings? 

You identify a run-flat tire by looking for a run-flat code on the sidewall, such as RFT, RSC, ZP, DSST or EMT. The code sits in the sidewall lettering band with the size and speed symbol, and some tires add a wheel graphic. If the text is unclear, a technician can confirm the tire type from the specification. 

### What does RFT mean on a tire sidewall? 

RFT stands for Run-Flat Tire and marks a tire built to keep rolling after a loss of air pressure. The code appears among the other sidewall markings and signals a reinforced sidewall. RFT is a general label that some manufacturers use in place of their own acronym. 

### Is RSC the same as a run-flat marking? 

Yes, RSC stands for Run-On-Flat and is a run-flat marking used by a manufacturer. It carries the same practical meaning as RFT, ZP, DSST and EMT. A tire with RSC on the sidewall is a run-flat and should be matched with other run-flats. 

### What do ZP and RSC markings mean together? 

ZP and RSC markings together show a run-flat tire sold under related brands, with ZP meaning Zero Pressure. Both codes point to the same self-supporting sidewall construction. The pairing simply reflects the maker's labeling rather than two different tire types. 

### Does a run-flat tire have a speed rating on the sidewall? 

Yes, a run-flat tire carries a normal speed symbol, such as V or W, in its service description. That run-flat speed rating applies to the tire under full inflation, not to driving on a flat. The reduced speed for a pressure loss comes from the vehicle handbook. 

### What is the run-flat tire symbol meaning in simple terms? 

The run-flat tire symbol means the tire can carry the vehicle a limited distance at reduced speed after air loss. The symbol, often a wheel shape, works as a visual cue next to the acronym. The real capability comes from the reinforced sidewall, not the graphic.
