Recommended Tire Pressure for a Tesla Model Y
Find the recommended tire pressure for a Tesla Model Y, where the tire placard sits, how to read cold PSI, and what the Tesla app shows for each wheel.
Contents
- Where the tire placard sits
- Reading pressure as cold PSI
- Checking values in the Tesla app
- Tesla Model Y tire pressure questions
- What is the recommended tire pressure for a Tesla Model Y?
- Should I use the pressure on the tire sidewall instead of the placard?
- Why does the Tesla app show a different pressure than my gauge?
- Can I check the tire pressure on a Tesla Model Y without a gauge?
The recommended tire pressure for a Tesla Model Y is printed on the tire placard on the driver's side door pillar, and that figure is the cold PSI you should set with a gauge. The car's door pillar label lists the pressure for the tires fitted to that vehicle, so read it there rather than relying on memory or a sidewall number. Set the tires when they are cold, meaning the car has sat without driving, and check them again through the Tesla app or with a hand gauge.
Where the tire placard sits
The tire placard on a Tesla Model Y is fixed to the driver's side door pillar and opens with the driver's door. This label states the recommended cold pressure for the front and rear tires of that specific car. The placard is the authority for the Model Y because tire size and load rating change the figure. A photo of the label keeps the number handy when you fill air away from home.
Reading pressure as cold PSI
Cold PSI means the pressure in a tire that has not been driven and has cooled to the surrounding air temperature. A Model Y tire warms as it rolls, so the reading climbs above the cold figure after a drive. Check and set pressure before driving, or let the car sit long enough for the tires to cool. Use the cold number from the placard as your target, not the warm reading.
Checking values in the Tesla app
The Tesla app shows the pressure of each tire on a Model Y, and the car's touchscreen displays the same readings. These numbers tell you whether a tire has drifted from the placard figure and which wheel needs attention. The app reading reflects the tire as it sits, so compare it against the cold target when the car is rested. A gauge at the valve stem confirms the app value before you add or release air.
Tesla Model Y tire pressure questions
What is the recommended tire pressure for a Tesla Model Y?
The recommended tire pressure for a Tesla Model Y is the cold PSI printed on the tire placard on the driver's side door pillar. Read that label rather than a number from a forum or the tire sidewall, because the placard matches the tires fitted to your car. The front and rear figures can differ, so check both rows on the label.
Should I use the pressure on the tire sidewall instead of the placard?
No, the tire sidewall number is the maximum pressure the tire can hold, not the pressure a Tesla Model Y should run. The tire placard gives the recommended cold PSI for the vehicle and its fitted tires. Set pressure to the placard figure and treat the sidewall value as a limit, not a target.
Why does the Tesla app show a different pressure than my gauge?
The Tesla app can read slightly differently from a hand gauge because each sensor and gauge carries its own small tolerance. Tire temperature also moves the number, since a warm tire reads higher than a cold one. Compare the app value with a gauge when the Model Y has rested, and trust the cold reading against the placard.
Can I check the tire pressure on a Tesla Model Y without a gauge?
Yes, a Tesla Model Y reports tire pressure on the touchscreen and in the Tesla app, so you can see each wheel without a hand gauge. A gauge still helps when you add air, because it confirms the pressure at the valve stem as you fill. Use the app to spot a low tire and a gauge to set the cold PSI.