Reading Tire Size Codes: Decoding Sidewall Numbers
Learn how to read a tire size code on the sidewall by breaking down width, aspect ratio, construction letter, rim diameter, load index and speed rating.
Contents
- Width, aspect ratio and rim diameter
- Construction letter and size prefixes
- Load index and speed rating
- Tire Sidewall Code Questions
- How do I read a tire size code quickly?
- What do the numbers on a tire sidewall actually measure?
- What does the letter between the numbers mean?
- How do I decode a complex tire code with extra markings?
Reading tire size codes means splitting the sidewall marking into its parts and naming what each number measures. The first figure gives section width, the second is the aspect ratio, a letter shows the construction, and the next number is the rim diameter in inches. Load index and speed rating follow in their own positions, and a P-metric or LT prefix tells you which sizing standard the tire follows.
Width, aspect ratio and rim diameter
The size code reads left to right in a fixed order, so you can decode a sidewall at a glance. Section width is the tire width in millimeters, and the aspect ratio is the sidewall height as a percentage of that width. The last number of the three is the rim diameter in inches, which must match your wheel. A size code such as 225/45R17 shows all three parts in sequence.
Construction letter and size prefixes
A construction letter sits between the aspect ratio and the rim diameter and describes the internal structure. The letter R stands for radial construction, which is the format car and light truck tires use. A P-metric prefix marks a tire built to a passenger sizing standard, while LT marks a light truck size. The prefix changes the load figures a tire carries, so read it before comparing sizes.
Load index and speed rating
Two markings after the size give the load index and the speed rating, and each maps to a table rather than a simple unit. Load index is a code number for the maximum load a tire can carry at a set inflation pressure. Speed rating is a letter for the top speed the tire is built to sustain. Match both figures to your vehicle's requirements instead of choosing a tire on width alone.
Tire Sidewall Code Questions
How do I read a tire size code quickly?
Reading a tire size code quickly means splitting it into width, aspect ratio, construction letter and rim diameter in that order. The first two numbers are millimeters and a percentage, the letter is the construction, and the last number is the rim size in inches. Any figures or letters after those give the load index and speed rating. Practice on one marking and the sequence becomes automatic.
What do the numbers on a tire sidewall actually measure?
The numbers on a tire sidewall measure physical dimensions, not tread depth or age. Section width is given in millimeters, and the aspect ratio expresses sidewall height as a percentage of that width. Rim diameter is given in inches, and the load index is a code for carrying capacity. Mixing up the units is the main source of error when matching a tire to a wheel.
What does the letter between the numbers mean?
The letter between the numbers is the construction type of the tire. An R means radial, where the internal cords run across the tire rather than around it. Older or specialty sizes may show a different letter, so check the marking rather than assuming radial. A P or LT prefix before the numbers is separate and marks the sizing standard.
How do I decode a complex tire code with extra markings?
A complex tire code adds load index, speed rating and a DOT code alongside the basic size. Work through the size first, then read the load index and speed rating that follow it. The DOT code is a manufacturing identifier, not a size figure, so treat it separately. For fitting decisions, a trained tire technician can confirm that a decoded size suits your vehicle and wheel.