Radial vs Bias Ply Tires for Trailers

Compare radial and bias ply trailer tires: how each is built, how they flex and carry load, and what ST sidewall markings, ply rating and load rating tell you.

9 min read1 views
— · 0 votes
Contents
  1. How the two constructions differ
  2. Sidewall stiffness and trailer sway
  3. Tread wear and heat on the road
  4. Reading load rating and ply rating
  5. Ride quality and towing distance
  6. Choosing construction for your trailer
  7. Mixing sizes or constructions by mistake
  8. Radial vs Bias Ply Trailer Tire Questions
  9. Is radial or bias ply better for a trailer?
  10. Can I mix radial and bias ply tires on one trailer axle?
  11. What does the ST tire designation mean on a trailer tire?
  12. How does ply rating relate to trailer tire load rating?
  13. Does tire construction affect trailer sway?
  14. What do trailer tire sidewall markings tell me?

Radial and bias ply trailer tires differ in how their cords are laid inside the casing, and that changes how the tire flexes, carries load and behaves behind a tow vehicle. Bias ply tires use crisscrossing cord layers, while radial tires run cords straight across the tread with belts on top. The right pick depends on your load, your towing distance and how much sidewall stiffness you want.

  • Bias ply casings use crossed cord layers that stiffen the sidewall and resist squirm under load.
  • Radial casings flex more freely, which keeps the tread flatter on long highway runs.
  • An ST designation marks a tire built for trailer service, not for a passenger car.
  • Ply rating and load rating are separate figures, and both belong on your checklist.
  • Match the tire construction to the load, the terrain and the way the trailer tracks.

How the two constructions differ

Radial and bias ply trailer tires are named for the path their cords take through the casing. Bias ply tires stack cord plies at opposing angles, so each layer crosses the one beneath it. Radial tires run their body cords straight from bead to bead, at a right angle to the tread centerline.

A bias ply casing behaves like a stiff, woven shell, and the crossed plies lock the sidewall against distortion. A radial casing flexes at the sidewall while a belt package holds the tread steady. That belt is the extra structure a bias ply tire does not carry.

Both constructions appear in trailer service, and each suits a different job. The ST tire designation tells you the tire was engineered for trailer duty rather than steering a car. Construction sits underneath that label and shapes how the tire handles its work.

Sidewall stiffness and trailer sway

Trailer sway and tire construction are linked through sidewall stiffness, because a firmer sidewall resists the sideways push of a loaded trailer. Bias ply tires bring that firmness from their crossed plies. Radial tires get their lateral stability from the belts and tread package instead.

A bias ply sidewall deflects less under a shifting load, so the trailer body moves less in crosswinds and on crowned roads. Radial sidewalls absorb more road input, which smooths the ride but lets the trailer rock slightly more. Neither behavior removes sway caused by poor loading or an unbalanced hitch.

Sway control starts with tongue weight and load placement, and tire construction only refines what the setup already does. Check that cargo sits over the axles and that the hitch height matches the coupler. A trained specialist should inspect a trailer that sways with a balanced load.

Tread wear and heat on the road

Radial trailer tires keep a flatter tread footprint as the trailer rolls down the road, which spreads wear across the tread face. The flexible sidewall lets the casing shape itself to the road instead of dragging the shoulder. Bias ply tread tends to scrub at the edges when the trailer turns.

Heat builds in a tire that flexes hard, and construction changes where that flex happens. Bias ply casings run stiffer, so a heavy load concentrates stress in the tread and shoulder area. Radial casings move flex into the sidewall, which is why radial trailer tires suit long highway trips.

Tire pressure decides how much heat any casing carries, and an underinflated trailer tire runs hot in either construction. Check pressure cold before each trip and follow the figure on the sidewall marking for the load. A tire that shows bulges or cord lines needs replacement before the next tow.

Reading load rating and ply rating

Trailer tire load rating and trailer tire ply rating answer two different questions, and confusing them leads to an undersized tire. The load rating states the weight one tire can carry at a stated pressure. The ply rating is a strength index tied to the old cotton ply count, not a count of the plies in the tire.

A bias ply trailer tire often carries a ply rating such as 6 or 8, and that figure signals a stiffer casing built for heavier duty. Radial trailer tires may show a load range letter instead, such as C or D, which maps to a load capacity band. Both systems describe capability, and the load rating is the number to compare against your axle weight.

Trailer tire sidewall markings list the size, the load rating, the maximum pressure and the ST designation. Add the load ratings of the tires on an axle and keep the total above the loaded axle weight. Never fit a tire with a lower load rating than the one it replaces.

MarkingWhat it tells youHow to use it
ST size codeTire built for trailer serviceMatch the size to the wheel and fender clearance
Load ratingWeight one tire carries at a set pressureCompare the axle total against the loaded trailer
Ply ratingStrength index of the casingRead it with the load rating, not instead of it
Maximum pressurePressure for the full rated loadSet cold pressure by the actual load on the tire

Ride quality and towing distance

Ride quality separates the two constructions once the trailer is moving, and distance traveled makes the difference easier to feel. A bias ply trailer tire transmits road texture through the frame and can flat-spot during long storage. A radial trailer tire rolls more smoothly and holds its shape through a day of highway towing.

Short trips to a work site favor a stiff casing that shrugs off curbs and rough ground. Long hauls favor a radial casing that keeps the tread flat and the trailer settled at road speed. Match the construction to the miles the trailer actually covers rather than to a single trip.

A tire that sits for months develops a flat spot in either construction, and a bias ply casing may hold that set longer. Move the trailer before a trip and inspect the tread for cracks. Replace aged tires even when the tread looks deep, because rubber degrades with time and exposure.

Choosing construction for your trailer

Pick radial or bias ply trailer tires by matching the casing to the load, the road and the trailer's duty cycle. Heavy static loads and rough ground suit a stiff bias ply casing. Long highway miles and a smooth ride suit a radial casing with belts under the tread.

Keep both tires on an axle the same size, construction and load rating so the pair shares the work evenly. Mixing a radial and a bias ply tire on one axle creates uneven flex and can upset trailer tracking. Replace tires in axle pairs when one is worn beyond the tread limit.

Confirm that the wheel is rated for the tire and the pressure you plan to run, since a wheel limit can undercut a strong tire. Have a trained specialist check the axle, bearings and brakes whenever you change tire size or construction. A trailer that tracks straight and carries its load within rating is the goal.

  • Match the load rating to the loaded axle weight, not the empty trailer
  • Keep construction, size and load rating identical across an axle
  • Set cold pressure by the load the tire actually carries
  • Inspect sidewalls for cracks and bulges before each trip
  • Confirm the wheel is rated for the tire and its pressure

Mixing sizes or constructions by mistake

Mixing tire constructions on a trailer axle is a fitment error that shows up as uneven wear and restless tracking. A radial tire flexes at the sidewall while its bias ply neighbor stays stiff, so the two tires carry load differently. The mismatch can overload one tire without any visible sign.

Size mismatches cause the same trouble, and a taller tire on one side makes the trailer lean and pull. Measure the loaded radius of each tire and compare before you fit a replacement. Any difference beyond a small wear amount means the pair no longer matches.

Check the ST tire designation on every tire you buy for a trailer, because a passenger tire carries a different load and sidewall spec. Read the sidewall markings on the old tire and match size, load rating and construction. Ask a tire technician to verify fitment when a size change affects fender clearance.

Radial vs Bias Ply Trailer Tire Questions

Is radial or bias ply better for a trailer?

Neither construction is better for every trailer, because the right choice depends on load and distance. A bias ply casing suits heavy static loads and rough ground with its stiff sidewall. A radial casing suits long highway towing with its flatter tread and smoother roll.

Can I mix radial and bias ply tires on one trailer axle?

No, mixing radial and bias ply tires on one axle is a fitment error you should avoid. The two constructions flex differently, so they share load unevenly and can upset tracking. Fit the same size, construction and load rating across an axle.

What does the ST tire designation mean on a trailer tire?

The ST tire designation marks a tire built for trailer service rather than for steering or driving a car. An ST tire carries a sidewall and load spec set for trailer duty. Check that designation on every tire you fit to a trailer.

How does ply rating relate to trailer tire load rating?

Trailer tire ply rating is a strength index for the casing, while the load rating states the weight a tire carries at a set pressure. The ply rating is not a count of the plies in the tire. Read both figures together and compare the load rating against your loaded axle weight.

Does tire construction affect trailer sway?

Yes, trailer sway and tire construction connect through sidewall stiffness, since a stiffer sidewall resists sideways load movement. A bias ply casing deflects less under a shifting load. Load placement and hitch setup still drive sway more than any tire choice.

What do trailer tire sidewall markings tell me?

Trailer tire sidewall markings list the size, the load rating, the maximum pressure and the ST designation. These figures tell you whether the tire matches your axle weight and wheel. Compare them against the old tire before you buy a replacement.

Read next

Latest articles