Radial Tire Size Chart

Learn how a radial tire size chart works: read the width, aspect ratio and rim diameter on the sidewall, then compare overall diameter and fitment.

7 min read0 viewsRadial Tire Size Chart
— · 0 votes
Contents
  1. What a radial tire size chart shows
  2. Reading the sidewall size code
  3. Turning width and aspect ratio into sidewall height
  4. Calculating overall diameter from the chart
  5. Comparing sizes on a radial tire chart
  6. Checking fitment beyond the chart
  7. Limits of a radial tire size chart
  8. Radial Tire Size Chart Questions
  9. What does a radial tire chart tell me?
  10. How do I read a tire size like 225/45R17?
  11. How is overall tire diameter calculated?
  12. Can a size chart confirm that a tire fits my vehicle?
  13. Why do chart figures differ from the tire I measured?

A radial tire size chart turns the sidewall code into three numbers: section width, aspect ratio and rim diameter. Reading those values lets you compare the overall size of two tires before you fit either one. The chart is a reference for geometry, not a promise that a tire suits your vehicle.

  • A radial tire size code reads width, then aspect ratio, then rim diameter, as in 225/45R17.
  • Section width and aspect ratio together set the sidewall height, which affects overall diameter.
  • Overall diameter is the figure to compare when you check clearance and speedometer effect.
  • The letter R means radial construction, so construction is not a size figure.
  • A chart gives dimensions only; load and speed ratings sit elsewhere on the sidewall.

What a radial tire size chart shows

A radial tire size chart is a table that converts the sidewall size code into real dimensions. Each row lists a tire size and the width, sidewall height and diameter it produces. The chart does not describe tread, compound or grip, so treat it as a geometry reference.

The chart exists because the sidewall code hides simple arithmetic. A code such as 215/60R16 contains a width in millimeters, a ratio with no unit and a rim diameter in inches. Converting those mixed units into one consistent set of figures is the job of a radial tire size table.

Use the chart when you compare a tire you have with one you are considering. Both sizes must be read the same way, or the comparison means nothing. The sidewall size code is the input, and the calculated diameter is the output you check.

Reading the sidewall size code

The sidewall size code splits into three parts in a fixed order. The first number is the section width in millimeters, measured across the widest part of the inflated tire. The second number is the aspect ratio, a percentage of that width that gives the sidewall height.

The third figure is the rim diameter in inches, written after the construction letter. A code of 205/55R16 therefore means a 205 mm section width, a sidewall height of 55 percent of that width and a 16 inch rim. The letter R stands for radial construction and carries no dimension.

Some codes add a load index and a speed symbol after the size, such as 205/55R16 91V. Those characters describe capacity and speed capability, and they sit outside the size chart. Read the size first, then look at the extra markings separately.

Turning width and aspect ratio into sidewall height

Sidewall height comes from multiplying section width by the aspect ratio. A 205 mm width with a 55 aspect ratio gives a sidewall of about 113 mm on each side of the wheel. The calculation uses millimeters throughout, so the result stays in the same unit.

Aspect ratio changes the sidewall even when the width stays the same. Moving from 205/55 to 205/45 on the same rim shortens the sidewall by roughly 20 mm per side. The tire becomes shorter overall, and the ride height at that corner drops with it.

Width changes move the sidewall too, because the ratio applies to the new width. A 225/45 tire has a taller sidewall than a 205/45 tire, since 45 percent of a larger number is larger. Always recalculate rather than assuming the ratio alone sets the height.

Calculating overall diameter from the chart

Overall tire diameter combines the rim, the top sidewall and the bottom sidewall. The formula adds twice the sidewall height to the rim diameter, with the rim converted to millimeters first. A 16 inch rim equals about 406 mm, so the two parts can be added directly.

For a 205/55R16 tire the sidewall is about 113 mm, doubled to 226 mm, added to a 406 mm rim for a diameter near 632 mm. The same arithmetic in inches gives roughly 24.9 inches. Any radial tire size chart is built on this calculation.

Diameter matters more than any single figure when you compare fitment. Clearance to the suspension, the wheel arch and the brake caliper all depend on the outer size of the tire. A small change in diameter can matter where a change in width alone does not.

Comparing sizes on a radial tire chart

A tire size chart by width, aspect ratio and rim diameter lets you compare two sizes side by side. Place the rows next to each other and compare width, sidewall and diameter in turn. The largest difference tells you what the swap really changes.

Sizes can differ in width while sharing a diameter, or match in diameter while differing in width. A wider tire with a lower aspect ratio can keep the same overall diameter as a narrower, taller one. The chart makes that trade visible before anything is mounted.

Compare the new diameter with the old one as a pair, not in isolation. A diameter that grows or shrinks alters the gap to the bodywork and the reading on the speedometer. The chart gives the numbers, and the vehicle gives the limits.

Size codeSection widthAspect ratioRim diameterApproximate overall diameter
205/55R16205 mm5516 in632 mm
225/45R17225 mm4517 in634 mm
195/65R15195 mm6515 in635 mm
215/60R16215 mm6016 in664 mm

Checking fitment beyond the chart

A radial tire size chart describes dimensions and nothing else about fitment. Wheel width, offset and the space inside the wheel arch decide whether a size physically fits. The chart cannot see any of those, so it cannot confirm a fit on its own.

Load index and speed symbol must meet what the vehicle maker specifies for that car. Those ratings appear after the size code and are separate from the width, ratio and rim figures. A size that matches in geometry can still be wrong for the load it must carry.

Where the vehicle maker's specification and the chart disagree, follow the specification. Have a trained technician confirm clearance and rating when a size change is not listed for the vehicle. A chart narrows the options, and a specialist confirms the choice.

Limits of a radial tire size chart

Figures from a size chart are nominal, meaning they describe the tire as designed rather than as measured. Actual dimensions vary slightly between molds and with inflation pressure. Treat chart values as close guides, not exact measurements of a mounted tire.

Different tire models in the same size can differ a little in real width and diameter. Tread pattern and shoulder shape change the outer envelope without changing the code. The chart compares codes, so it compares designs rather than finished tires.

A chart also says nothing about wear, age or damage. Those conditions affect whether a tire is safe to use, and they sit outside any size table. Use the chart for geometry and inspect the tire itself for condition.

Radial Tire Size Chart Questions

What does a radial tire chart tell me?

A radial tire chart converts the sidewall size code into width, sidewall height and overall diameter. It answers questions about geometry, so you can compare two sizes before fitting either. It does not describe tread, grip or condition.

How do I read a tire size like 225/45R17?

A 225/45R17 tire has a 225 mm section width, a sidewall height of 45 percent of that width and a 17 inch rim. The letter R marks radial construction and is not a dimension. Load and speed markings, when present, follow the size code.

How is overall tire diameter calculated?

Overall diameter adds twice the sidewall height to the rim diameter. Convert the rim from inches to millimeters first, then add the figures. A 205/55R16 tire comes out near 632 mm using this method.

Can a size chart confirm that a tire fits my vehicle?

No, a size chart gives dimensions only and cannot confirm fitment. Wheel width, offset, brake clearance and load rating all affect whether a tire suits a vehicle. A trained technician should confirm any size the vehicle maker does not list.

Why do chart figures differ from the tire I measured?

Chart figures are nominal values for the size as designed. Real tires vary slightly with mold, model and inflation pressure. Measure a mounted tire if you need the actual dimension rather than the design figure.

Latest articles