# Quick Tire Size for 14-Inch Rims

Find the right tire size for a 14-inch rim fast. Read the sidewall code, check the load index and speed rating, and confirm the fit before you buy.

A 14-inch rim takes a tire whose sidewall code ends in 14, such as 185/65R14 or 175/70R14. The rim diameter is only part of the size, so you match the full code on the sidewall, not the wheel alone. The quick method is to read the width, the aspect ratio and the rim diameter in one line. 

- The last number in a size like 185/65R14 is the rim diameter in inches, so it must read 14.
- The first number is the tire width in millimeters and the second is the sidewall height as a percentage of that width.
- Two different tire sizes can fit one 14-inch rim, so the vehicle's original size decides the correct one.
- The [load index and speed rating](/articles/tire-load-index-load-range-speed-ratings-material-44528/) after the size must meet or exceed what the vehicle requires.
- A 14-inch rim can take only a tire built for a 14-inch bead seat, not a larger or smaller wheel size.
 

## Read the sidewall size code in order 

The [tire size code](/articles/tire-size-markings-width-aspect-ratio-construction-rim-size-material-44540/) on the sidewall answers the question in one glance once you know the order. A code like 185/65R14 reads left to right: width, aspect ratio, construction and rim diameter. The letter R stands for radial construction, which describes how the cords inside the tire are laid. 

The 185 is the section width in millimeters, measured across the widest part of the inflated tire. The 65 is the aspect ratio, the sidewall height as a percentage of the width. A 65 aspect ratio on a 185 width gives a sidewall about 120 millimeters tall. 

The 14 at the end is the rim diameter in inches and it must match your wheel exactly. A tire marked 185/65R15, for example, is built for a 15-inch rim and will not seat on a 14-inch wheel. Check the last number first when you want a quick answer. 

## Confirm the rim diameter is 14 inches 

The 14-inch rim diameter is the bead seat diameter, the ledge where the tire bead locks into place. Measure a wheel across its bead seat, not across the outer lip, to confirm the diameter. A wheel marked 14 on its face is built for a tire whose code ends in 14. 

Tire and wheel diameters use inches in this part of the code, while width uses millimeters. The mix of units is normal and appears on every sidewall, so read each number in its own unit. The diameter number does not tell you the width of the wheel, only the circle the bead sits on. 

A tire for a 14-inch rim cannot stretch onto a 15-inch wheel, and a 13-inch tire cannot be forced onto a 14-inch rim. The bead diameter is fixed by the wheel, so the size code must match it. Confirm the diameter before you look at any other number. 

## Use width and aspect ratio to compare tires 

The sidewall size code gives the width and the sidewall height, and those two numbers decide the overall tire dimensions. Section width in millimeters and aspect ratio together set the sidewall height. A wider tire with the same aspect ratio has a taller sidewall. 

Overall diameter equals the rim diameter plus twice the sidewall height. Convert the sidewall height to inches before you add it to the rim figure. Two sizes can share a 14-inch rim and still produce different overall diameters. 

A [tire size chart](/articles/commercial-truck-and-bus-tire-sizes-common-sizes-and-their-dimensions/) lists these dimensions side by side, which makes comparison quick. Match the overall diameter close to the original size to keep the speedometer reading near correct. The width also needs to suit the wheel width, which is a separate number from the diameter. 

## Check load index and speed rating 

The load index and speed rating sit after the size code and describe what the tire can carry and how fast it can run. A load index is a code for the maximum load one tire supports when inflated to its rated pressure. The speed rating is a letter for the top speed the tire is built to sustain. 

Both figures must meet or exceed the requirement for your vehicle, which the manufacturer states. A lower load index than required reduces the carrying capacity of the set. A lower speed rating than required limits how the tire can be used. 

The load index and speed rating do not change the rim diameter, so a correct 14-inch size can still be wrong for the vehicle. Read them as a separate check after the size code. The vehicle's tire placard gives the figures to match. 

## Match the original size for a 14-inch rim 

The original tire size for the vehicle is the reference point when you choose a tire for a 14-inch rim. The placard on the vehicle or the owner's manual lists the size the maker specified, including width, aspect ratio and load index. Start from that code and compare any alternative against it. 

A different width or aspect ratio on the same 14-inch rim changes the overall diameter and the clearance around the tire. A taller tire can rub on suspension or body parts, and a wider one can touch the inner wheel well. Check clearance before you fit a size that differs from the original. 

The rim width also limits which tire widths fit safely, and that width is stamped on the wheel. A tire that is too wide for the rim can sit badly on the bead, which is a safety concern. Where the fit is unclear, a trained tire technician should confirm the combination. 

## Avoid these sizing mistakes 

Reading only the 14 and ignoring the rest of the code is the mistake that causes most wrong purchases. The diameter is one part of a four-part code and the other parts decide whether the tire suits the vehicle. Write the full code down before you order. 

Mixing sizes on the same axle, or fitting a spare of a different diameter, can upset handling and the speedometer. Keep all tires on an axle the same size and check the spare against the fitted tires. A mismatched overall diameter also affects how the vehicle brakes and steers. 

Do not rely on a tire that looks the right size without reading the markings. Sidewall codes are the reliable record of width, aspect ratio, diameter, load and speed. When the markings are worn or unclear, ask a tire specialist to identify the size. 

## Questions About 14-Inch Tire Sizes 

### What tire size fits a 14-inch rim? 

Any tire whose size code ends in 14 fits a 14-inch rim, such as 185/65R14 or 175/70R14. The rim diameter is only one part, so the width, aspect ratio, load index and speed rating must also suit the vehicle. Match the full original size rather than the diameter alone. 

### How do I find the tire size quickly? 

Read the large code molded on the sidewall, which lists width, aspect ratio, construction and rim diameter in that order. The final number is the rim diameter in inches, and a 14 there means the tire is for a 14-inch wheel. The load index and speed rating follow after the size. 

### Can I put a 15-inch tire on a 14-inch rim? 

No, a 15-inch tire cannot seat on a 14-inch rim because the bead diameters differ. The last number in the size code must match the wheel diameter exactly. Forcing a mismatch can damage the tire or the wheel and is unsafe. 

### What does 185/65R14 mean? 

A 185/65R14 tire is 185 millimeters wide with an aspect ratio of 65 and radial construction, built for a 14-inch rim. The aspect ratio means the sidewall height is 65 percent of the width. The code describes the tire's geometry before any load or speed figures. 

### Do all 14-inch tires fit the same wheel width? 

No, a 14-inch tire can be built for different rim widths, and the wheel width is stamped on the wheel itself. The tire width must fall within the range the rim supports for the bead to seat correctly. Check both numbers, or ask a tire technician when the fit is unclear. 

### Where do I find the load index and speed rating? 

The load index and speed rating appear on the sidewall after the size code, such as 82H or 86T. The number is the load index and the letter is the speed rating. Both must meet or exceed the figures the vehicle manufacturer specifies.
