# Plus One Tire Size Calculator: Working Out a Plus-One Size

Learn how a plus-one tire size calculator works out a taller rim with a shorter sidewall, and how to compare overall diameter before you pick a wheel and tire combination.

A plus-one [tire size calculator](/articles/tire-size-calculator-diameter-comparison-material-44527/) helps you find a tire that fits a rim one inch larger while keeping the overall diameter close to the original. Plus sizing raises the wheel diameter and lowers the sidewall height to compensate, so the tire still fills the wheel well in a similar way. The goal is a wheel and tire combination whose rolling diameter stays near the stock figure, which keeps your speedometer reading and gearing roughly where they were. 

## How the calculator trades sidewall for rim 

A plus-one tire size calculator starts with your current tire size and adds one inch to the wheel diameter. The extra rim height has to come from somewhere, so the calculator looks for a shorter sidewall to keep the overall diameter close. Sidewall height is the aspect ratio percentage applied to the section width, so a lower aspect ratio shrinks the sidewall. This trade keeps the tire from growing taller than the space allows. 

## Reading the inputs you need to enter 

The tire size calculator inputs are the three numbers on your sidewall, written as width, aspect ratio and wheel diameter. Section width is the tire width in millimeters, and the aspect ratio is the sidewall height as a percentage of that width. The last number is the wheel diameter in inches, where the plus-one step happens. Enter the original size and the calculator returns a matching size on the larger rim. 

## Comparing rolling diameter before you buy 

A rolling diameter comparison shows how far the new size differs from the stock tire, and a small difference keeps the speedometer honest. The overall diameter combines the wheel diameter with the sidewall height above and below the rim. A plus-one size that is noticeably taller or shorter affects clearance and gearing, so check the numbers before committing. Clearance at the fender and suspension is a fitment question a trained tire specialist should confirm on your vehicle. 

## Plus-One Tire Sizing Questions 

### What does plus one mean in tire sizing? 

Plus one means moving to a wheel one inch larger in diameter while choosing a tire with a shorter sidewall. Plus-one sizing keeps the overall diameter near the original so the tire still fits the wheel well. The rim grows and the sidewall shrinks to balance the change. A plus-one tire size calculator does this comparison for you from the numbers on the sidewall. 

### How does a plus size tire calculator work? 

A plus size tire calculator compares your original tire size with candidates on a larger rim and reports the overall diameter of each. It uses the section width, aspect ratio and wheel diameter to figure sidewall height and total height. The result lets you see which size on the bigger wheel stays closest to the stock diameter. Reading the sidewall numbers correctly is the key input. 

### Does plus sizing change the speedometer reading? 

Plus sizing changes the speedometer reading only when the overall diameter differs from the stock tire. A plus-one size with a matching rolling diameter leaves the reading close to what it was. If the new tire ends up taller or shorter, the speedometer drifts because the wheel turns at a different rate. Compare rolling diameter before you decide. 

### What is aspect ratio reduction in plus-one sizing? 

Aspect ratio reduction is the step that shrinks the sidewall when the rim gets taller in a plus-one change. The aspect ratio is a percentage of section width, so a lower number means a shorter sidewall. Plus-one sizing relies on this reduction to fit the larger wheel without growing the overall diameter much. The calculator picks an aspect ratio that keeps the height close.
