# Passenger Van Tire Load Capacity

See how a passenger van tire load capacity is read from the sidewall load index and load range, and why inflation pressure sets the real limit per tire.

Passenger van tire load capacity is the maximum weight one tire can carry, printed on the sidewall as a load index and a load range. The load index is a code that matches a weight figure on a chart, and the load range describes how a tire is built for heavier duty. Reading both markings, then matching them to the van axle weights, tells you whether a set of tires fits the vehicle. 

## Reading the sidewall load index 

The passenger van load index is the number in the size line after the aspect ratio, such as 225/75 R16 121. That load index code is not a weight in pounds, so you look it up on a van tyre load rating chart to get the maximum load rating per tire. Two digits near 100 suit light vans, while higher codes cover a loaded 15-passenger van. The sidewall also shows a load range letter, and that letter describes the tire construction rather than a separate weight. 

## Load range and van duty 

Load range for passenger vans works alongside the load index and signals a stronger casing built for heavier loads. The letters run from standard light-duty markings up to the reinforced ranges used on full-size vans and Sprinter vans. A higher load range does not raise the load index by itself, because the two markings describe different things. Choose the load range the van manufacturer lists for the vehicle, since it reflects the weight the chassis is built to carry. 

## Pressure sets the real limit 

The maximum load rating for a van tire only holds at a stated inflation pressure, so pressure and load always travel together. A tire run below that pressure carries less than its sidewall figure, and heat builds as the sidewall flexes. Check the vehicle placard for the pressure the van maker lists for front and rear axles under load. Load capacity per tire depends on the axle weights of your loaded van, not on the tire alone; a trained tire technician can weigh the axles and confirm the fitment. 

## Passenger van tire load questions 

### What is the load index for a passenger van tire? 

The passenger van load index is a code printed in the tire size line that points to a maximum load figure on a chart. A 15-passenger van needs a higher load index than a small cargo van because it carries more weight on each axle. Match the index to the loaded axle weights the van maker states, and choose a replacement tire with at least the same index. 

### Is load range the same as load rating on a van? 

No, a load range and a load rating are different markings on a van tire. The load index is a number that maps to a maximum load figure, while the load range is a letter describing the tire casing strength. Both appear on the sidewall, and both matter when you compare replacement tires for a Sprinter van or a large passenger van. 

### Can I use a lower load rating tire on a van? 

No, fitting a tire below the load rating the van maker specifies reduces the weight each corner can safely carry. A lower-rated tire can also ride hotter under a loaded van and wear unevenly. Stay at or above the original load index and load range, and have a tire technician confirm the pairing before you drive loaded. 

### Does tire pressure change the load a van tire can carry? 

Yes, the maximum load rating of a van tire applies only at a stated inflation pressure. Run below that pressure and the tire carries less than its sidewall figure, with more sidewall flex and heat. Set pressure to the vehicle placard for your loaded van, and check it cold before a trip with passengers or cargo.
