Offset Calipers: Types, Uses and Brands

Offset calipers measure from an edge to a centerline with stepped jaws. Learn the types, how the offset points work, and what brands like Mitutoyo offer.

3 min read1 viewsOffset Calipers: Types, Uses and Brands
— · 0 votes
Contents
  1. How offset jaws reach a centerline
  2. Vernier, dial and digital offset types
  3. Brands and the 60 offset caliper
  4. Offset Caliper Questions Answered
  5. What is an offset caliper used for?
  6. What are caliper offset points?
  7. Is there a digital offset caliper with data output?
  8. What does a 60 offset caliper measure?

Offset calipers are calipers whose measuring jaws sit above or offset from the beam, so the tool can reach a feature that a straight jaw cannot touch. The offset points let you measure from an edge to a centerline, a bore wall, or a hidden shoulder without the beam getting in the way. This page explains the types of offset caliper, how the offset jaws work, and the brands that build them.

How offset jaws reach a centerline

Offset jaw calipers place the measuring faces on arms that step away from the main scale. That step lets the jaws enter a recess or pass over a rim while the beam stays clear of the part. An offset centerline caliper uses this reach to measure the distance from an outer edge to a hole center. Reading the scale correctly depends on knowing which face of the jaw is the reference.

Vernier, dial and digital offset types

An offset vernier caliper reads its measurement from a graduated scale and a sliding vernier plate. A digital offset caliper shows the value on a display and can send readings to a data collector. The digimatic offset caliper is a digital type with a data output port for recording measurements. All three types share the same offset jaw geometry, so the choice comes down to how you read and record the number.

Brands and the 60 offset caliper

Mitutoyo offset caliper models cover centerline and offset jaw designs in vernier and digital versions. A 60 offset caliper refers to a jaw or point arrangement angled at 60 degrees, which suits features cut at that angle. Caliper accuracy on any offset model depends on the jaw condition, the user's touch and the temperature of the part. Check that the offset points are sharp and undamaged before you trust a reading.

Offset Caliper Questions Answered

What is an offset caliper used for?

An offset caliper is used to measure a feature that a straight jaw cannot reach, such as a distance from an edge to a centerline. The offset jaws clear an obstruction while the measuring faces contact the surfaces you need. Tire and wheel work uses this reach to check hub and rim geometry where the beam would otherwise hit the part.

What are caliper offset points?

Caliper offset points are the measuring faces set on arms that stand away from the beam. The points carry the contact surface to the feature, and the scale reads the distance between them. Offset points need to stay square and clean, because a worn point shifts every reading you take.

Is there a digital offset caliper with data output?

A digital offset caliper can come with a data output port, and the digimatic offset caliper is one example of that design. The port lets you send a reading to a collector or computer instead of writing it down. Confirm the output format of the model before you buy, since connectors differ between makers.

What does a 60 offset caliper measure?

A 60 offset caliper carries jaws or points set at a 60 degree angle for features cut to that angle. The angled faces sit flush on the sloped surface and let the scale read across it. Use it only on the angle it was built for, since a mismatched jaw contact gives a false value.

Latest articles