# Off-Road Tire Sidewall Markings Explained

Read an off-road tire sidewall with confidence: size codes, LT and P-metric prefixes, load index, speed rating, ply rating, and the DOT date code.

Off-road [tire sidewall markings](/articles/tire-sidewall-symbols-dates-approval-markings-material-44526/) tell you the tire's size, its load and speed limits, and how it is built. The size code gives width, aspect ratio, and wheel diameter, while letters and numbers around it give the construction type, the load range, and the date of manufacture. Reading the sidewall in a set order turns a crowded strip of text into a clear specification. 

- Read the size code first: width, aspect ratio, then wheel diameter in inches.
- A letter before the size shows the tire class, such as P for passenger or LT for light truck.
- The [load index and speed rating](/articles/tire-load-index-load-range-speed-ratings-material-44528/) pair sets the maximum load and speed for the tire.
- The load range and ply rating describe sidewall strength and load-carrying capacity.
- The DOT code shows the week and year the tire was made.
 

## What the sidewall of an off-road tire shows 

An off-road tire sidewall carries a set of codes that describe size, construction, and capacity. The same strip of rubber also carries the tire name, the tread pattern family, and the manufacturer's own labels. Grouping these markings by purpose makes them easier to read. 

The off-road tire sidewall is the outer wall of the tire that faces sideways on the vehicle. Every marking on it is molded in by the maker at the factory. Nothing on the sidewall is decorative once you know the codes. 

Off-road tire markings follow the same basic system as road tires, with extra letters and load information for trucks and utility vehicles. Reading them in a fixed order avoids confusion. Start with the size, then the class prefix, then load and speed, then the DOT code. 

## Reading the tire size code step by step 

The [tire size code](/articles/tire-size-markings-width-aspect-ratio-construction-rim-size-material-44540/) is the largest group of numbers on the sidewall and it comes in a metric or flotation form. An off-road tire size such as 285/70R17 gives section width in millimeters, aspect ratio as a percentage, radial construction, and wheel diameter in inches. 

The first number is the section width, measured across the widest part of the inflated tire. The second number is the aspect ratio, which is the sidewall height as a percentage of the width. A lower aspect ratio means a shorter, wider-looking sidewall. 

The letter between the numbers is the construction letter, and R stands for radial. The final number is the wheel diameter in inches, so the tire fits a rim of that size. Flotation sizes use inches throughout, such as 33x12.50R15, and suit light trucks and off-road builds. 
| Marking part | Example | What it means | 
| Section width | 285 | Tire width in millimeters | 
| Aspect ratio | 70 | Sidewall height as a percentage of width | 
| Construction | R | Radial construction | 
| Wheel diameter | 17 | Rim size in inches |  

## LT and P-metric prefixes and tire class 

A letter placed before the size shows the tire class, and this prefix matters for off-road use. P means passenger car metric, while LT means light truck metric. The LT and P-metric prefixes tell you which load standards the tire was built to meet. 

LT metric sizing carries higher load capacity for the same physical size than a passenger tire. Light truck tires also come in load ranges that suit hauling and rough ground. A passenger tire on a heavy vehicle may not carry the load the axle needs. 

The prefix also affects how the load index is interpreted. An LT tire often lists a load index for single and dual wheel use. Check the vehicle's tire placard before swapping between classes. 

## Load index, speed rating, and what they limit 

The load index and speed rating appear together as a number followed by a letter, such as 121S. The load index is a code for the maximum load the tire can carry at a stated pressure. The speed rating is a letter code for the top speed the tire is approved for. 

Higher load index numbers mean higher carrying capacity, and the matching table converts the number to a weight. The speed rating letter follows the same idea, from low letters up to high-performance codes. An off-road tire often carries a lower speed rating than a road tire of the same size. 

Never exceed the load index or speed rating of the tire fitted to the vehicle. Overloading a tire beyond its index can damage the tire and reduce control. The vehicle manufacturer's placard and manual set the real limits for the axle. 

## Load range and ply rating explained 

Load range and ply rating describe how strong the tire carcass is, and they appear as letters or numbers on the sidewall. The load range is a letter code, from C upward for light truck tires. The ply rating is a number that reflects the old cotton-ply standard rather than the actual number of plies. 

A tire with a higher load range carries more load at the same inflation pressure. Off-road drivers often choose a higher load range for rocky ground and heavy loads. A stiffer sidewall protects against punctures but can ride harder on pavement. 

The load range letter and the load index work together, so both must suit the vehicle. Matching the load range to the axle load keeps the tire within its design. Towing and hauling raise the load the rear axle must support. 

## All-terrain and mud-terrain sidewall labels 

Off-road sidewall codes often include a tread family label such as all-terrain A/T or mud-terrain M/T. The all-terrain tire markings point to a tread built for mixed pavement and trail use. The mud-terrain label points to a more open tread for soft ground. 

These labels are the manufacturer's description of the tread pattern, not a regulated standard. Two tires with the same A/T label can differ in tread depth and void ratio. Reading off-road tire names this way helps you compare designs within one brand. 

A mud and snow rating, shown as M+S, marks a tire designed for mud and snow traction. The M+S marking is a self-declared design label in many markets and does not by itself mean a winter tire. A three-peak mountain snowflake symbol is a separate certification for severe snow use. 

## Sidewall construction codes and the DOT code 

Sidewall construction details cover the number of plies and the materials used in the carcass and belts. The sidewall may list the tread plies and sidewall plies separately, with materials such as polyester or steel. These details help a technician judge how stiff and how durable the tire is. 

The DOT code is a sequence that starts with the letters DOT and ends with four digits. The final four digits give the week and the year of manufacture, for example 2324 means the 23rd week of 2024. Tires made before the year 2000 used three digits, so check any older tire carefully. 

The DOT code also contains a plant code and a size or model code in the earlier characters. A tire stored for a long time can age even without wear, so the date matters when buying used tires. Inspect the sidewall for cracks as well as reading the code. 

## Checking sidewall markings against the vehicle 

Sidewall markings only work if they match the vehicle and the wheel they are fitted to. The vehicle placard lists the tire size and the recommended inflation pressure for the original fitment. Compare the sidewall size code and load index to that placard before fitting a new set. 

A different wheel width changes how the tire sits on the rim, so check the approved [rim width range](/articles/approved-rim-widths-by-tire-size-checking-tire-and-rim-compatibility/). A tire that is too wide for the rim can wear unevenly and handle poorly. A tire that is too narrow can damage the bead area. 

Mounting, balancing, and any repair that touches the bead or sidewall need a trained tire technician. A damaged sidewall cannot be repaired safely in the way a tread puncture can. When a sidewall shows a bulge, a cut, or exposed cords, the tire should come off the vehicle. 

## Off-road tire sidewall questions 

### What do off-road tire sidewall markings tell me? 

Off-road tire sidewall markings tell you the tire size, its construction type, the load index and speed rating, the load range, and the date of manufacture. They also carry tread family labels such as all-terrain or mud-terrain. Reading them in order gives a complete picture of the tire's design and limits. 

### How do I read an off-road tire size like 285/70R17? 

An off-road tire size of 285/70R17 means a section width of 285 millimeters, an aspect ratio of 70 percent, radial construction, and a 17-inch wheel diameter. The [width and aspect ratio](/articles/comparing-tire-width-and-aspect-ratio/) together set the sidewall height. The last number must match the rim size. 

### What is the difference between LT and P-metric tire prefixes? 

The LT prefix means the tire is built to light truck load standards, while P means passenger car metric standards. An LT tire carries more load for its size and often comes in higher load ranges. Use the class that matches your vehicle's placard and axle load. 

### What do load range and ply rating mean on an off-road tire? 

Load range is a letter code for the tire's load-carrying strength, and ply rating is a number tied to the older cotton-ply standard. A higher load range supports more load at a given pressure and often comes with a stiffer sidewall. The two codes describe construction, not the actual number of plies in a modern tire. 

### What does the DOT code on the sidewall mean? 

The DOT code is the tire's manufacturing identifier, and its last four digits give the week and year of production. A code ending in 2324 means the 23rd week of 2024. The date helps you judge the age of a tire, especially one bought used. 

### Does an M+S marking make a tire suitable for winter? 

An M+S marking means the tire is designed for mud and snow traction, but it is a design label rather than a winter certification. A three-peak mountain snowflake symbol marks a tire tested for severe snow conditions. For ice and deep snow, check for that symbol as well as the M+S label.
