# Obsolete Tire Size Systems Explained

Learn how phased-out tire size codes worked, from letter-width and aspect ratio systems to alpha-numeric markings, and how to read a legacy size today.

Obsolete tire size systems are older ways of writing a tire size that have been phased out of new tire production. They used letters, numbers and codes that do not match the metric format you see on a modern sidewall. Reading one means translating each part of the old code into a width, a profile and a rim diameter you can compare. 

- Old tire codes often mix a letter for the width with a number for the aspect ratio.
- The same digits can mean different things depending on which legacy system wrote them.
- A discontinued size usually needs a conversion to a modern metric size before you shop.
- Rim diameter and load capacity are the details a conversion must preserve.
- A trained tire specialist should confirm any fitment before a tire is mounted.
 

## What the obsolete tire size systems are 

Obsolete tire size systems are families of tire markings that manufacturers and standards bodies stopped using for new tires. Each family describes width, sidewall height and rim diameter in its own code instead of the metric format. The codes survive on older vehicles, spare tires and vintage equipment. 

Tire size system history moved from simple inch and letter codes toward a uniform metric format. Early codes often described a tire by its approximate width letter and rim size only. Later systems added an aspect ratio number to describe sidewall height as a share of width. 

Discontinued tire size designations still appear in owner manuals, registration papers and used tire listings. A driver who reads one of these codes needs to know which system produced it. The letters and numbers mean different things from one legacy system to the next. 

## Letters that describe tire width 

Several legacy tire sizing systems used a letter to stand for a width range in inches. A letter such as A, B, C or D signaled a wider tire as the letter moved up the alphabet. The letter did not give an exact width, so two tires with the same letter could differ slightly. 

Alpha-numeric markings combined that width letter with an aspect ratio number and a rim diameter. A code like E78-14 fits this pattern, where E is the width class, 78 is the aspect ratio and 14 is the rim size in inches. Reading each part separately keeps the meaning clear. 

These phased-out tire size codes do not convert to a single modern size with perfect accuracy. Width ranges overlap between letters, so a conversion lands on a metric size that sits inside the range. A tire specialist can judge which modern size keeps the closest fit. 

## The 78 series and other aspect ratios 

Legacy tire sizing systems expressed sidewall height as a two-digit aspect ratio, much as metric sizes do today. A 78 series tire had a sidewall height equal to 78 percent of its width. Lower numbers meant a shorter, wider-looking sidewall on the same width. 

Common aspect ratios in these systems included 78, 75, 70 and 60 series. A smaller ratio number made the tire shorter in overall diameter for a given width. That change affected speedometer readings and clearance in the wheel well. 

Historical tire size standards organized these ratios into a series that tire makers followed. One series could sit beside another with a different width letter, which is why two old codes rarely match directly. The aspect ratio number is the part that converts most cleanly to a metric size. 

## Numeric and inch-based sizing 

Some historical tire size standards described a tire with plain numbers, such as 7.75-14 or 6.50-13. The first number was the approximate section width in inches, and the second was the rim diameter. No aspect ratio appeared because the sidewall height was fixed by the series. 

Numeric sizes belonged to a series with a set aspect ratio, so the width and rim alone defined the tire. A wider first number meant a wider tire on the same rim. These codes faded as metric sizing spread across new vehicles. 

A numeric code is easy to misread because the numbers look like metric figures. Metric sizes use millimeters for width and a slash before the aspect ratio. A dash between two numbers points to the older inch-based format instead. 

## Metric and P-metric markings 

Metric tire sizing replaced the legacy systems with a uniform format that states width in millimeters. A size like 205/75R15 gives width, aspect ratio, construction and rim diameter in one line. The P prefix marks a passenger tire built to a specific standard. 

European metric sizes often drop the P and may add a [load index and speed symbol](/articles/tire-load-index-load-range-speed-ratings-material-44528/). These markings belong to the current system rather than an obsolete one. Mixing a legacy code with a metric code without converting the width first produces a wrong comparison. 

The metric format is the reference point for any conversion from a discontinued size. Width in millimeters, aspect ratio as a percentage and rim diameter in inches form the three numbers to match. A specialist compares overall diameter and section width before choosing a substitute. 

## How to convert an old code to a modern size 

Converting a legacy tire sizing system starts with identifying which system wrote the code. Look for a letter, a dash or a slash because each pattern points to a different family. Write down each part and label it as width, aspect ratio or rim. 

Translate the width into millimeters and keep the rim diameter unchanged. Then pick a metric aspect ratio that brings the overall diameter close to the original. Overall diameter matters because it affects gearing, clearance and the speedometer. 

A conversion is a starting point rather than a final answer. Tire construction, load range and rim width can change what fits a given vehicle. A trained tire technician should confirm the fitment before any tire is mounted. 
| Old code pattern | Width part | Aspect ratio part | Rim part | 
| E78-14 | E width class | 78 series | 14 inches | 
| 7.75-14 | 7.75 inches | Set by series | 14 inches | 
| 205/75R15 | 205 millimeters | 75 percent | 15 inches |  

## Risks of fitting a converted size 

A converted size can change how a vehicle handles and how its instruments read. A larger overall diameter turns the wheel slower and shifts the speedometer reading. A narrower tire changes the contact patch and the load it can carry. 

Load capacity deserves attention when an obsolete size is replaced. Old codes often carried a load range letter rather than a modern load index. A substitute tire must meet or exceed the load the vehicle needs at each corner. 

Mounting a tire that does not match the rim width or the vehicle clearance can damage the tire, the wheel or the bodywork. A qualified tire specialist should check rim width, clearance and load rating before fitting. Do not rely on a code conversion alone for a safety-critical part. 

## Finding tires for a discontinued size 

Discontinued tire size designations may have no direct replacement in new tire catalogs. The route forward is a metric equivalent that keeps overall diameter and load capacity close. Specialty suppliers and vintage tire makers serve some old sizes directly. 

A specialist can measure the original tire and compare it with candidate metric sizes. Measuring the mounted tire gives real numbers for diameter and width. Those numbers matter more than the old code when the code is unclear. 

Record the converted size and the rim details for future reference. A clear record helps the next tire purchase and avoids repeating the conversion work. Keep the original marking too, since it identifies the vehicle's intended fitment. 

## Questions about obsolete tire sizes 

### What are obsolete tire size systems? 

Obsolete tire size systems are older tire marking formats that manufacturers no longer use for new tires. They include letter-width codes, alpha-numeric sizes and inch-based numeric codes. Each system states width, sidewall height and rim diameter in its own way. 

### Can an old tire size be converted to a modern one? 

Yes, an old tire size can be converted to a modern metric size as a starting point. The conversion matches width in millimeters and keeps the rim diameter the same. A tire specialist should confirm the result against overall diameter and load capacity. 

### What does a code like E78-14 mean? 

An E78-14 code comes from an alpha-numeric legacy system. E is a width class, 78 is the aspect ratio and 14 is the rim diameter in inches. The width class stands for a range rather than an exact figure. 

### Why did tire makers stop using legacy size codes? 

Tire makers moved to metric sizing so that a size would mean the same thing across brands and borders. Legacy codes described width in ranges and varied between systems. A uniform metric format made comparison and replacement simpler. 

### Is it safe to fit a converted size without checking? 

No, fitting a converted size without a check can be unsafe. Overall diameter, rim width, clearance and load rating all affect whether a tire suits a vehicle. A trained tire technician should verify the fitment before mounting.
