# New Tire Purchase Checklist

A step-by-step new tire purchase checklist covering size, load index, speed rating, date code, tread, fitment, warranty and the full installed cost.

A new tire purchase checklist starts with the numbers on your current sidewall and the placard on your vehicle. Match size, [load index and speed rating](/articles/tire-load-index-load-range-speed-ratings-material-44528/) first, then check the date code, tread and condition, and confirm fitment before you pay. Finish by adding every fee and reading the warranty so the total installed cost holds no surprises. 

- Copy the size, load index and speed rating from the sidewall and the vehicle placard before you shop.
- Read the DOT date code so you know how old a tire is before it goes on the car.
- Inspect tread depth and the sidewall for damage on any tire you are offered.
- Add balancing, installation and disposal fees to the sticker price for the real total.
- Confirm rim compatibility, clearance and the warranty terms before money changes hands.
 

## Start with the vehicle placard and sidewall 

The vehicle placard tells you the tire size, load index and speed rating the manufacturer specifies for your car. You find this sticker on the driver door jamb, the fuel door or inside the glovebox, depending on the model. The placard also lists the recommended inflation pressure, which matters when you compare tires. 

Your current tire sidewall repeats the size in a format like 225/45R17. The first number is the section width in millimeters, the second is the aspect ratio, and the letter gives the construction. The number after the letter is the rim diameter in inches, so you can check rim compatibility at a glance. 

Write down the full size string, the load index and the speed rating before you shop. A replacement tire that misses any of these numbers changes how the car carries weight and how it responds at speed. Carry the note with you so you can compare any tire you are offered. 

## Decode the sidewall numbers you must verify 

[Tire sidewall markings](/articles/tire-sidewall-symbols-dates-approval-markings-material-44526/) carry the size, the load index and the speed rating in one line near the bead. A load index is a code for the maximum weight the tire can carry, and the speed rating is a letter for the top sustained speed. Both must meet or exceed the placard figures. 

Aspect ratio describes the sidewall height as a percentage of the section width, so a lower number means a shorter sidewall. Changing the aspect ratio alters the overall tire diameter, which affects speedometer accuracy and clearance. Keep the overall diameter close to the original when you consider a different size. 

Look for the M+S or three-peak mountain snowflake marking if you drive in winter conditions. Tire type and tread pattern decide how the tire handles rain, snow and dry pavement. The sidewall also shows the DOT code, which you read in the next step. 
| Marking | What it tells you | 
| 225/45R17 | Section width, aspect ratio, construction and rim diameter | 
| 94 | Load index, the maximum load the tire carries | 
| V | Speed rating, the top sustained speed | 
| DOT code | Plant and date of manufacture | 
| M+S | Mud and snow tread designation |  

## Check the DOT date code for tire age 

The DOT date code is the four-digit number at the end of the DOT stamp on the sidewall. The first two digits give the week of manufacture and the last two give the year. A tire marked 3223 was built in the thirty-second week of 2023. 

Tire age matters because rubber compounds change as they sit in storage and on the car. Ask to see the date code on the exact tires you are buying, not on a display model. A tire that has sat for years before mounting is worth questioning even when it looks new. 

Check that the DOT code is present and legible on every tire in the set. A missing or altered code is a reason to walk away from the purchase. Record the codes so you can confirm the same tires arrive at installation. 

## Inspect tread depth and sidewall condition 

Tread depth tells you how much rubber remains before the wear indicators are reached. The wear bars molded into the grooves show the minimum depth, and a tread at that level needs replacement. A [tread depth gauge](/articles/tread-depth-gauge-for-tires-what-it-is-and-what-it-measures/) gives a precise reading across the width of the tire. 

Tire inspection covers the sidewall as well as the tread. Look for cuts, bulges, cracks and embedded objects that can weaken the casing. A bulge in the sidewall means the internal structure is damaged and the tire is not safe to fit. 

Uneven wear across the tread points to an alignment or inflation problem on the vehicle. Ask for an alignment check when a new set goes on, so the replacement tires wear evenly. Tread wear rating on the sidewall gives a relative guide to tread life within the maker's line. 

## Match tire type to your driving conditions 

Driving conditions decide which tire type suits your car, from summer tires to all-season and winter designs. Summer tires grip well in warm weather but lose flexibility in cold temperatures. Winter tires use a softer compound and deeper tread for snow and ice. 

Tread pattern shapes how water clears from under the tire and how the tire sounds on the road. Directional and asymmetric patterns have a defined mounting direction, so fitment must respect it. Ride comfort depends on sidewall height and the tire construction as much as on the brand. 

Budget tire options can meet the size and load requirements of your car at a lower price. Compare their speed rating, tread wear rating and warranty against the tires you already run. A cheaper tire that misses a required rating is not a valid substitute. 

## Confirm fitment before you commit 

Vehicle fitment means the tire physically fits the rim, the wheel well and the brake package without rubbing. Rim compatibility depends on [rim width and diameter](/articles/wheel-measurements-explained-diameter-width-offset-and-more/), which must suit the tire's section width. A fitment check before buying avoids returns and damaged components. 

Check clearance to the suspension, brake calipers and inner fender at full steering lock. A larger overall diameter or a wider section can contact these parts on some cars. A trained technician can verify clearance when the answer is not obvious from the numbers. 

Replacement tire compatibility also covers the spare and any staggered setup on the car. Some vehicles use different sizes front and rear, so each position needs its own check. Confirm the tire matches the position it will serve, not just the model name. 

## Build the total installed cost 

Tire price on the shelf is only part of the tire purchase budget. Balancing fees, fitment and installation fees, valve stems and tire disposal fees add to the bill. Ask for the total installed cost in writing before you agree to the sale. 

Installation costs vary with the wheel size and the work required to mount and balance each tire. Disposal fees apply when the shop takes your old tires away, and some shops charge for nitrogen or road hazard coverage. A quick new tire checklist includes every line of the invoice, not just the tire line. 

A fast tire purchase checklist still leaves room to compare two or three quotes on the same tire. Set your tire budget around the total purchase cost rather than the sticker price. That approach keeps the financial side of the purchase clear from the start. 

## Review warranty, returns and the final handover 

Tire warranty terms vary by brand and cover different things, so read the document before you buy. A treadwear warranty, a workmanship warranty and a road hazard policy are separate promises. Ask what the return policy allows if the tire does not suit the car. 

The tire brand and warranty should be recorded on the invoice along with the DOT codes. Rebates and promotions can change the effective price, so confirm they apply to your purchase. Keep the paperwork for any future claim. 

At handover, check the mounted tires for the correct size, the date code and the inflation pressure. Confirm the wheel nuts are torqued to the vehicle specification and ask for the reading. A final walk around the car closes the checklist. 

## Questions about the tire purchase checklist 

### What should I check before buying new tires? 

Check the vehicle placard and your current sidewall for size, load index and speed rating, then confirm the DOT date code, tread depth and sidewall condition. Verify rim compatibility and clearance, and ask for the total installed cost including fees and the warranty terms. 

### What do I need to know when buying tires for the first time? 

Know that the size string on the sidewall controls fit, and that load index and speed rating must meet the placard figures. Tire type should match your driving conditions, and the purchase price is not the full cost once installation and disposal fees are added. 

### Which numbers on the tire sidewall should I verify at purchase? 

Verify the size, load index, speed rating and DOT date code on every tire in the set. The size confirms rim compatibility, the load and speed codes confirm the tire suits the car, and the date code tells you when the tire was made. 

### How do I know a new tire is not too old? 

Read the four-digit DOT date code on the sidewall, where the first two digits are the week and the last two are the year. Ask to see the code on the exact tires you are buying, and question a set that has sat in storage for a long time. 

### What costs are included in the total tire purchase price? 

The total installed cost includes the tire price plus balancing, installation, valve stems and tire disposal fees. Ask for a written quote that lists every charge, so you can compare offers on the same basis. 

### Should a technician check fitment before I buy? 

Yes, a trained technician should confirm vehicle fitment when clearance to the suspension, brakes or fender is uncertain. Rim compatibility and clearance are quick to check on most cars, and the check prevents returns and damage after mounting.
