Motorcycle Tire Size and Rim Width
Learn how motorcycle tire size codes work, how sidewall markings give width, aspect ratio and rim diameter, and how rim width affects tire fitment.
Contents
- Reading the sidewall size code
- How tire dimensions are measured
- Rim width and fitment ranges
- Questions About Motorcycle Tire Fitment
- Can I change my motorcycle tire size?
- How do motorcycle tire sizes work?
- How do I measure my motorcycle tire size?
- Is rim width and tire size compatibility checked with a calculator?
Motorcycle tire size and rim width work together, because a tire number must match the wheel it sits on. This page explains the size code on the sidewall, how section width and aspect ratio produce a tire's dimensions, and how rim width affects fitment. It also covers what changes when you move to a different tire size and how to check compatibility before buying.
Reading the sidewall size code
A metric motorcycle tire size reads as three numbers, for example 120/70 and a rim diameter. The first number is the section width in millimeters, the second is the aspect ratio, and the last is the rim diameter in inches. The aspect ratio is the sidewall height given as a percentage of the section width. Some tires use an inch code instead, where the first figure is the approximate tire width in inches.
How tire dimensions are measured
Motorcycle tire sizing is measured on a specified rim, so the section width on the sidewall is a nominal figure. A wider rim spreads the tire and can add measured width, while a narrower rim pinches it in. Sidewall markings give the nominal size, load and speed ratings, and the rim the tire was measured on. Measure the actual tire with a tape only after it is mounted and inflated.
Rim width and fitment ranges
Every tire is designed for an approved rim width range, and fitting outside that band changes the tire's shape. A tire on too narrow a rim can pull the beads inward and reduce stability, while too wide a rim flattens the profile. Rim width codes such as MT or WM describe the wheel, and the tire maker lists compatible widths for each size. A fitment chart or compatibility calculator compares tire size with rim width, but the tire maker's data decides.
Questions About Motorcycle Tire Fitment
Can I change my motorcycle tire size?
Changing motorcycle tire size is possible within limits set by the rim width and the space around the wheel. A wider tire needs a wider rim and clearance for the swingarm, fender and chain, and it alters steering and gearing. Check the approved rim width range and keep the change small, or ask a tire technician to confirm fitment.
How do motorcycle tire sizes work?
Motorcycle tire size codes combine a section width, an aspect ratio and a rim diameter into one string on the sidewall. The width is in millimeters, the aspect ratio is a percentage that sets sidewall height, and the diameter is in inches. An inch size code replaces the first two figures with an approximate width in inches.
How do I measure my motorcycle tire size?
Reading the sidewall markings is the direct way to find the motorcycle tire size a bike carries. If the markings are worn, measure the tire's width across the tread and the sidewall height, then note the wheel diameter. A rim width and tire size chart then confirms which sizes the wheel accepts.
Is rim width and tire size compatibility checked with a calculator?
A rim width and tire size calculator gives a quick motorcycle fitment check by comparing the tire size with the rim width band. The result is only as good as the data behind it, so confirm the approved rim width range with the tire maker. Calculators help narrow choices, but a trained technician should sign off unusual combinations.