# Motorcycle Rear Wheel Rim Size for a Specific Model

How to confirm the rear rim size for one motorcycle model by reading the stamping, checking the tire size, and matching rim width and diameter.

The rear rim size for a specific motorcycle model is the diameter and width stamped on the rim itself, not a figure you assume from the model name. Read the stamping on the rear wheel, then compare it with the tire size printed on the sidewall. That pairing confirms what fits before you order a replacement. 

- The rim stamping gives diameter and width directly, so read it before any other check.
- A tire sidewall number describes the tire, while the rim stamping describes the metal wheel.
- Rim diameter must match the tire bead seat diameter, and rim width must sit inside the tire maker's approved range.
- A model name alone does not fix a rim size, because variants and market versions can differ.
- A trained tire technician should confirm a fitment when the stamping is unclear or damaged.
 

## Where the rim size is stamped 

The rear rim size is stamped into the metal of the wheel, so look there before trusting any other number. Check the rim flange, the spoke area, or the inner surface near the hub for a marking such as 2.50 x 17. Letters and numbers together describe the width, the symbol, and the diameter. 

Rim markings use inches for width and diameter on the wheels of a motorcycle or scooter. A figure like 2.50 is the rim width measured between the flanges, and 17 is the rear rim diameter at the bead seat. Some stamps add a letter code for the flange shape, which matters for tire seating. 

Grime, paint, and a chain guard can hide the stamping, so clean the rim and use a light at a shallow angle. Never guess the size from the tire that happens to be fitted, because a previous owner may have mounted the wrong one. If the stamping is worn away, a tire technician can measure the rim instead. 

## Reading the tire sidewall next to the rim 

A tire size such as 140/70-17 tells you the tire's width, aspect ratio, and the rim diameter it is built for. The last number, 17 in this example, is the diameter that must match the rear rim diameter. A mismatch between tire and rim means the tire cannot seat correctly. 

The first number of a metric tire size is the tire width in millimeters, which is not the same as rim width. Tire width always exceeds rim width, and the difference depends on the tire's profile and the maker's approved rim range. Compare the rim width against that approved range, not against the tire width label. 

The tyre size for a scooter or motorcycle may be written in inches instead, such as 3.50-17, especially on smaller machines. In that format the second number is still the rim diameter, so the same matching rule applies. Write both the rim stamping and the sidewall size down side by side. 

## Why the model name is not enough 

Model-specific wheel specifications can change between trim levels, production batches, and market versions of the same name. One model badge can cover a spoked wheel and a cast wheel with different widths. Use the model name to find the right part group, then confirm the stamping on your own rim. 

A motorcycle rim size chart is a useful cross-check, but it summarizes what a maker listed, not what sits on your machine. Charts also mix front and rear figures, and mixing them is an easy mistake. Treat a chart as a lead and the rim stamping as the final word. 

Accessories such as a wider rear tire or a different wheel change the fitment without changing the model name. When a bike has been modified, only a physical check of the rim and a clearance check tell you what is really there. Confirm before you buy any tire or rim. 

## Matching rim width to the tire 

Rim width controls how the tire's sidewall sits and how the contact patch takes its shape. Each tire maker publishes an approved [rim width range](/articles/approved-rim-widths-by-tire-size-checking-tire-and-rim-compatibility/) for every tire size, and fitting outside that range changes the tire's profile. A tire on a rim that is too narrow or too wide can wear unevenly and handle poorly. 

A wider rim pulls the same tire into a flatter profile, while a narrower rim makes the profile rounder. The effect on steering and grip depends on the tire construction and the bike, so follow the tire maker's range rather than a rule of thumb. Rim width and rear rim diameter are separate figures and both must be right. 

Clearance to the swingarm, chain, brake parts, and fender limits how wide a rear tire and rim can go. Check gaps with the suspension at both extremes of travel, because a static check can miss contact. A trained specialist should judge clearance when you change rim width. 

## Checking diameter and bead seating 

Rear rim diameter must equal the bead seat diameter named in the tire size, and there is no safe tolerance for a mismatch. A 17 inch tire belongs on a 17 inch rim, and a 16 inch tire will not seat on an 18 inch wheel. Markings can be misread, so count the diameter digits twice. 

A wheel described as 17 inches measures the bead seat, not the outer edge of the flange. The overall wheel diameter is larger than the nominal figure because the flanges add height. Measure the flange edge only if you account for that difference when comparing. 

Seating a tire on a rim needs the correct bead lubrication, controlled inflation, and a restraint such as a safety cage. This work can injure a person if a bead lets go under pressure, so leave mounting to a trained tire technician. Your job is to supply the right rim and tire figures. 

## Comparing listed figures with the wheel 

A rim size chart for a motorcycle lists width and diameter, and you can compare those figures with your stamping in a moment. Use the table below as a structure for the comparison, filling in what your own wheel shows. The column labels describe the fields, not any particular model. 

Write the stamped rim width and the stamped rear rim diameter in one row, then add the tire sidewall figures. Any disagreement between the rows tells you which part to verify again. Keep the note with the bike for the next tire change. 

The same comparison works for a scooter rear wheel, though the sizes are smaller. A tyre size for scooter use often appears in inches, so convert carefully or copy the number exactly as printed. Precision at this step prevents a wasted purchase. 
| Field | Where to find it | Example format | 
| Rim width | Rim stamping | 2.50 | 
| Rear rim diameter | Rim stamping | 17 | 
| Tire width | Tire sidewall | 140 | 
| Aspect ratio | Tire sidewall | 70 | 
| Tire rim diameter | Tire sidewall | 17 |  

## When to involve a tire technician 

A tire technician should confirm the fitment when the rim stamping is missing, faint, or contradicted by the tire fitted. Measurement of a rim needs calipers and knowledge of where the bead seat lies. A wrong reading here can lead to a tire that will not seat or that rubs. 

Ask the technician to check rim width against the tire maker's approved range as well as the diameter. Ask for a clearance check at full suspension travel if the wheel or tire is not the original size. These checks take little time and settle the question. 

Keep the confirmed figures with the vehicle documents so the next purchase starts from a known size. A written note of rear rim diameter and rim width saves a repeat of the whole check. Update the note whenever a wheel or tire size changes. 

## Rear Rim Size Questions 

### What is the rear wheel rim size of a Splendor? 

The Splendor rear wheel rim size is not fixed by the model name alone, so read the stamping on your own rear rim. Variants and market versions can carry different wheels, and a modified bike may differ again. Confirm diameter and width on the metal before buying a tire. 

### Is the rim size the same as the tire size? 

No, the rim size and the tire size describe different parts, though they must agree on diameter. The rim stamping gives [wheel width and diameter](/articles/wheel-measurements-explained-diameter-width-offset-and-more/), while the sidewall gives [tire width, aspect ratio](/articles/comparing-tire-width-and-aspect-ratio/), and the rim diameter the tire needs. Match the diameter figures and check width against the tire maker's range. 

### Can I fit a wider rear tire on the same rim? 

A wider rear tire may fit the same rim only if the rim width sits inside that tire's approved range. Fitting outside the range changes the tire profile, wear, and handling. A tire technician should confirm the range and the clearance to the swingarm and chain. 

### Where do I find a motorcycle rim size chart? 

A motorcycle rim size chart comes from wheel or vehicle makers and lists width and diameter for a model. Use it to narrow the options, then verify against the stamping on your own rim. Charts can mix front and rear figures, so check the row carefully. 

### What does the number after the dash on a tire mean? 

The number after the dash is the rim diameter the tire is built for, in inches. A tire marked 140/70-17 needs a 17 inch rear rim diameter at the bead seat. Any other diameter will not seat safely. 

### Can I mount a rear tire myself? 

Mounting a rear tire is possible with the right tools, but bead seating under pressure can injure a person if it goes wrong. Use a safety restraint and follow the tire maker's instructions, or hand the job to a trained tire technician. Correct rim and tire figures must be confirmed before any mounting starts.
