# Mobile Tire Sizing Advice

How to read sidewall numbers, match a tire size to your wheel and vehicle, and give a mobile tire service the details it needs to bring the right set.

Mobile tire sizing advice starts with the numbers molded into your current sidewall. Those digits and letters give the width, the aspect ratio and the wheel diameter, and the service uses them to bring a tire that fits. Copy the full string exactly as it appears before you call. 

- Read the sidewall string from left to right to get width, aspect ratio and wheel diameter.
- Check the wheel diameter in the last number before ordering any tire.
- Keep the [load index and speed rating](/articles/tire-load-index-load-range-speed-ratings-material-44528/) at or above the figure in your owner manual.
- Check the date code on the sidewall before a tire is fitted at your location.
 

## Read the sidewall numbers in order 

A tire size such as 225/45R17 is read from left to right, and each part describes one dimension. The first number is the section width in millimeters, measured across the widest part of the inflated tire. The number after the slash is the aspect ratio, which is the sidewall height as a percentage of that width. 

The letter R marks radial construction, which describes how the cords inside the tire are laid out. The final number is the wheel diameter in inches, so the tire must sit on a rim of that exact size. A size of 225/45R17 therefore fits a 17-inch wheel and has a sidewall roughly 45 percent as tall as it is wide. 

Mobile tire service technicians rely on this string because it removes guesswork when a tire is delivered to a driveway or parking lot. Write the whole size down, including any letter prefix such as P or LT. A single mistyped digit can send the wrong tire to your location and delay the fitment. 

## Why the wheel diameter must match 

The wheel diameter is the part of the tire size that cannot be compromised, and a tire only mounts on a rim of the same nominal size. A 16-inch tire will not seal on a 17-inch wheel, regardless of how the width compares. Confirm the wheel size on the rim itself or in the owner manual before you order. 

A mobile service can change a tire at your location, but it cannot change the rim you already have. If you plan to move to a different wheel diameter, say so first, because the tire size, the rim and the vehicle all need to agree. The technician may need to confirm clearance around brakes and suspension before fitting anything larger. 

The wheel diameter also affects the rolling circumference of the assembly, which is the distance the tire covers in one turn. A different overall diameter changes how the speedometer and gearing behave. Keep the overall diameter close to the original figure when you change wheel size unless a trained specialist confirms another setup. 

## Match width and aspect ratio to the rim 

[Section width and aspect ratio](/articles/comparing-tire-width-and-aspect-ratio/) work together, and a wider tire needs a rim within a range the tire maker specifies. The same nominal width can fit more than one rim width, but a stretch beyond that range changes how the sidewall sits. Ask the service to confirm the approved [rim width range](/articles/approved-rim-widths-by-tire-size-checking-tire-and-rim-compatibility/) for the exact tire you plan to buy. 

Moving to a wider tire with a lower aspect ratio keeps the overall diameter similar while changing the look and the sidewall height. A shorter sidewall gives less cushion between the rim and the road, so a rough surface reaches the wheel more directly. Weigh that trade-off before choosing a size for daily driving. 

Clearance inside the wheel well is the other limit, and wide tires can rub on suspension parts or bodywork at full steering lock. The offset of the wheel, meaning how far the mounting face sits from the centerline, shifts the tire in or out. A technician should check clearance with the vehicle loaded as it normally is. 

## Check load index and speed rating 

The load index follows the size as a number, and the speed rating follows as a letter, as in 225/45R17 94V. The load index states the maximum load one tire can carry, and the speed rating states the top speed it is designed for. A replacement tire should meet or exceed both figures for your vehicle. 

Vehicle weight, passengers and cargo all load the tires, so a lower load index reduces the safety margin. The owner manual lists the load and speed figures the maker requires for that vehicle. Do not trade those figures for a lower price or a different tread pattern. 

A replacement tire with a lower speed rating can change handling at higher speeds and may not suit a vehicle built for a higher rating. Give the service the full sidewall string, including these two characters, so the delivered tire matches the specification. When in doubt, ask a tire specialist to confirm the figures for your vehicle. 

## Check the tire date code before fitting 

The date code sits at the end of the DOT string on one sidewall, and four digits give the week and year of manufacture. A tire made a few years ago can still be sound, but rubber ages even when the tread looks new. Ask the service to tell you the code before the tire is mounted at your location. 

Storage conditions affect how a tire ages, and heat, sunlight and ozone exposure all play a part. The tire maker sets its own guidance on service life, so check that guidance rather than assuming a fixed limit. Visible cracks, bulges or a stiff, dry surface are reasons to have a specialist inspect the tire. 

A mobile fitment removes the chance to inspect the tire in a shop before it goes on, so confirm the details in advance. Photograph the sidewall of the delivered tire if you want a record of the size and the date code. Ask the technician to point out the markings when the tire arrives. 

## Give the service complete vehicle details 

Mobile tire sizing advice works best when the service knows the vehicle, not just the tire, so share the make, model, year and trim. Trim level can change the brake size and the wheel fitted at the factory. Two vehicles of the same model year can therefore take different tire sizes. 

Mention any modification already on the vehicle, such as a lift, lowering springs or aftermarket wheels. Modifications change clearance and can make a factory size unsuitable. A trained specialist should confirm that a modified vehicle takes the size you plan to order. 

Tell the service where the vehicle will be parked and whether the wheels can be removed safely at that spot. A sloped surface or a busy roadside can affect what work is possible on site. The technician decides whether the location is safe, and that decision protects both the vehicle and the person working. 

## Plan the fitment before the van arrives 

Ordering a mobile tire fitment means matching the size, the load and speed figures and the date code in one step. Confirm the tire size on the vehicle, compare it with the owner manual, and pass the full string to the service. A short written record of the size avoids confusion on the day. 

Ask what the technician will do if the delivered tire does not match the wheel or the vehicle. A clear answer shows how the service handles a mismatch before it becomes a problem at your location. Confirm who checks the wheel diameter and the rim width range, and whether that check happens before dispatch. 

After fitting, check that the tire size on the vehicle matches what you ordered and that the wheels are torqued as the maker specifies. Recheck the pressure when the tires are cold and follow the vehicle placard, not the number on the sidewall. Keep the paperwork with the date code for later reference. 

## Mobile Tire Sizing Questions 

### What tire size details should I give a mobile service? 

Give the full sidewall string exactly as printed, such as 225/45R17 94V, tells the service the width, aspect ratio, wheel diameter, load index and speed rating. Add the make, model, year and trim of the vehicle. A photograph of the sidewall helps confirm the digits. 

### Can a mobile service fit a different wheel diameter at my location? 

No, a mobile service fits a tire to the wheel already on the vehicle, and the wheel diameter must match the last number in the tire size. A move to a different rim size needs the correct wheels and a clearance check. A trained specialist should confirm that the change suits the vehicle. 

### How do I read the numbers on a tire sidewall? 

Read the sidewall string from left to right, where the first number is the width in millimeters and the number after the slash is the sidewall height as a percentage of that width. The letter shows radial construction and the last number is the wheel diameter in inches. Letters after the size give load index and speed rating. 

### Does a wider tire need a different wheel? 

A wider tire can fit the same wheel only within the rim width range the tire maker specifies. Moving outside that range changes how the sidewall sits and can affect safety. Ask the service to confirm the approved rim width range for the exact tire before ordering. 

### What load index and speed rating do I need? 

Use the load index and speed rating the vehicle maker lists in the owner manual, and treat them as minimums. A replacement tire at or above both figures preserves the margin the vehicle was built for. Give the service the full sidewall string so those characters are not lost.
