# Measuring Tire Width with a Tape Measure

Measure a tire's section width at home with a tape measure. Learn where to place the tape, when a ruler works, and how section width differs from tread width.

Measuring tire width with a tape measure means reading the straight-line distance from the outer face of one sidewall to the outer face of the other. That distance is the [tire section width](/articles/tire-width-chart/), not the tread width. A flexible tape and a flat floor give a usable manual result at home. 

- A tape measure read across the sidewalls gives section width, the widest point of a mounted tire.
- Tread width is narrower, so measure it only if that is the number you need.
- Keep the tape level and at the same height on both sidewalls to avoid a skewed reading.
- A soft or flexible tape follows the tire curve better than a stiff ruler.
- Measure a tire on the rim because mounting changes its shape and width.
 

## What tire width measurement actually reads 

Tire width measurement taken with a tape measure gives the section width of the tire. The section width is the distance across the tire at its widest part, sidewall to sidewall. That value is the first number in a size like 225/55R17, in millimeters. 

Tread width is a different figure, covering only the part that touches the road. A tire's tread width is always narrower than its section width. If you measure across the tread blocks, you get tread width, not the number printed on the sidewall. 

A tape measure gives a manual measurement of the tire itself, not the size the maker states. Slight differences appear from air pressure, load and the shape of the sidewall. The sidewall size is the reference point, and your tape reading is a check on the real tire. 

## Tape measure or ruler for the job 

A flexible measuring tape is the better tool for tire width because it can follow the bulge of the sidewall. A stiff steel tape can bridge over the curve and give a false reading. A ruler measure works only on a narrow, accessible tire where the ruler reaches across the whole face. 

A tape measure for tire width should be long enough to span the tire plus some slack. Household tools like a cloth tape or a retractable tape with a firm hook serve well. Check that the tape is not stretched or kinked before you trust the numbers. 

A ruler [measure tire width](/articles/how-to-measure-mounted-tire-width-and-height/) result is limited by the length of the ruler and the straightness of its edge. For a wide tire, a ruler stays useful as a helper to hold the tape square. The flexible tape remains the main tool for the full sidewall-to-sidewall distance. 
| Tool | Strength | Limitation | 
| Flexible measuring tape | Follows the sidewall curve | Can stretch if pulled hard | 
| Retractable steel tape | Rigid and easy to lock | Bridges the sidewall bulge | 
| Ruler | Straight edge for aligning | Too short for wide tires |  

## Measure tire width with tape measure step by step 

How to measure tire width with a tape measure starts with a flat, level surface and a tire that is mounted on its rim. Let the tire stand upright under its own weight so the sidewalls settle. Note the air pressure, because a soft tire bulges wider at the bottom. 

Hook the tape on the outer face of one sidewall at its widest point. Pull the tape straight across the tire to the outer face of the opposite sidewall. Keep the tape level and read the number where the tape meets the far sidewall. 

Measure at the middle of the sidewall height and repeat at two or three points around the tire. A tire that is not perfectly round gives slightly different readings. Use the largest steady reading as the sidewall width, and ignore a single odd number. 

- Park on a flat, level surface and chock the vehicle.
- Set the tire upright and check the air pressure.
- Find the widest point of the sidewall.
- Hook the tape on one sidewall face.
- Pull level across to the far sidewall face.
- Repeat at several points and compare.
- Record the reading in millimeters.
 

## Tire section width versus sidewall and tread 

Tire section width and sidewall width describe the same span in most everyday use. Both run from the outer face of one sidewall to the outer face of the other. The term sidewall-to-sidewall distance makes clear that the tread is not included. 

Tread width covers only the contact patch area across the tire. The gap between tread edge and sidewall face is the shoulder, which adds to section width. A tape laid across the tread alone leaves out the shoulders and reads short. 

Rim width is the inside distance between the wheel flanges, where the tire bead sits. Rim width is not tire width, and a tape across the rim gives a smaller number. Keep rim width and tire section width as separate figures when you compare sizes. 

## Getting a clean reading at home 

Measuring tire width at home works when the tire is accessible and the tape stays square to the sidewalls. Ask a helper to hold one end of the tape so it does not slip. A second pair of hands keeps the tape level across a wide tire. 

Manual measurement goes wrong when the tape tilts or crosses the tire at an angle. An angled tape reads longer than the true width, so sight along the tape to check it is straight. Keep the tape at the same height on both sidewalls. 

Measuring at home on a mounted tire on the vehicle is possible but cramped. Turn the wheel so the sidewall faces you and use a flexible tape. If the space is tight, take the wheel off and measure on the ground for a cleaner result. 

## Mounted tire width and why it changes 

Mounted tire width differs from the width of a loose tire because the rim spreads and shapes the sidewalls. A tire stretched onto a wider rim sits flatter and reads wider at the sidewall. The same tire on a narrow rim pulls in and reads narrower. 

Air pressure shifts the reading too, since a soft tire bulges outward near the ground. Set the pressure to the value you plan to run before you measure. Measuring a cold tire against a warm one adds another small difference. 

Load on the tire flattens the contact area and pushes the sidewalls outward. Measure with the tire unloaded where you can, or note the load when you record the figure. These effects explain why a tape reading can differ slightly from the sidewall size. 

## Tape measure technique and units 

Tape measure technique matters because a small tilt changes the number. Hold the tape blade flat against the sidewall face and pull it tight enough to stay straight. Read the mark straight on, not from an angle, to avoid a parallax error. 

Record the result in millimeters to match the sidewall size marking. Tire sizes use millimeters for section width, while rim diameter uses inches. Converting one to the other invites mistakes, so keep each unit with its figure. 

Write down the pressure, the tool and the reading so the measurement can be repeated. A record makes later comparisons honest. Where accuracy matters for a fitment decision, have a tire specialist confirm the figure. 

## Tire width measurement questions 

### Can I measure tire width with a tape measure at home? 

Yes, a tape measure gives a usable tire width reading at home. Use a flexible tape across the outer sidewalls on a mounted tire with the correct pressure. Take several readings and keep the largest steady one. 

### Do I measure section width or tread width with a tape? 

A tape across the sidewall faces measures tire section width, the widest point of the tire. Tread width is narrower and covers only the contact area. Decide which figure you need before you place the tape. 

### Is a ruler as good as a tape measure for tire width? 

A ruler works only on a tire it can span in one straight line. Most tires are wider than a household ruler, and a stiff edge bridges the sidewall curve. A flexible measuring tape is the safer tool for tire section width. 

### Why does my tape reading differ from the sidewall size? 

The sidewall size is a nominal figure, and the real tire changes with rim width, air pressure and load. Mounting on a wider rim stretches the sidewalls outward. Measure at the pressure you plan to use and expect small differences. 

### Where exactly does the tape go on the tire? 

Place the tape on the outer face of one sidewall at its widest point. Run it straight across to the matching point on the opposite sidewall. Keep it level and at the same height on both sides. 

### Does rim width count as tire width? 

No, rim width is the inside distance between the wheel flanges where the bead sits. Tire width runs across the outer sidewalls. Keep rim width and tire section width as separate numbers when you compare a wheel and tire.
