Measuring Tire Overall Diameter with a Tape Measure

Learn how to measure overall tire diameter with a tape measure, read the size numbers on the sidewall, and account for sidewall height and rim diameter.

3 min read0 views
— · 0 votes
Contents
  1. Straight-across tape measurement
  2. Wrap method for circumference
  3. Checking against the size numbers
  4. Questions about tire diameter measurement
  5. Can I measure overall tire diameter with a tape measure alone?
  6. What is the wrap method for tire circumference?
  7. How do the size numbers relate to overall tire diameter?
  8. Does tire pressure change a tape measurement of overall diameter?

Measuring tire overall diameter with a tape measure gives you the full height of a mounted tire from the ground to the top of the tread. A tape measure laid straight across the tire face can give a workable figure, but the tire has to sit on a flat surface and the tape has to pass through the center. The number you get is the overall tire diameter, and it is useful whenever you need to compare a tire against the size printed on its sidewall.

Straight-across tape measurement

A straight-across tape measurement runs from the tread surface at the bottom of the tire to the tread surface at the top. Lay the mounted tire on a flat floor and hold the tape vertical through the wheel center. Read the tape where it meets the top tread, not the sidewall. The result is the overall tire diameter, and a tire that is not fully inflated can read low.

Wrap method for circumference

The wrap method measures tire circumference by running a tape measure around the tread instead of across the face. Mark a starting point on the tread, roll the tire one full turn, and measure the distance the mark travels. The distance is the tire circumference, and dividing it by pi gives the diameter. The wrap method suits a tire that stays on the vehicle and avoids reading through the wheel center.

Checking against the size numbers

Tire size numbers on the sidewall let you check your tape reading against a calculated figure. The section width and sidewall height give the height of one sidewall as a percentage of the width. Rim diameter is the wheel size the tire mounts on. Add twice the sidewall height to the rim diameter to get the calculated overall diameter, then compare it with your measurement.

Questions about tire diameter measurement

Can I measure overall tire diameter with a tape measure alone?

Yes, a tape measure alone can give a workable overall tire diameter when the tire sits on flat ground and the tape crosses the center. The reading depends on inflation pressure and on how squarely you hold the tape. A tire that is low on air or leaning on a slope gives a figure that is short of the true height.

What is the wrap method for tire circumference?

The wrap method measures tire circumference by rolling the tire one full turn along a flat surface. You mark the tread, track how far that mark travels, and measure that distance with a tape. Dividing the circumference by pi gives a diameter figure that does not depend on finding the exact center of the wheel.

How do the size numbers relate to overall tire diameter?

The size numbers on the sidewall give the section width, the sidewall height as a percentage of that width, and the rim diameter. Twice the sidewall height plus the rim diameter gives the calculated overall diameter. A tape measurement should land close to that figure, with small differences from tread depth and inflation.

Does tire pressure change a tape measurement of overall diameter?

Yes, tire pressure changes the height of the tire and the tape reading with it. A tire that is underinflated sits lower and measures smaller than the same tire at its rated pressure. Check the inflation first, then measure, so the diameter figure matches the tire as it runs.

Latest articles