# Load Range D Tires for Towing

Learn what load range D means for a towing tire, how its ply rating and load capacity relate, and how to match it to your vehicle and trailer axles.

Load range D tires for towing carry a heavier load rating than lighter passenger-car tires, which matters when a truck or trailer axle is loaded. Load range D is a sidewall letter that groups tires by their rated load capacity at a given inflation pressure. Reading it correctly tells you whether a tire suits the tow vehicle or the trailer it pulls. 

## What the D letter means 

Load range D marks a tire built to carry more load than a standard passenger tire of the same size. The letter describes the tire's load capacity and the inflation pressure it needs to reach that capacity. A D load range tire generally corresponds to an older ply rating of eight. The ply rating is a legacy term and does not count the actual fabric layers in a modern tire. 

## Reading the load capacity figures 

Load capacity for a load range D tire is printed on the sidewall as a load index or a weight figure at a stated pressure. The capacity only applies when the tire is inflated to the pressure listed for that load. Axle ratings and tire capacity must be considered together when you plan a towing setup. A tire with enough load range can still be overloaded if the axle or hitch setup exceeds its own limit. 

## Matching D range to your towing setup 

Towing tires must match the load the vehicle and trailer place on each axle, and the door placard states the tire size and pressure for the tow vehicle. Trailer tires follow the rating marked on the trailer or its axle, not the rating of the tow vehicle. Moving to a higher load range can change ride firmness and the pressure you run. A trained tire specialist should confirm any change of load range on a vehicle. 

## Questions about load range D tires 

### What does load range D mean on a towing tire? 

Load range D is a sidewall letter that sets a tire's load capacity and the inflation pressure needed to reach it. It groups the tire with others of similar capacity rather than describing its size. The D letter generally matches a legacy ply rating of eight. The actual load figure is printed on the sidewall beside it. 

### Is a D load range tire the same as an 8 ply tire? 

A D load range tire is generally labeled with an eight ply rating, but the ply rating is a legacy measure rather than a count of real fabric layers. Modern tires use fewer, stronger layers and still carry the old ply number for comparison. Look at the load capacity figure on the sidewall for the reliable number. The ply rating alone does not set the tire's safe load. 

### Can I use load range D tires for towing a trailer? 

Load range D tires can suit a trailer only when the trailer or axle is rated for the load they carry at their stated pressure. The rating marked on the trailer or its axle takes priority over the rating of the tow vehicle. Check the load figure on the tire sidewall against the load on each axle. A trained specialist should confirm the match before you tow. 

### How much load can a load range D tire carry? 

Load capacity of a load range D tire depends on its size and on the inflation pressure stated on the sidewall for that load. There is no single weight for the whole load range, so you must read the figure printed on the specific tire. Capacity drops if you inflate below the stated pressure. Compare the sidewall figure with the load each axle carries.
