# Load Index and Speed Rating Confusion

Clear up load index and speed rating confusion: find both codes on the sidewall, read the load capacity chart, and match a tire to your vehicle correctly.

[Load index and speed rating](/articles/tire-load-index-load-range-speed-ratings-material-44528/) confusion comes from one small code on the sidewall that holds two different numbers. The load index is a number that maps to the tire load capacity in a chart, and the speed rating is a letter that marks the top speed the tire is built for. They sit side by side, so it is easy to read one as part of the other. 

- The load index number gives load capacity through a chart, and the speed symbol letter gives the maximum speed.
- Both codes appear together in one string on the sidewall, just after the tire size.
- Read each code separately and look up the load index in a chart rather than guessing from the number.
- Never fit a tire with a lower load index or speed rating than the vehicle maker specifies.
 

## Why the two codes get mixed up 

Load index and speed rating confusion starts with one compact string on the sidewall. A marking can read 225/45R17 94W, where 94 is the load index and W is the speed symbol. Drivers scan the whole string as a single unit and lose track of which part does what. 

The two values answer different questions and use different scales. The load index is a plain number that points to a row on a load capacity chart in kilograms or pounds. The speed rating is a letter that stands for a maximum speed, so it moves through the alphabet, not through numbers. 

The pair always follows the size, and a load range letter or a service description can sit nearby. Sizes for light trucks and reinforced passenger tires may add extra characters around the same pair. Each character answers a separate question, and reading them one at a time removes the confusion. 

## Where to find load index and speed rating 

The load index location on the sidewall is the end of the main size string, on the outer face of the tire. A typical sequence shows width, aspect ratio, construction and rim diameter first. The service description, with the load index number and the speed letter, closes the string. 

Some tires print the service description twice, once on the outer sidewall and once on the inner. This duplication makes the codes readable whichever way the tire is mounted. The load index and speed rating stay in the same order, number first and letter second, so the pattern holds. 

Check both sides when one face is hidden or worn. A separate molded block may repeat the maximum load and maximum speed in plain figures, apart from the size string. Those figures confirm the short code but do not replace it, because the code is what the vehicle specification refers to. 

## Reading the load index number 

The load index is a code number from a load index chart, and each number matches a fixed tire load capacity. A higher number means more carrying ability, but the step between numbers is not a single unit of weight. You read the capacity from the chart, not from the size of the number itself. 

Load index values run from small numbers for compact tires up to high numbers for heavy-duty applications. A load index of 91 lands near the lower part of the range for passenger cars, while truck sizes climb well past 100. The load capacity chart is the only reliable translation of the number into kilograms or pounds. 

One tire carries the load, so a car needs the index to cover its axle weight with a margin. The vehicle maker sets the required load index for the car, and the tire must meet or exceed it. Fitting a lower load index than the plate or manual states is not acceptable for road use. 
| Load index | Meaning | Where you check it | 
| Number after the size | Maps to load capacity in a chart | Tire sidewall and load capacity chart | 
| Service description | Load index plus speed letter together | End of the size string on the sidewall | 
| Vehicle requirement | Minimum load index for the car | Tire placard or owner manual |  

## Reading the speed rating letter 

The speed rating letter, also called the speed symbol, sets the top speed a tire is built to sustain under load. Letters run from low speeds through to high performance values, and each letter has one assigned speed. A higher letter does not raise the load index, because the two scales stay separate. 

The speed symbol appears after the load index in the service description, so the letter at the end of the string is the one to read. A tire marked 94W carries a W speed rating, whatever else appears nearby. Mixing the speed letter with other letters on the sidewall causes most of the confusion. 

Vehicle makers specify a minimum speed rating for each model, linked to the car's top speed and its handling demands. A lower speed symbol than the specification reduces the tire's designed margin. Matching or exceeding the specified letter keeps the tire within its intended operating envelope. 

## Load index vs speed rating: two separate scales 

Load index vs speed rating confusion clears once you see that one scale counts and the other spells. The load index moves through numbers that point to a capacity chart, and the speed rating moves through letters that point to a speed. Neither value can be worked out from the other. 

A tire can have a high load index and a modest speed rating, which suits a heavy vehicle with moderate speed needs. Another tire can carry a lower load index with a high speed letter for a light, fast car. The pair describes two independent abilities, and both must meet the vehicle requirement. 

When you compare two tires, check the load index first and the speed symbol second, then compare each against the placard. A higher number in one place and a lower letter in the other is a real mismatch to catch. Reading each code on its own scale is what prevents a wrong choice. 

## Matching the codes to your vehicle 

Your vehicle states the minimum load index and speed rating on its tire placard and in the owner manual. The placard is the reference for the size and the service description the car was built around. Use it before you look at any tire on a shelf. 

A replacement tire should meet or exceed both values, not just one of them. Going up in load index adds capacity but can change ride stiffness, and going up in speed rating changes the tire's construction. Staying at the specified pair keeps the car close to its designed behavior. 

Where a tire carries a reinforced marking, compare its load index against the requirement as printed. Sales listings sometimes show only part of the service description, so confirm the full pair before buying. If you are unsure which code fits your car, ask a tire technician to read the placard with you. 

- Read the tire placard for the required load index and speed rating
- Find the service description at the end of the size string on the sidewall
- Look up the load index number in a load capacity chart
- Read the speed symbol letter and match it to its speed
- Compare both codes with the placard before fitting the tire
 

## Common marking errors to check 

Sidewall load and speed codes can be misread when the string is dusty, worn or partly covered by a rim lip. Wipe the area clean and read the full service description from the size onward. A digit that looks like a letter is a frequent source of a wrong reading. 

Some tires carry a load range letter, such as C, D or E, close to the service description. That letter describes a ply and capacity class for light truck tires, and it is not the speed rating. Treat the load range letter and the speed symbol as separate pieces of information. 

A molded maximum load figure in pounds or kilograms may sit near the bead area, apart from the size string. That figure is a limit for the tire in its application, not a replacement for the load index. If two markings seem to disagree, a trained tire technician should confirm which one applies. 

## When to get a technician involved 

Load index and speed rating choices carry safety consequences, so a doubtful reading deserves a professional check. A tire technician can confirm the placard requirement and inspect the sidewall codes on the car. This is not a job to settle by guesswork from a partial number. 

Fitting a tire below the specified load index or speed rating can affect handling, braking and load safety. Damaged or unreadable sidewall markings also make a tire unfit for confident use. A technician should assess any tire whose codes cannot be read clearly. 

Mounting, balancing and inflation tasks belong with trained staff and proper equipment. Ask for the full service description to be written down so you can compare it with the placard yourself. Clear records of both codes make the next tire purchase straightforward. 

## Questions About Load Index and Speed Rating 

### How do I find the load index and speed rating on a tire? 

The load index and speed rating sit at the end of the size string on the sidewall, for example 94W after 225/45R17. The number is the load index and the letter is the speed symbol. Read the full string from the size onward, and check the inner sidewall if the outer face is unclear. 

### What is the difference between load index and speed rating? 

The load index is a number that maps to a load capacity through a chart, and the speed rating is a letter that maps to a maximum speed. They use separate scales and answer separate questions. A tire must meet the vehicle requirement on both scales. 

### Does a higher speed rating mean a higher load capacity? 

No, a higher speed rating letter does not raise the load index. The two codes are independent, so a tire can carry a high speed letter with a modest load index. Check each value against the placard separately. 

### What happens if I fit a tire with the wrong load index? 

A tire with a lower load index than the vehicle specifies may not carry the intended load safely. Handling and load margin can be affected, and the fitment falls outside the maker's requirement. Always match or exceed the load index shown on the placard. 

### Where do I find the load capacity for a load index number? 

The load capacity for a load index number comes from a load capacity chart, not from the sidewall itself. Look up the number in the chart to read the capacity in kilograms or pounds. Tire technicians use the same chart when they check a fitment.
