Limo Tire Sidewall Markings Explained
Read limo tire sidewall markings with confidence: the size code, width, aspect ratio, rim diameter, load index, speed rating and DOT date code.
Contents
- Reading the tire size code
- Load index and speed rating
- P-metric, LT and the DOT code
- Limo tire marking questions
- What do limo tire dimensions mean on the sidewall?
- How do I find the age of a limousine tire?
- Is load index more important than speed rating on a limo?
- What does the P or LT letter mean on a tire sidewall?
Limo tire sidewall markings pack the tire size code, load and speed limits, and a date code into a few lines of raised letters. For a limousine, the markings tell you whether the tire carries the load the vehicle puts on each wheel. Reading them in order turns a confusing string of numbers into a clear fitment decision.
Reading the tire size code
The tire size code on a limo tire reads as a width, an aspect ratio and a rim diameter in one string. A typical passenger marking looks like 235/55R18, where 235 is the section width in millimeters. The 55 is the aspect ratio, meaning the sidewall height is that share of the width, and 18 is the rim diameter in inches. The R stands for radial construction, which is the build used on limousine tires.
Load index and speed rating
Two smaller markings after the size state how much weight and speed the tire can handle. The load index is a code number that maps to a maximum load per tire, and the speed rating is a letter that maps to a maximum sustained speed. A stretched limousine adds body weight and passenger weight, so the load index matters more than the speed letter. Compare the load index against the axle load the vehicle plate lists.
P-metric, LT and the DOT code
A leading P or LT letter separates a passenger design from a light truck design, and a limousine tire carries the marking that matches its vehicle class. LT tires are built for heavier loads than P-metric tires of the same size. The DOT code is a string molded into the sidewall that ends with a four-digit date code. That code gives the week and year of manufacture, and a tire with no readable date is a fitment concern.
Limo tire marking questions
What do limo tire dimensions mean on the sidewall?
Limo tire dimensions appear as the size code, such as 235/55R18, and each part has a fixed meaning. The first number is the tire width in millimeters, and the second is the aspect ratio as a share of that width. The number after R is the rim diameter in inches, so the tire fits only a wheel of that size.
How do I find the age of a limousine tire?
The age of a limousine tire is read from the DOT date code, the last four digits of the DOT string. The first two digits are the week of manufacture and the last two are the year. A code ending in 24 means the tire was built in that year, and the full DOT string sits on one sidewall only.
Is load index more important than speed rating on a limo?
Load index is the figure to check first on a limo because the stretched body and full passenger load raise the weight on each tire. The speed rating still has to meet the vehicle's capability, yet it rarely limits a guest transport vehicle. Both markings must be at or above what the vehicle plate specifies.
What does the P or LT letter mean on a tire sidewall?
The P or LT letter states the design class of the tire, with P for passenger vehicles and LT for light trucks. An LT tire is built to carry heavier loads than a P-metric tire of the same size. A limousine tire should carry the class that matches the vehicle's rated load, so check the plate before fitting.