# Hyundai Wheel Lock Set: Fitment and Selection

Learn how a Hyundai wheel lock set fits your car: match the lug nut seat, wheel bolt thread and bolt pattern, then keep the lock key code safe.

A Hyundai wheel lock set replaces one lug nut on each wheel with a locking nut that needs a matching key, so the wheels cannot be removed with a plain wrench. Choosing a set for a Hyundai means matching the lug nut seat, the wheel bolt thread and the bolt pattern, then recording the lock key code. The notes below explain each check in plain terms. 

## Match the lug nut seat type 

The lug nut seat is the shape where the nut meets the wheel, and it must match or the nut can loosen or damage the wheel. Hyundai wheels use either a conical seat, a flat seat with a washer, or a ball seat, depending on the wheel design. An original equipment wheel and an aftermarket wheel on the same car can take different seats. Compare the seat of the new lock nut with the seat of the nut you remove. 

## Check the wheel bolt thread 

The wheel bolt thread is the size and pitch of the stud the nut screws onto, and a lock set must carry the same thread. Thread size is written as a diameter and a pitch, and the two parts must both match the Hyundai stud. A nut that starts to thread by hand but binds is the wrong pitch. Do not force a lock nut onto a stud, because damaged threads can strip the stud and the nut. 

## Confirm the bolt pattern and count 

The bolt pattern describes how many studs a wheel has and how far they sit from the center, and a lock set must suit that layout. A Hyundai with four studs takes a four-nut lock count, while a five-stud hub takes a five-nut set. The set should also clear the wheel face and the stud length without bottoming out. Check the pattern against your hub before you buy, since wheel designs change across models and years. 

## Hyundai Wheel Lock Set Questions 

### What is a wheel lock set for a Hyundai? 

A wheel lock set for a Hyundai is a group of locking lug nuts plus a key that fits them. Each locking nut takes the place of one standard lug nut on a wheel, and the key is needed to loosen it. The set protects the wheels from removal with ordinary tools. A set for a Hyundai must match the car's lug nut seat, wheel bolt thread and bolt pattern. 

### How do I find the lock key code? 

The lock key code is a reference number that identifies the key pattern for your lock set, and it lets you order a replacement key. It is printed on the card or tag supplied with the set, and some makers stamp it on the key itself. Record the code and store it away from the car. Without the code, a lost key means matching the pattern by other means or replacing the set. 

### Are OEM lock nuts different from aftermarket locks? 

OEM lock nuts are supplied for the specific Hyundai model, so their seat and thread match the factory wheel. Aftermarket lock sets can fit as well when the seat, thread and bolt pattern match the car. The difference lies in the exact dimensions and the key design, not in the idea of locking. Compare the removed nut with the lock nut before fitting, whichever type you choose. 

### Can a wrong lock set damage my Hyundai wheel? 

A wrong lock set can damage a Hyundai wheel or stud when the seat or thread does not match. A seat of the wrong shape puts load on a small area and can deform the wheel around the hole. A thread of the wrong pitch can strip the stud as it is tightened. Have a trained technician check fitment if you are unsure of the seat or thread size.
