How Width, Aspect Ratio and Diameter Relate in Tire Sizes
Read a tire size like 205/55R16 and see how section width, aspect ratio and rim diameter combine to set sidewall height and overall tire diameter.
Contents
- What each number in the size means
- Calculating sidewall height from the ratio
- Building overall diameter from rim and sidewall
- Tire Width, Aspect Ratio and Diameter Questions
- What is tire width and aspect ratio?
- How do I compare tire width, aspect ratio and diameter between two sizes?
- What does tire profile size mean in the markings?
- What is the tire size relationship between width, ratio and diameter?
Tire width, aspect ratio and diameter are the three numbers in a size such as 205/55R16, and each one describes a different dimension of the same tire. The section width is the tire's width in millimeters, the aspect ratio is the sidewall height as a percentage of that width, and the diameter is the rim size in inches. Reading them together lets you work out sidewall height and overall tire diameter without measuring anything.
What each number in the size means
The tire size format 205/55R16 splits into three values that describe width, profile and rim. The first number is the section width in millimeters, measured across the widest part of the inflated tire. The second number is the aspect ratio percentage, and the letter after it marks the construction type, with R standing for radial. The final number is the rim diameter in inches, which is the wheel the tire mounts on.
Calculating sidewall height from the ratio
Sidewall height comes from multiplying the section width by the aspect ratio percentage. A 205/55 tire has a sidewall of about 113 millimeters, because 205 times 0.55 gives that figure. You calculate tire width from the aspect ratio only in reverse, by dividing a known sidewall height by the ratio. The two figures always move together, so a wider tire at the same ratio carries a taller sidewall.
Building overall diameter from rim and sidewall
Overall tire diameter adds the rim diameter to twice the sidewall height, since the sidewall sits above and below the wheel. The overall diameter formula needs the rim converted to the same unit as the sidewall before adding, because the size mixes inches and millimeters. A 205/55R16 works out to a sidewall near 113 millimeters on a rim of about 406 millimeters. That gives an overall diameter close to 632 millimeters, or roughly 24.9 inches.
Tire Width, Aspect Ratio and Diameter Questions
What is tire width and aspect ratio?
Tire width is the section width in millimeters across the inflated tire, and the aspect ratio is the sidewall height written as a percentage of that width. The width appears first in the size and the ratio second, as in 205/55. Together they set how tall the sidewall stands and how wide the tread area sits.
How do I compare tire width, aspect ratio and diameter between two sizes?
A tire width aspect ratio diameter comparison starts by writing both sizes in the standard format and converting units. Work out each sidewall height, then each overall diameter, and line the results up side by side. Two tires with the same rim diameter can still differ in overall diameter once width and ratio change.
What does tire profile size mean in the markings?
Tire profile size refers to the aspect ratio, the middle number that gives sidewall height as a percentage of section width. A lower ratio means a shorter sidewall on the same width, and a higher ratio means a taller one. The profile is a ratio, not a fixed measurement, so it changes meaning with the width.
What is the tire size relationship between width, ratio and diameter?
The tire size relationship is fixed by one formula: overall diameter equals rim diameter plus twice the sidewall height, with sidewall height set by width times ratio. Change the width and the sidewall moves with the same ratio. Change the ratio and the sidewall moves on the same width, so the three values are never independent.