# How to Use a Tire Repair Kit

Learn how to use a tire repair kit safely: find the puncture, ream the hole, insert a plug with the tire plug tool, and inflate the tire before you drive.

A tire repair kit lets you close a simple tread puncture from the outside so the tire holds air again, and using one means locating the hole, cleaning it with a reamer, and pulling a plug through with the tire plug tool. The kit works on a nail or screw hole in the tread, not on a sidewall cut or a torn shoulder. You follow a fixed sequence of puncture repair steps and finish by inflating the tire to its rated pressure. A kit buys you a trip to a tire shop, where the repair gets checked from the inside. 

## Find and mark the puncture 

The first step of any puncture repair steps is locating the object and deciding whether the hole suits a plug. Leave the nail or screw in place until you are ready, then pull it straight out and mark the hole with chalk or a crayon. A hole in the tread blocks can take a plug, while a sidewall or shoulder damage cannot. Check the tread depth and the tire condition before you start, because a worn or damaged tire is not a candidate for a roadside kit. 

## Ream and insert the plug 

A tire plug tool pushes a sticky strip through the cleaned hole, and the reamer opens the channel first. Push the reamer in and out along the angle of the hole to rough the walls, then load the plug strip through the eye of the insertion tool. Coat the strip with the cement from the repair kit instructions and push it in until only a short tail shows. Pull the tool straight out so the plug stays seated, then trim the tail level with the tread. 

## Inflate and check the repair 

After the plug goes in, inflate the tire and check the pressure with a gauge, because a plug seals only when the tire is at its rated pressure. Listen and look for bubbles at the plug using soapy water, and add air if the bead or the plug leaks. Drive at a reduced speed to the nearest tire shop so the repair can be inspected from the inside. A trained technician should confirm the plug holds and decide whether a patch is needed. 

## Tire Repair Kit Questions 

### What are the emergency tire repair kit instructions? 

Emergency tire repair kit instructions follow one order: locate and remove the object, ream the hole, load and cement the plug, insert it, trim the tail, then inflate and check. Each kit varies in tool shape and cement, so read its own card before you start. Work on a firm level surface with the parking brake set, and keep clear of traffic. A plug seals a tread hole only and does not fix a sidewall. 

### How do you use a tire plug kit? 

You use a tire plug kit by pushing a cement-coated strip through the puncture with the insertion tool after the reamer has cleaned the hole. The plug fills the channel and seals against the tread when the tire is inflated. Trim the excess strip and check for leaks with soapy water. The kit is a temporary fix, and a tire shop should check the repair from the inside. 

### Can a tire plug kit fix any puncture? 

A tire plug kit fixes a simple nail or screw hole in the tread, and it cannot repair a sidewall cut, a torn shoulder or a hole beyond the size the kit states. Damage near the edge of the tread needs a professional inspection. A puncture that keeps losing air after a plug needs a shop check. Never plug a tire that shows a bulge, a cut cord or a separated tread. 

### What is the tire plug tool used for? 

The tire plug tool is the handle and eye that carries the plug strip into the prepared hole. A separate reamer tool cleans and roughens the channel before insertion. Both tools come in the kit and match the plug size the maker supplies. Using the wrong strip size or skipping the ream step can leave a channel that leaks.
