# How to Rotate Tires on a Dually Truck

Learn how to rotate tires on a dually truck: the dual rear wheel pattern, inner and outer tire positions, lug nut torque, and safe jacking practice.

Rotating tires on a dually truck means moving the front tires to the rear axle and the rear duals to the front, following a set pattern so the inner and outer dual tires each change position. The work is done axle by axle with the truck supported on rated stands, and every wheel goes back on with a torque wrench. This page explains the dual rear wheel layout, the rotation sequence, and the checks that keep the wheels seated correctly. 

## Inner and outer dual positions 

A dually runs two tires on each side of the rear axle, an inner dual and an outer dual that are mounted back to back. The two wheels on one side are not interchangeable in position, because the inner wheel faces the frame and the outer wheel faces the road. Rotation moves a tire from the inner side to the outer side only where the wheel design allows it. Check the sidewall for a rotation direction arrow before you plan any swap. 

## Following a dually rotation pattern 

A dually rotation pattern crosses the front tires to the rear and brings rear tires forward, so each tire works a different corner of the truck. Write the sequence down before you loosen a single lug nut, then mark each tire with its starting position. Front tires move to the rear axle, and the rear duals come forward to the front positions. Keep the pattern identical at every rotation so the wear stays even across all six tires. 

## Torque and seating checks 

Lug nut torque on a dually must match the wheel and stud specification for your truck, and the inner and outer nuts are tightened in stages. Snug the nuts by hand first, then tighten in a star pattern to the rated torque with a calibrated wrench. Dual wheels also use a clamp ring or a two-piece nut that must sit flat against the wheel face. Recheck the torque after the truck has been driven and the wheels have settled, and have a trained technician handle any wheel you cannot seat by hand. 

## Dually Tire Rotation Questions 

### Can I rotate dually tires at home? 

Yes, dually tire rotation can be done at home with rated jack stands, a torque wrench and the correct socket for the lug nuts. The truck must be lifted and supported so both rear wheels are off the ground at once, which takes heavy-duty stands. If you do not have stands rated for the truck's weight, a tire shop should do the work. 

### Do inner and outer dual tires swap places? 

Inner and outer dual tires swap places only when the wheel and tire design allows it, because many dual wheels are directional or offset. A directional tire must keep its rolling direction, so it cannot simply move to the opposite side. Read the sidewall markings before you plan the swap and keep each tire turning the way it was built to turn. 

### What is the rotation sequence for a dually truck? 

The rotation sequence for a dually truck sends the front tires to the rear axle and brings the rear duals to the front positions. Each tire changes corner so wear spreads across all six positions over time. Mark every tire with its starting spot and follow the same sequence at each rotation. 

### How tight should dually lug nuts be? 

Dually lug nuts should be tightened to the torque figure the truck maker lists for that wheel and stud size, checked with a calibrated wrench. Tighten in stages and in a star pattern rather than all at once on one nut. Recheck the torque after driving, because new or freshly seated wheels can settle.
