# How to Measure Dual Wheel Spacing

Learn how to measure dual wheel spacing with a tape measure, from inner and outer wheel faces to a true wheel centerline distance, and what each figure means.

How to measure dual wheel spacing starts with a tape measure and a clear idea of which two points you are measuring between. Dual wheel spacing measurement describes the gap or distance between the two wheels of a dually pair, and the number changes depending on whether you read the inner faces, the outer faces or the wheel centerlines. This page explains each measurement, how to take it safely off the vehicle or on it, and how to compare the result with the manufacturer's fitment data. 

## Measure between the inner faces 

A back-to-back measurement reads the clearance between the facing inner wheel faces of a dual pair. Hold the tape square to the wheels and read the gap at the same height on both sides of the axle. Repeat the reading at several points around the wheel to catch a bent rim or uneven seating. The smallest reading tells you the tightest clearance in the pair. 

## Find the wheel centerline distance 

Wheel centerline distance measures from the middle of one dual wheel to the middle of its partner. You cannot read it directly with a tape, so measure the outer face to outer face width and subtract half of each wheel width. A straightedge held flat across each outer face keeps the tape level and square. This figure is the one to compare when checking axle and spacer geometry. 

## Take readings on and off the truck 

On a dually truck spacing can be read with the wheels mounted, but you must reach the inner faces safely. Use wheel chocks and work on level ground, and let a trained technician handle anything that needs the wheels removed. Off the vehicle, lay the wheels flat and measure the same points with the tape supported. Write down each reading with the points you used so the numbers stay comparable. 

## Dual Wheel Spacing Questions 

### How do I measure wheel spacing between dual wheels? 

Measure wheel spacing by holding a tape between the facing inner wheel faces of the pair. Keep the tape square to the wheels and read the gap at the same height on both sides. Repeat at several points to confirm the clearance is even. Record which points you used so the reading can be repeated. 

### What is a back-to-back measurement on dual wheels? 

A back-to-back measurement is the gap between the two inner wheel faces of a dual pair. It describes clearance rather than the position of either wheel center. The figure helps you check that the pair sits evenly and that nothing rubs. Take it at more than one point around the wheel. 

### Can I measure dual wheel spacing with the wheels on the truck? 

Dual wheel spacing can be measured with the wheels mounted if you can reach the inner faces safely. Chock the wheels, work on level ground and keep clear of anything that could move. A trained technician should handle any job that requires removing a wheel. Never put yourself under a vehicle held only by a jack. 

### Why does wheel centerline distance matter for a dually? 

Wheel centerline distance matters because it describes where each wheel sits relative to the axle, not just the gap between them. Measure the outer faces and subtract half of each wheel width to get it. Compare that figure with the manufacturer's fitment data for the axle. Spacing changes can affect load sharing and bearing stress.
