How to Choose a Light Truck Tire Load Range
Learn how to choose a light truck tire load range using the tire placard, axle weight, ply rating and cold inflation pressure, with a clear method.
Contents
- Read the vehicle placard first
- Match load capacity to axle weight
- Understand load range letters and ply rating
- Light truck tire load range questions
- How do I choose a tire load range for my truck?
- Is a higher load range always better?
- What does ply rating mean on an LT tire?
- Which pressure do I use with my load range?
Choosing a light truck tire load range means matching the tire's load capacity to the weight its axle carries, then confirming that capacity at the cold inflation pressure you actually run. The load range letter on an LT tire describes a ply rating and a maximum load at a stated pressure, so it cannot be picked from the letter alone. You start from the numbers on the vehicle, not from the sidewall.
Read the vehicle placard first
The tire placard on the vehicle lists the original tire size and the cold inflation pressure the manufacturer specifies. That pressure, not the maximum printed on the tire sidewall, is the figure you use for daily driving. The placard also gives the gross vehicle weight rating, or GVWR, which caps what the truck can carry. Tire load range selection begins with these vehicle figures because they describe the real duty.
Match load capacity to axle weight
Each axle carries a share of the loaded vehicle, and each tire on that axle carries half of the axle weight. Payload per tire is the number you compare against the tire's rated capacity at your inflation pressure. A heavier build, a full bed or a trailer tongue raises the rear axle figure, so weigh the truck loaded when the duty is uncertain. Load range letters only help once you know the weight they must support.
Understand load range letters and ply rating
Load range letters such as C, D and E step up in carrying capacity at a given size and pressure, and each letter maps to a traditional ply rating. The ply rating is a strength index, not a count of actual fabric layers in a modern tire. A higher load range allows more load at higher cold inflation pressure, and it can support a firmer ride. Choose the range that covers your axle weight at a pressure the wheel and valve can take.
Light truck tire load range questions
How do I choose a tire load range for my truck?
Choosing a tire load range starts with the tire placard and the loaded axle weights of your truck. Compare the payload per tire against the load capacity the candidate tire carries at your intended cold inflation pressure. Pick the lowest range that covers that weight with a margin for how you load the vehicle.
Is a higher load range always better?
A higher load range is not automatically better, because it carries more capacity at higher pressure and can ride firmly when the truck is light. The right load range covers your axle weight without exceeding what the wheel and valve are rated for. Running an oversized range at low pressure can also reduce the tire's load capability.
What does ply rating mean on an LT tire?
Ply rating is a strength index carried over from cotton-cord tires, and it no longer counts real fabric layers. Load range letters group tires by that index, so an E range sits above a D range in capacity. Use the load and pressure tables for your size rather than counting plies.
Which pressure do I use with my load range?
Use the cold inflation pressure that matches your load, checked before the tires warm up from driving. The maximum pressure on the sidewall is a ceiling for the tire's rated capacity, not a daily setting. The vehicle placard pressure suits the original tire, so adjust when the tire size or load range changes and have a tire technician confirm the figure.