# How to Check a Tire Sidewall for Damage

Learn how to inspect a tire sidewall for cuts, bulges, cracks and dry rot. Follow a clear visual check, read sidewall markings and know when to stop driving.

You check a tire sidewall by looking at both faces of every tire in good light, feeling for bulges or gouges, and comparing what you find against the markings molded into the rubber. A cut that exposes cords, a bulge under the surface, or a crack deep enough to show structure means the tire is not safe to use. Any doubt calls for a trained tire technician, because a sidewall failure can injure people and damage the vehicle. 

- Inspect both sidewalls of every tire, turning the wheel so the whole face passes in front of you.
- Feel for bulges and blisters with a gloved hand, since some damage does not show clearly in dim light.
- Cracks from dry rot follow the curve of the sidewall and sit near the lettering or the bead.
- A cut or gouge that reaches the cords removes the tire from service at once.
- Inflate to the pressure on the vehicle placard before the inspection and look again afterward.
 

## Start with the sidewall markings 

Sidewall markings give the tire size, the load index, the speed rating and a date code, and reading them first tells you which tire you are inspecting. The category of this article is exactly that step, because the lettering also shows where the rubber is thinner. A tire sidewall inspection starts with clean markings you can compare against the trim lines molded around the size code. 

Wipe the sidewall with a damp cloth so dust does not hide small cracks. Write down the size code and the date code before you look for damage, then keep those numbers handy for a replacement quote. Sidewall markings near damage help a technician judge whether a defect sits in a structural zone or in a trim line. 

The rim protector ridge and the bead area sit close to the markings, and both places collect curb damage. Read the sidewall before you rotate the wheel, because the letters help you describe the exact spot later. A clear photo of the markings next to the defect saves time at a tire shop. 

## Park safely and set up the inspection 

A safe tire inspection of the sidewall begins on level ground with the parking brake set and the engine off. Turn the wheel so the sidewall faces you, and use a flashlight to rake light across the rubber instead of straight at it. Raking light makes shallow cracks and abrasion visible. 

Wear gloves and keep your hands away from hot brake parts and from the pinch points near the wheel arch. Never crawl under a vehicle held only by a jack, and never place any part of your body beneath the frame. If the tire needs to come off, a trained technician with a proper lift should handle that job. 

Check the sidewalls while the tire is still on the vehicle, then again when it is easy to reach the inner face. The inner sidewall faces the suspension and is out of view from the curb, so it hides damage from a glancing blow. A mirror on a handle or a shop flashlight helps you see it. 

## Read the signs of sidewall damage 

Sidewall damage signs fall into four groups: cracks, bulges or blisters, cuts and gouges, and abrasion. Cracks point to age or dry rot, while bulges show a broken cord inside the rubber. Cuts come from curbs, glass and debris, and abrasion comes from rubbing a curb or a tight garage wall. 

Check the tread and sidewall damage signs together, because a hit hard enough to mark the sidewall often damages the tread shoulder. Sidewall punctures from nails and screws differ from tread punctures, since the rubber there is thinner and flexes more. Any puncture in the sidewall needs a technician's judgment rather than a simple plug. 

Symptoms of tyre sidewall damage include a thump or vibration at low speed, a slow pressure loss and a visible flat spot on one sidewall. Tire sidewall problems that produce a wobble should be checked before the next drive. A tire that loses pressure without a visible object may have a cracked bead area. 

- Cracks running with the curve of the sidewall and near the lettering
- A bulge or bubble that rises above the surrounding rubber
- A cut or gouge deep enough to show white or metallic cords
- Scuffed abrasion rings or flat spots from curb contact
- A puncture hole in the sidewall face, separate from the tread
- Discolored or chalky rubber that feels dry to the touch
 

## Check cracks and dry rot 

Sidewall crack inspection looks for a network of small lines that follow the rubber as it bends. Dry rot appears as many fine cracks, and the surface may feel chalky or stiff. A tire sidewall that looks cracked at the bead or around the letters needs a technician's opinion. 

Light surface crazing differs from a deep crack, and only a hand check and good light tell them apart. Run a gloved fingertip across a crack to feel whether the edges separate. Deep separation at the bead or near the rim edge can let air escape. 

Cracks that spread across the lettering band or reach the shoulder are a reason to stop driving on that tire. Tire sidewall wear that appears as even scuffing is a separate finding from cracking and points to contact with curbs. Record both findings so the technician sees the whole picture. 

## Look for bulges and blisters 

Sidewall bulges and sidewall bubbles mean an inner cord has broken and the rubber can no longer hold its shape. A bulge may appear as a soft rise that disappears when you press it, or as a firm blister. Both are structural damage and the tire should come out of service. 

Cuts and bulges often arrive together after a hard curb hit, since the impact damages the cord and splits the outer rubber. A bulge on the inner sidewall is easy to miss and can be the first defect to fail. Inspect both faces before you decide the tire is sound. 

Do not drive a vehicle with a bulging sidewall to a distant shop, and do not let air out to make the bulge smaller. Fit the spare or call a mobile service, and keep the damaged tire for the technician to see. A bulge does not heal and cannot be repaired. 

## Assess cuts, gouges and abrasion 

Cut or crack inspection separates surface marks from defects that reach the cord body. A shallow cut in the outer rubber may be harmless, but a cut deep enough to show cords, or one that lifts a flap of rubber, retires the tire. Sidewall abrasion from a curb is a surface loss, and it matters when the rubber is worn down toward the cords. 

Cuts and gouges along the rim protector ridge come from parking contact and deserve a close look under light. Sidewall cuts near the bead can open a leak path and need a professional check. Do not push a tool into a cut, because that can widen the damage. 

Use a flashlight along the cut at an angle, and compare its depth with the surrounding groove depth. Compare the sidewall markings near damage so you can point out the exact spot to a technician. When the cut lifts rubber or shows a cord, fit the spare and seek a replacement. 

## Feel the sidewall and recheck pressure 

A visual damage check gains accuracy when a gloved hand passes slowly over the whole sidewall face. A bulge, a lifted flap or a deep gouge shows up as an uneven bump or a sharp edge under the glove. Keep the glove on to protect the skin from glass and sharp rubber. 

Inflate the tires to the pressure listed on the vehicle placard before the check, then look again afterward. Some cracks close at low pressure and open when the tire is properly inflated. A slow leak that returns after inflation points to a bead or sidewall defect. 

A tire pressure gauge reads the current pressure and helps you confirm a slow loss over a few days. Sidewall damage check routines should include the valve stem and cap, since a leaking valve mimics a sidewall leak. Cap the valve and recheck after the tire cools. 

## Decide when to replace or get help 

A tire with cords showing, a bulge or a crack at the bead is not safe for road use. Sidewall damage cannot be patched from the outside, and a shop should judge any sidewall repair. Some sidewall punctures and small injuries may be assessed for a proper repair, but only a trained technician can make that call. 

When you find damage, fit the spare, lower your speed and drive the shortest safe distance to a tire shop. Note the sidewall size code and date code so the replacement matches the axle. Have the wheel inspected for bends at the same time, since a curb hit often damages both parts. 

Keep a written sidewall inspection checklist in the vehicle and repeat the check before long trips. Record each finding with a photo and the date, so a pattern of curb contact becomes visible. A tire that shows new damage after a pothole or curb strike deserves an immediate recheck. 

## Tire sidewall questions answered 

### How can I tell if a tire sidewall is damaged? 

You tell by looking and feeling for four things on each sidewall face: cracks, bulges, cuts that reach cords and heavy abrasion. Rake a flashlight across the rubber and run a gloved hand over the whole face, including the inner side. A bulge or any cord visible in a cut means the tire is not safe. 

### Is a cracked tire sidewall safe to drive on? 

A cracked tire sidewall is safe only when the cracks are shallow surface lines that do not open or reach structure. Cracks at the bead, cracks that lift rubber, or a chalky dry surface call for a technician's check. Deep cracking can lead to a blowout, so fit the spare if the crack looks structural. 

### What do bulges and blisters on a sidewall mean? 

Bulges and blisters mean an inner cord has broken and the rubber can no longer hold pressure safely. The tire should be removed from service and replaced, since a bulge cannot be repaired. Do not reduce pressure to hide a bulge or drive far on it. 

### Can a sidewall cut or puncture be repaired? 

Some sidewall injuries may be assessed for repair by a trained technician, and many sidewall punctures are not repairable. A cut that reaches the cords or a puncture near the bead retires the tire. Never plug a sidewall from the outside and treat it as fixed. 

### What do I need for a safe sidewall inspection? 

A safe sidewall inspection needs level ground, the parking brake set, a flashlight, gloves and a tire pressure gauge. Turn the wheel so the face is visible and check both faces, including the inner sidewall. Keep your body clear of any vehicle held only by a jack. 

### How often should I inspect my tire sidewalls? 

Check the sidewalls as part of a regular tire routine, before long trips, and after any curb strike or pothole. The interval depends on your driving and storage conditions, so set a schedule that fits your use. Record each finding so change over time is easy to see.
