# How to Change Tire Size on an SCT X4

Learn how to change tire size on an SCT X4 by entering tire revolutions per mile, why speedometer calibration matters, and when a specialist should step in.

Changing tire size on an SCT X4 means loading a tune file that carries the new [tire revolutions per mile](/articles/tire-revolutions-per-mile-meaning-material-45766/), so the vehicle computer recalculates speed and shift points. The device itself stores and flashes that file, while the tire figure comes from the tire's published specifications. Speedometer calibration follows from the same value, which is why the number must be right before you write it to the vehicle. 

## Where the tire figure comes from 

Tire revolutions per mile is the count of full rotations a tire makes over one mile, and it is the value the tuner needs. Tire makers publish this figure for each size, so use their specification rather than measuring by hand. A tape measure and a chalk mark give a rough number that drifts with pressure and load. The published figure keeps speedometer calibration closer to true. 

## What the X4 actually changes 

An SCT X4 holds tune files that include vehicle settings such as tire revolutions per mile and axle ratio. Writing that file to the vehicle updates the computer that drives the speedometer and the transmission shift schedule. The handheld does not measure the tire and does not choose a size for you. A tuner or a shop with the right software sets the value inside the file before it is flashed. 

## When to hand the job to a specialist 

Changing tire size on an SCT X4 touches the vehicle computer, and a wrong value can leave the speedometer off or the transmission shifting poorly. A trained tuner or dealership technician should handle the file and the flash when you are unsure of the settings. Keep the stock tune file saved before any change, because it is the route back to original settings. Never flash a vehicle while it is moving or while the battery is low. 

## Questions about SCT X4 tire size 

### Can I change tire size on an SCT X4 myself? 

Yes, you can change tire size on an SCT X4 yourself if you have a tune file with the correct tire revolutions per mile and you follow the device prompts. The handheld walks you through connecting to the vehicle and writing the file. If you cannot confirm the tire figure or the axle setting, a trained tuner should make the change instead. 

### Does the SCT X4 fix my speedometer after a tire change? 

The SCT X4 corrects the speedometer after a tire change only when the loaded tune carries the right tire revolutions per mile. Speedometer calibration depends on that value matching the new tire, plus the correct axle ratio. A file with an old tire figure leaves the reading wrong even though the flash succeeded. 

### What number do I enter for tire revolutions per mile? 

Enter the tire revolutions per mile published by the tire maker for your exact size. That figure already accounts for the tire's nominal dimensions, so it is the starting point for speedometer calibration. Hand measuring a mounted tire adds error from pressure, wear and load. Confirm the number before you write the tune to the vehicle. 

### What happens if the tire size value is wrong? 

A [wrong tire size](/articles/symptoms-of-a-wrong-tire-size/) value on an SCT X4 leaves the speedometer reading high or low and can disturb transmission shift points. The vehicle still runs, but the readings you rely on no longer match the road. Correct the figure in the tune file and flash it again. A trained tuner can verify the setting if the error persists.
