# How Measuring Calipers Work

See how measuring calipers work: the jaws and depth rod, outside and inside measurement, and how a vernier or digital scale turns a gap into a reading.

Measuring calipers work by opening a pair of jaws to fit the gap you want to measure, then reading that gap on a scale or display. The sliding jaw moves along a beam marked with a scale, and each kind of caliper turns the jaw position into a number you can read directly. This page explains the parts, the measuring principle and how to read the result. 

## The parts of a caliper 

A caliper has a fixed jaw on the beam and a sliding jaw that moves along it. The caliper jaws include large outside jaws for gripping an outer surface and smaller inside jaws for spanning a bore or slot. A depth rod extends from the end of the beam to measure the depth of a hole or step. The scale reading sits along the beam, and on a digital caliper the display replaces the vernier scale. 

## Outside and inside measurement 

Outside and inside measurement use opposite faces of the same jaws. For an outside measurement you close the large jaws on the object, and the opening equals its thickness or diameter. For an inside measurement you open the small jaws against the walls of a bore, and the scale shows the span. The depth rod covers a third direction, so one tool measures length, bore and depth. 

## How the scale gives a reading 

The measuring principle is that the sliding jaw carries a short scale that moves past a fixed one. On a vernier caliper the vernier scale has graduations spaced slightly differently from the main scale, and the line that aligns gives the small fraction. A digital caliper display counts the jaw position electronically and shows the value as digits. Both methods report the same jaw opening in a readable number. 

## Measuring caliper questions 

### What is a caliper measuring tool? 

A caliper measuring tool is a sliding gauge with jaws for measuring an outside or inside dimension. It also carries a depth rod for measuring how far a hole or step goes. The tool reads the jaw opening on a vernier scale or a digital display, so one instrument covers several kinds of measurement. 

### How do you read a vernier caliper? 

You read the main scale at the zero line of the vernier scale, then find which vernier line aligns with a main scale line. The main scale gives the large part of the measurement and the aligned vernier line gives the fraction. Adding the two parts gives the final value, so the vernier principle splits one reading into two steps. 

### What are caliper jaws used for? 

Caliper jaws come in two working pairs on the same tool. The large outside jaws close around an object to measure its outer size, and the small inside jaws open against a bore to measure its inner size. Keep the jaw faces clean and square to the surface, because a tilted jaw gives an incorrect reading. 

### Why does a caliper have a depth rod? 

A depth rod lets the caliper measure how deep a hole, slot or step is. You rest the end of the beam on the surface and push the rod down to the bottom of the feature. The scale then shows the depth, so the tool measures in three directions without a second instrument.
