# Honda City Tire Sizes

Read the Honda City tire size and wheel size from the sidewall, the door placard and the trim, and check load index, speed rating and bolt pattern before you fit.

Honda City tire sizes are not one fixed number for the model, so the correct size comes from the sidewall markings, the door placard and the trim of your specific car. This page explains how to read a Honda City tire size and wheel size, what the numbers mean, and which specifications to match before you buy or mount a wheel. 

## Reading the sidewall markings 

Tire size markings on the sidewall give the width, the aspect ratio and the wheel diameter in one line. A marking such as 185/60 R15 means a 185 mm section width, a sidewall height equal to 60 percent of that width, and a radial tire for a 15 inch wheel. The same line carries the [load index and speed rating](/articles/tire-load-index-load-range-speed-ratings-material-44528/), which tell you how much weight each tire carries and how fast it may turn. Note the full string before you compare anything else. 

## Wheel size and bolt pattern 

Honda City wheel diameter must match the wheel diameter in the tire marking, or the tire will not seat on the rim. The wheel also has a bolt pattern and an offset, and these must match the hub of your car for the wheel to center and sit correctly. Honda City bolt pattern and offset values vary by generation, so confirm them against your own car rather than a listing. A wheel with the wrong offset can rub the suspension or sit outside the body. 

## Tire size by trim and year 

Honda City tire size by trim and model year can differ within the same generation of the sedan. A higher trim may roll on a larger wheel diameter with a lower aspect ratio, while a base trim keeps a smaller wheel and a taller sidewall. The OEM tire size for the model year is the reference point, and the door placard states it for your car. Use the placard first and treat online size charts as a cross-check only. 

## Honda City Tire and Wheel Questions 

### What is the Honda City car tire size? 

The Honda [City car tire size](/articles/choosing-tire-sizes-for-a-city-car/) is the string printed on the sidewall of the tires fitted to your car, and it follows the width, aspect ratio and wheel diameter pattern. Because the size changes with trim and model year, no single number covers every Honda City sedan. Check the door placard first, then confirm it against the sidewall markings. Write the full string down before you order tires. 

### What is the Honda City car wheel size? 

The Honda City car wheel size is the diameter of the rim, and it must equal the wheel diameter in the tire marking. A 15 inch tire fits only a 15 inch wheel, so the two numbers work as a pair. The wheel also needs the correct bolt pattern and offset for the hub. Confirm both against your car before fitting a replacement wheel. 

### How do I verify the size on the door placard? 

You verify the size on the door placard by opening the driver door and reading the label on the door jamb, which lists the tire size and the recommended inflation pressure for your car. The placard is set for that vehicle, so it outranks any general size chart for the model. Compare the placard figure with the sidewall markings on the tires already fitted. If the two disagree, the placard states what the car was built for. 

### Do load index and speed rating matter on a Honda City? 

Yes, load index and speed rating matter because they describe the weight and speed each tire is built to handle. A tire with a lower load index than the placard allows carries less weight than the car needs. Fit tires that meet or exceed the placard figures, and keep the same rating across all four wheels. The load index and speed rating sit at the end of the size string on the sidewall.
