Honda ADV160 Front and Rear Tire Sizes

See the Honda ADV160 front and rear tire sizes, how the sidewall numbers read, and why the scooter runs a different size at each end.

7 min read0 viewsHonda ADV160 Front and Rear Tire Sizes
— · 0 votes
Contents
  1. The Honda ADV160 tire sizes at a glance
  2. How to read the front tire size
  3. How to read the rear tire size
  4. Why the front and rear sizes differ
  5. Matching a replacement tire to the ADV160
  6. What happens when the size is wrong
  7. Checking tire size and condition together
  8. Honda ADV160 tire size questions
  9. What is the front and rear tire size of the Honda ADV160?
  10. Can I put the front tire size on the rear of the ADV160?
  11. What do the numbers on the ADV160 tire sidewall mean?
  12. Does the Honda ADV160 need the same tire size front and rear?
  13. How do I know which tire fits my Honda ADV160?

The Honda ADV160 uses a smaller tire at the front and a larger one at the rear, so the two ends do not share a size. The front tire size is 110/80-14, and the rear tire size is 130/70-13. Reading those sidewall numbers tells you the width, the aspect ratio and the wheel diameter at each end.

  • The ADV160 runs a staggered setup: 110/80-14 front and 130/70-13 rear.
  • The first number is tire width in millimeters, the second is the aspect ratio, and the last is the wheel diameter in inches.
  • A 14-inch front wheel and a 13-inch rear wheel are paired on the same scooter.
  • The rear tire is wider and has a lower sidewall profile than the front tire.
  • Fit a replacement tire that matches the size molded on the sidewall of the tire you remove.

The Honda ADV160 tire sizes at a glance

The Honda ADV160 carries two different tire sizes because the scooter uses a staggered setup. The front tire measures 110/80-14, and the rear tire measures 130/70-13. Each size is molded into the sidewall of the tire fitted at that end.

The front tire is narrower and sits on a 14-inch wheel. The rear tire is wider and sits on a 13-inch wheel. That mix of a taller front wheel and a wider rear tire shapes how the scooter steers and puts power down.

A staggered setup means the front and rear sizes are not interchangeable. A tire built for the rear cannot be moved to the front, and the reverse is also true. Check the size at the end you are working on before you order anything.

PositionTire sizeWheel diameter
Front110/80-1414 inches
Rear130/70-1313 inches

How to read the front tire size

The front tire size 110/80-14 breaks into three sidewall numbers. The 110 is the tire width in millimeters, measured across the widest part of the inflated tire. The 80 is the aspect ratio, which is the sidewall height as a percentage of the width.

On the front tire, 80 percent of 110 mm gives a sidewall height of about 88 mm. The 14 at the end is the wheel diameter in inches that the tire is built to fit. A 14-inch front wheel takes only a 14-inch tire.

Aspect ratio is a figure, not a measurement in millimeters, so it changes with width. Two tires with the same aspect ratio can have different sidewall heights. The sidewall numbers describe the tire's geometry, not its tread pattern or its rubber compound.

How to read the rear tire size

The rear tire size 130/70-13 follows the same three-part pattern. The 130 is the width in millimeters, and the 70 is the aspect ratio. The 13 is the wheel diameter in inches.

On the rear tire, 70 percent of 130 mm gives a sidewall height of about 91 mm. The rear tire is wider than the front tire and sits on a smaller wheel. That combination keeps the rear contact patch broad while holding the seat height within the scooter's design.

The lower aspect ratio on the rear tire means a shorter sidewall relative to its width. A shorter sidewall flexes less under load, which suits the driven end of a scooter. The number does not tell you the load rating or the speed rating, which appear separately on the sidewall.

Why the front and rear sizes differ

Honda pairs a 14-inch front wheel with a 13-inch rear wheel to balance steering and traction on the ADV160. The narrower front tire rolls easily and turns in quickly at low speed. The wider rear tire carries the engine load and puts drive to the ground.

A taller front wheel rolls over uneven surfaces with less deflection than a smaller one. The smaller rear wheel leaves room for the engine and swingarm packaging. Each end is sized for its job rather than copied from the other.

Staggered sizing is a design choice, so the two sizes belong together as a set. Changing one end without regard to the other alters the scooter's geometry. Keep the standard sizes when you replace a tire unless a trained technician advises otherwise.

Matching a replacement tire to the ADV160

A replacement tire for the Honda ADV160 must match the size on the sidewall of the tire being removed. Read the size string on the old tire before you shop, and confirm the new tire carries the same numbers. Width, aspect ratio and wheel diameter all need to agree.

Load index and speed rating also appear on the sidewall, and they need to meet or exceed what the scooter requires. A tire of the right size but a lower rating is not a correct replacement. Check both figures alongside the size string.

Mounting and balancing a scooter tire takes proper tools and a torque figure for the axle. If you do not have the equipment and the specification, have a trained technician fit the tire. A poorly seated bead or a loose axle can cause a loss of control.

What happens when the size is wrong

A tire of the wrong size can rub the bodywork, the fender or the swingarm on the ADV160. Extra width may clear at a standstill and contact under suspension travel. A larger diameter can lift the ride height and change how the scooter steers.

A wrong aspect ratio alters the sidewall height and, with it, the gearing and the speedometer reading. A smaller overall diameter makes the engine turn faster for the same road speed. A larger one does the opposite and can make the display read low.

Fitting an ill-sized tire also affects clearance to the brake caliper and the fork legs at the front. Where a size question is unclear, ask a tire technician before mounting. Guessing at fitment risks damage to the scooter and to the rider.

Checking tire size and condition together

The size string on the Honda ADV160 sidewall tells you what tire the scooter needs, and the same sidewall shows the date of manufacture. A four-digit code gives the week and year the tire was built. Age matters even when the tread looks deep.

Inspect the tread depth and the sidewall for cracks, bulges or embedded objects at the same time. A tire can hold the correct size and still be unfit for the road. Wear bars inside the tread grooves show when the tread has reached its limit.

Check tire pressure before a ride and set it to the figure Honda specifies for the scooter. Pressure affects contact patch shape and sidewall flex. A soft tire heats up more and can fail, so a gauge belongs with the scooter's tools.

Honda ADV160 tire size questions

What is the front and rear tire size of the Honda ADV160?

The Honda ADV160 uses a 110/80-14 tire at the front and a 130/70-13 tire at the rear. The front tire is narrower and sits on a 14-inch wheel. The rear tire is wider and sits on a 13-inch wheel, so the two sizes are not interchangeable.

Can I put the front tire size on the rear of the ADV160?

No, the front size does not fit the rear of the Honda ADV160. The rear wheel is 13 inches, and the front tire is built for a 14-inch wheel. Width and clearance at the rear also call for the wider rear size, so keep each size at its own end.

What do the numbers on the ADV160 tire sidewall mean?

Each sidewall number describes one part of the tire's geometry. The first number is the width in millimeters, the second is the aspect ratio or sidewall height as a percentage of width, and the last is the wheel diameter in inches. The string 110/80-14 therefore reads as a 110 mm wide tire with an 80 aspect ratio on a 14-inch wheel.

Does the Honda ADV160 need the same tire size front and rear?

No, the Honda ADV160 runs a staggered setup with two different sizes. Honda fits 110/80-14 at the front and 130/70-13 at the rear as a matched pair. Replacing one end with a different size changes the scooter's geometry and clearance.

How do I know which tire fits my Honda ADV160?

Read the size string molded on the sidewall of the tire you are removing and match it exactly. Also check the load index and speed rating on the new tire against the old one. A trained technician can confirm fitment and mount the tire correctly.

Latest articles