# Flotation Tire Sizes: Sizes and Dimensions Overview

Learn how flotation tire sizes work: what the inch-based format means, how to decode diameter and width, and how to read sidewall numbers on off-road tires.

[Flotation tire sizes](/articles/how-to-convert-inch-and-flotation-tire-sizes-to-metric/) use an inch-based format that puts the overall diameter first and the section width second. This page explains the meaning of a flotation tire size, how to decode its numbers, and how those dimensions compare with metric tire markings. You will see how the notation describes a wide, low-pressure tire built for soft ground. 

## The diameter x width format 

A flotation tire size is written as two inch figures separated by a multiplication sign, such as 35x12.50R17. The first number is the overall diameter in inches, and the second is the section width in inches. Flotation tire notation always leads with height, which is the opposite order from metric sizing. That order makes the size format easy to scan when you compare tall, wide off-road tires. 

## Decoding the sidewall numbers 

Sidewall numbers on a flotation tire decode into three parts: diameter, width and wheel size. In 33x12.50R15, the 33 is the tire diameter and 12.50 is the section width, both in inches. The R marks radial construction, and the final figure gives the wheel diameter the tire fits. Some flotation sizes end in a load range letter or a service description after the wheel size. Reading each position in order removes guesswork from flotation tire size decode. 

## Flotation sizing versus metric sizes 

Flotation tire sizing describes a tire by its measured outside height and width, while metric sizes describe the sidewall height as a percentage of width. A wide low-pressure tire in flotation notation gives you tire diameter and width directly. Metric markings such as 285/70R17 need a calculation to reach the same overall diameter. Flotation sizes therefore suit buyers who compare off-road flotation tire dimensions at a glance and want the footprint spelled out. 

## Flotation Tire Size Questions 

### What does flotation tire size mean? 

Flotation tire size meaning refers to an inch-based sizing system for wide, low-pressure tires that spread load over soft ground. The size states overall diameter and section width directly in inches, with the wheel diameter after the construction letter. This notation grew from off-road use, where a large footprint helps a vehicle float rather than sink. The label describes the tire's geometry, not a promise about traction. 

### How do I decode a flotation tire size? 

A flotation tire size decodes from left to right into diameter, width, construction and wheel size. Take 35x12.50R17: the 35 is overall diameter in inches, the 12.50 is section width in inches, the R means radial, and 17 is the wheel diameter in inches. Any letter or number after the wheel size is a load range or service description, not a dimension. Each field answers one question about tire dimensions. 

### What is the difference between high flotation and standard tire sizes? 

High flotation tire sizes express height and width in inches, while standard metric sizes express width in millimeters and sidewall height as a ratio. A flotation size such as 31x10.50R15 gives overall diameter and section width outright. A metric size such as 235/75R15 needs the sidewall calculation to find the same diameter. Both systems describe the same tire dimensions in different units and order. 

### How does the flotation size format show tire diameter and width? 

The flotation size format lists overall diameter before section width, both in inches. In 33x12.50R15, the tire diameter is 33 inches and the section width is 12.50 inches across the widest point of the sidewall. Because the format leads with height, it shows diameter and width in the order off-road buyers compare them. The wheel diameter follows the construction letter at the end.
