Floor Jack for Car Trunk Storage

Learn how to pick a floor jack that fits your car trunk, check its weight and size, secure it while driving, and lift your car safely when you arrive.

8 min read5 viewsFloor Jack for Car Trunk Storage
— · 0 votes
Contents
  1. Measure your trunk before choosing a jack
  2. Check jack weight and size against your limit
  3. Choose a compact floor jack for trunk use
  4. Secure the jack so it cannot move in the trunk
  5. Lift the car safely once you arrive
  6. Maintain a jack that lives in the trunk
  7. Know when to call a specialist
  8. Questions about trunk floor jacks
  9. Can I keep a floor jack in my car trunk all the time?
  10. What size floor jack fits in a car trunk?
  11. Is a floor jack too heavy to lift into a trunk?
  12. How do I stop a floor jack from sliding in the trunk?
  13. Can I use a floor jack from the trunk to change a tire?

A floor jack can be stored in a car trunk only if its weight and size suit the trunk and you can secure it so it does not move while you drive. A compact floor jack with a low profile and a folding handle fits more trunks than a full-size shop jack. Space alone is not enough, because the jack must also reach the car's lifting point safely.

  • Measure the trunk opening and floor area before you buy a jack.
  • Compare the jack's weight, length, width and saddle height with your trunk space.
  • Strap the jack down so it cannot slide or roll during a stop.
  • Lift the car on level ground and use jack stands before you go under it.
  • A floor jack raises a car; it does not hold it up on its own.

Measure your trunk before choosing a jack

Trunk space decides which floor jacks you can carry, so measure the opening and the floor area first. The opening is often smaller than the trunk floor, and a jack must pass through it. Record the height, width and depth of the opening in the same units as the jack listing.

A tape measure and a helper make this job quicker and safer. Lower the rear seats if they fold, because that changes the usable length. Leave room for groceries, tools and the spare tire, since a jack that fills the trunk is a poor fit for daily driving.

Write the limits on a note and take it to the store or keep it while you shop online. A jack that fits with space to spare is easier to load and unload. The measurement also tells you whether a compact floor jack is needed instead of a larger model.

Check jack weight and size against your limit

Jack weight and size decide whether one person can lift it into the trunk without strain. A steel floor jack is heavy for its capacity, while an aluminum jack is lighter and often costs more. Lifting a heavy jack from the ground into a trunk is a real risk for your back.

Check the length, width and height of the jack when it is fully lowered, because the handle and the saddle add to the footprint. A folding handle saves length, and a low profile helps under a lowered car. The saddle height matters at both ends of the lift, so compare the minimum and maximum height with your car.

Capacity must exceed the weight on one corner of the car, which is roughly a quarter of the vehicle weight. A jack rated well above that figure gives a margin. Do not rely on the label alone, and check the base plate for bending or cracks before each use.

Jack typeWeightTrunk fitHandle
Steel service jackHeavy for one personNeeds a large trunk floorFixed or two-piece
Aluminum service jackLighter to loadFits a mid-size trunkOften two-piece
Compact low-profile jackLightest of the groupFits a small trunkFolding or short
Scissor jackVery lightFits almost anywhereCrank handle

Choose a compact floor jack for trunk use

A compact floor jack trades lifting range and speed for size and weight, which suits trunk storage. These jacks use a shorter frame and a lower saddle, so they may not reach a high lifting point. Match the maximum height to the height your car needs at the jacking point.

Look for a jack with a wide, stable base even when it is small. A narrow base on soft ground can tip, and a tipped jack can drop the car. Steel wheels on the jack roll better on pavement, while some compact models use small wheels that sink into gravel.

The jack must also fit under the car before it lifts, so check the clearance at the jacking point. A low-profile jack helps when the car sits close to the ground. If the jack does not fit under the car, the trunk fit is irrelevant.

Secure the jack so it cannot move in the trunk

Storing a floor jack in a car means the jack must stay still during braking, turning and sudden stops. A loose jack becomes a heavy object that can damage the trunk or injure someone. Straps, a cargo net or a molded tray hold the jack in place.

Place the jack low and toward the center of the trunk floor, not on top of other items. Wrap the handle or remove it so it cannot swing. A rubber mat under the jack adds friction and protects the trunk lining.

Check the tie-down after the first short drive and again on a longer trip. Lifting the jack out needs a firm grip, so keep the carrying handle clear. A jack that is awkward to remove invites careless lifting.

Lift the car safely once you arrive

A floor jack lifts a car, and jack stands hold it up; the jack alone must never support a person under the car. Park on level, solid ground and set the parking brake. Chock the wheels that stay on the ground before you raise the car.

Place the jack saddle under the reinforced jacking point named in the owner's manual. A saddle that misses the point can bend the body or slip. Raise the car slowly and watch the jack as it rises.

Lower the car onto jack stands placed under strong structural points, then lower the jack slightly so the stands carry the load. Keep the jack in place as a backup. Do not work under a car held only by a hydraulic jack, because a seal failure can drop it.

Maintain a jack that lives in the trunk

A jack kept in a car sees temperature changes, road vibration and moisture, so check it before each use. Look for hydraulic fluid around the piston and for a saddle that does not rise smoothly. A jack that bleeds down under load needs service or replacement.

Keep the oil level and the air bleed valve in mind, because air in the system makes the jack feel spongy. Store the jack with the release valve closed and the ram down. Wipe road salt and grit from the frame and wheels.

The trunk is not a toolbox, and heavy items stacked on the jack can bend the handle or the frame. Give the jack its own space and keep sharp tools away from the hydraulic hose. A damaged jack should not be used to lift a car.

Know when to call a specialist

Some lifting jobs need a trained technician, including work under a vehicle on a lift or repair of a leaking hydraulic jack. A floor jack in a trunk is a roadside aid, not a substitute for a workshop. If the jack cannot reach the jacking point safely, stop and get help.

A car with a damaged jacking point, rust around the sill or a modified suspension may need a different lifting method. Ask a qualified mechanic before you raise such a vehicle. The same applies to heavy vehicles and to any car whose owner's manual gives specific lifting instructions.

A roadside service can bring the right equipment when a wheel change is not safe on the spot. Use the jack only on firm ground and only for the job it was made for. Safety comes before convenience every time.

Questions about trunk floor jacks

Can I keep a floor jack in my car trunk all the time?

Yes, a floor jack can live in a car trunk if it fits and is strapped down. Check the tie-down and the hydraulic seal regularly, because a jack that shifts or leaks is a hazard. Remove it when you need the trunk space or carry heavy loads.

What size floor jack fits in a car trunk?

The right size depends on your trunk opening and floor area, so measure both before buying. A compact floor jack with a folding handle takes less length and weight. Compare the lowered height, length and width with your measurements, not with a general figure.

Is a floor jack too heavy to lift into a trunk?

A steel floor jack can be heavy for one person to lift into a trunk, while an aluminum or compact jack is lighter. Weight matters because lifting a heavy jack from the ground can strain your back. Choose a jack you can handle alone, or ask for help.

How do I stop a floor jack from sliding in the trunk?

Strap the floor jack down with a cargo net, straps or a molded tray so it cannot slide. Place it low and near the center of the trunk floor, and use a rubber mat for grip. Check the restraint after the first drive and on longer trips.

Can I use a floor jack from the trunk to change a tire?

Yes, a floor jack can raise a car for a tire change on level, solid ground. Lower the car onto jack stands before you put any part of your body under it, because the jack alone does not hold it safely. Follow the jacking points in the owner's manual.

Read next

Latest articles