Finding Tire Size When the Sidewall Is Unreadable
Learn how to find your tire size without readable sidewall markings by checking the door jamb placard, owner's manual and other vehicle records.
Contents
- Check the door jamb placard first
- Use records when the sticker is gone
- Measure when no record exists
- Tire size questions answered
- Can I find the tire size without the sidewall markings?
- Where is the door jamb tire placard located?
- Does the vehicle registration show the tire size?
- How do I read a tire size once I find it?
Finding tire size when the sidewall is unreadable starts with the vehicle itself, not the tire. The size is printed on the door jamb tire placard, in the owner's manual and on the vehicle tire information label. When a tire has been swapped or the door sticker is gone, other records and a careful measurement can narrow down the original size.
Check the door jamb placard first
The vehicle tire information label on the driver's door jamb lists the original tire size for the vehicle. This placard also shows recommended inflation pressures and load limits for those tires. Read the size as width, aspect ratio and rim diameter, such as 225/60R16. If the placard is faded, photograph it and look for the same label in the owner's manual tire size section.
Use records when the sticker is gone
A tire size from vehicle registration or title paperwork can sometimes identify the factory size, depending on what the registry records. The owner's manual and a dealer parts lookup also list the size fitted to a given trim level. An old tire size lookup through a tire shop may recover the size from a past invoice. Use these records together, because a previous owner may have changed the wheels.
Measure when no record exists
When the markings are gone and no record survives, measure the tire to estimate its size. Measure the wheel rim diameter across the bead seat, then measure the tire's section width at its widest point. A tire size reference chart converts these measurements into a likely size code. Treat any measured size as an estimate and have a trained tire technician confirm it before mounting new tires.
Tire size questions answered
Can I find the tire size without the sidewall markings?
Yes, the tire size can be found without readable sidewall markings by checking the door jamb placard, the owner's manual or the vehicle tire information label. These sources list the size the vehicle was built to carry. Paperwork from a past tire purchase can also supply the size.
Where is the door jamb tire placard located?
The door jamb tire placard sits on the driver's side door pillar, visible when the door is open. This vehicle tire information label lists the original tire size, inflation pressure and load rating. If the label is missing or faded, the owner's manual tire size page repeats the same information.
Does the vehicle registration show the tire size?
The vehicle registration may show the tire size, but this depends on what the issuing office records. Some registrations list only the vehicle identification number and body details. Check the document itself before relying on it, and use the placard or manual as the primary source.
How do I read a tire size once I find it?
A tire size reads as width in millimeters, aspect ratio as a percentage and rim diameter in inches. The letters show the construction type, with R meaning radial. A load index and speed symbol may follow, and those must match or exceed the vehicle's requirements.